I have a 3 year old mac pro running 10.6.8 should i upgrade to the latest software?
Will the upgrade slow down my computer or will it be more beneficial?
Thanks for any info, D.D.D
There is no way to intelligently answer your question (re: performance). Since you are running what is unsupported software (by Apple), I would seriously consider upating to the latest software.
Barry
Similar Messages
-
How do I get iCloud on my 5 year-old MB Pro running OSX 10.7.3? It only shows MobileMe in system preferences.
If your mac is running 10.7.3 and there is no iCloud panel in system preferences, then you need to re-install Lion.
-
I have an Apple Mac Pro. It is almost 7 years old and will not accept FCP X. I have been waiting for Apple to make a new Mac Pro, but I don't know when that will happen.
Any recommendations?Do not put new money today into Mac Pro 2008 or previous. (the FBDIMM memory is too expensive).
Some say skip the 2009 model as the 2010 is better (has built-in support for hex processors) but not a lot more money.
Computers will always be better, faster, and cheaper if you wait. [A new Mac Pro may not be solid on day 1.] At some point, you have to get your work done, and just have to hold your nose and choose from what is avaiable and stable at the moment. -
Upgrading? 3 year-old Mac Pro 3.1 with 8 GB RAM
I have a 3-year old Mac Pro (model 3.1) with 8 GB RAM and 2 Quad Core Intel Xeon processors. The RAM consists of 8 x 1 GB 800 MHz DDR2 FB-DIMM
Two questions:
1) I need tp upgrade my RAM to 16 GB or more to run a new software (memory intensive application). I'm wondering if it's worthwhile to upgrade this system for ~$500 or just buy a new system with newer components. Also, whether the system can effectively use 16 GB of memory
2) Recently my Mac Pro has been very slow and jittery e.g. when I switch between applications. I've already tried things like cleaning up the hard drive / repairing disk permissions with little improvement. The only other thing I can think of doing is wiping the system clean and reinstalling everything. I'm wondering if anyone has had a similar experience, and if there is asomething to do to prevent this from happening in the future.
Thanks!
-Hyou can max out at 32GB
An SSD can make a difference also
Hang in for what/when/if the MacPro6,1
Memory bandwidth OWC
I would add 4 x 4GB to get to 20GB and see how that goes.
Upgrade the hard drive: SSD or 10K WD VR 600GB or something.
Off load your home media data and such to another drive, and go for a lean-mean OS/Apps only boot drive.
Buyer's Guide: Hard Drives for Mac Pro
How To clone -
I have an 8 year old MacBook Air running OS X 10.6.8. Can it handle an upgrade to Lion and then to Snow Leopard or is hardware incapable. Additionally, I have a 3 year old Mac Mini running same OS X 10.6.8, with new solid state hard drive. Can I upgrade that one?
8 years old? Not likely. The first MBA was released in January 2008. It can be upgraded to Lion although it meets only the minimal specifications to run Lion. Snow Leopard would likely perform better than Lion on that hardware.
Lion System Requirements
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Some features require an Apple ID; terms apply.
An Early 2009 Mac Mini is capable of running Mountain Lion.
Upgrading to Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
If you need to purchase Snow Leopard you can still purchase a copy from Apple's online store's telesales agents.[1-800-MY-APPLE (1-800-692-7753) or Customer Service and Sales Support at 1-800-676-2775.] Ask for a Sales Representative.
Third-party sources for Snow Leopard are:
Snow Leopard from Amazon.com
Snow Leopard from eBay
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store.
If you need to purchase Lion call 1-800-692-7753 or 1-800-676-2775. Ask for a Sales Representative. They will check your Apple ID, and email you a code and instructions. The cost is $29.99 (as it was before) plus tax. It's a download.
Be sure your computer meets the minimum requirements:
Apple - OS X Mountain Lion - Read the technical specifications.
Macs that can be upgraded to OS X Mountain Lion
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
Xserve (Early 2009)
Are my applications compatible?
See App Compatibility Table - RoaringApps - App compatibility and feature support for OS X & iOS.
For a complete How-To introduction from Apple see Apple - Upgrade your Mac to OS X Mountain Lion. -
I have a 3 year old MacBook Pro with MAC OSX 10.6.8, iPhoto ’09 version 8.1.2 and have downloaded two software programs: one is Aperture 3.2 and the other is Photoshop Elements 9 (which I got from a friend who didn’t need it).
I am totally happy with the way iPhoto organizes my photos and how I can work with iMovie to create slide shows with music from iTunes, etc.
I have been shooting mostly high resolution jpegs and I continue to learn more and more about photography, post processing etc. I realize that the small adjustments I can make in iPhoto are good, and are adequate most of the time. However, a have started to experiment with shooting RAW images and would like to go the next step, ie. post processing.I am totally technically challenged and need SIMPLE, INTUITIVE programs and am certainly NOT anywhere ready for Photoshop CS whatever!
After having these programs sit on my computer, I decided to try to see if I could figure them out. When I opened Aperture, this is what first comes up.
“Welcome to Aperture 3.2
Your library needs to be upgraded to work with this version of Aperture. Once upgraded, you will not be able to use this library with previous versions of Aperture.
Upgrading a library from previous versions of Aperture 3 generally takes a few minutes or less, though larger libraries will take longer. After that, Aperture 3.2 will upgrade your library's thumbnails, but you can use the application during that time.
Tip: To open a different library, quit Aperture and hold the Option key down while starting Aperture
Current Library Location:
Jadzia (home) -----Pictures------Aperture Library
QUIT UPGRADE”
I have heard horror stories about moving your entire library to Aperture, ending up with 2 libraries, etc. etc. hence my previous reluctance in attempting Aperture. In addition, many of my photography friends are saying: Go with Lightroom 3.....you’ll love it!
So here is my dilemma. I don’t want to mess around with my iPhoto library. All I want to be able to do, is to isolate a few photos, export them to Aperture, Elements, and work on them there, then bring them back into iPhoto.
Can I do this? Should I forget about Aperture and Elements and look at purchasing yet another program like Lightroom?Export those few photos via the File ➙ Export ➙ File Export menu option with Kind = Original to the Desktop. Then import them into the Aperture library. That would keep one copy in your iPhoto library and another in your Aperture library to edit, etc.
You can use Photoshop Elements 9 from within iPhoto as your editor of choice. However, if you edit a raw file in iPhoto with PSE9 the resulting edited version must be saved outside the iPhoto Library and imported back in as a new file. For editing jpegs just do a Save (not a Save As) and it all will be kept within iPhoto.
Using Photoshop or Photoshop Elements as Your Editor of Choice in iPhoto.
1 - select Photoshop or Photoshop Elememts as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window
that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements the Saving File preferences should be configured as shown:
I also suggest the Maximize PSD File Compatabilty be set to Always. In PSE’s General preference pane set the Color Picker to Apple as shown:
Note: to switch between iPhoto and PS or PSE as the editor of choice Control (right)-click on the thumbnail and select either Edit in iPhoto or Edit in External Editor from the contextual menu. If you use iPhoto to edit more than PSE re-select iPhoto in the iPhoto General preference pane. Then iPhoto will be the default editor and you can use the contextual menu to select PSE for your editor when desired.
OT -
Hi, I have a 3 year old Macbook Pro 13" and I accidentally cracked the outer screen of my mac book, however the LCD panel is fine and works well. Please advise what to do. I live in India and I have gone to authorised Apple technicians and they infomed me that I will have to replace the LCD panel as well even though it is not cracked, is this really true or can I just change the outer shell? Also they say that they cannot do it in India... can I do it myself at home?
Since it is 3 years old find a local repair shop that can replace the glass Only. you may have to send it out to a Non Local shop for that but there are some that specialize in doiing that on Mac notebooks.
Apple will ony replace the complete screen enclosure with all normal parts included, LCD, Camera, Aluminum housing and glass as one unit. Which is very expensive. Or you could just use it as a desktop system with external monitor and buy a new notebook. -
I bought the UnZipper, vV1.0.00 (4+) , couldn't download (it reported an error in the end), didn't install it but still, I was charged. Also I can't update "The Unarchiver", could I have any problems with my Mac? It's a one-year-old Mac Pro Laptop. Could you help me please?
Mac Pro, Mac OS X (10.6.8)Check under App Store/Purchases for your purchase. Install it from there again. ... Hopefully you did buy this from Apple's App Store, right!
-
I have a 2 year old macbook pro os x 10.5.8 want to upgrade to lion
I have a 2 year old macbook pro os x 10.5.8 want to upgrade to lion
Mountain Lion Requirements:
http://support.apple.com/kb/HT5444
App Compatibility:
http://roaringapps.com/
Check both above first. Then call Apple Sales & have them send you a retail Snow Leopard Disk(US $29)...there is no download. Update to 10.6.8, then go to Mountain Lion or Lion if you like(US $19).
Don't know if Apple is still selling Lion...you'll have to ask Apple sales when you call. You need Snow Leopard to get the Mac app store where you can then purchase Mountain Lion...Lion is no longer available in the store. -
Bought internal bluetooth card in 5 year old Mac Pro; not working right?
Bought internal bluetooth adaptor for my 5 year old Mac Pro. It searches for bluetooth devices, but dosn't find bluetooth devices; any advice?
I secured it interlanly with the two screws supplied. Had replacement card sent out, but same thing?
Using it with Apple Magic Mouse. I know mouse works as I tried it on friends new iMac.
Using latest Snow Leopard, and have seperate boot drive with Lion. Dosn't work on either.
Bluetooth ikon shoes in bar at top, and all software functions normally, just dosn't detect anything?
Thanks.Try smc and pram reset.
-
Have a 2 year old macbook pro that won't turn on--logic board?
We have a 2 year old Macbook Pro that will not turn on. A computer repairman said it's probably the logic board. Does Apple warrant that or are we just out $1,700?
When you attach the power adapter, does the led light up? If so, what color?
What happens if you press the external battery check button?
Have you tried a SMC reset?
http://support.apple.com/kb/ht3964
Have you had it evaluated at an Apple store genius bar or an AASP?
Ciao. -
I have a 5 year old Mac Book with OS 10.6.8 and it can not be upgraded to Mountain Lion. I just got an iPad with retina. How do I get an iMovie project onto my iPad?
I have a 5 year old Mac Book with OS 10.6.8 and it can not be upgraded to Mountain Lion. I just got an iPad with retina. How do I get an iMovie project onto my iPad?
-
I have a 2 year old MacBook Pro and the superdrive has stopped working, it won't take discs in as if there is one already inside but iTunes or the dvd player doesn't recognise that there is a disc inside and if there is it can't be ejected, i have tried shutting down and restartinf while holding down the trackpad, as recommended on some forums but that has done nothing
It might be a huge coincidence but the drive was working fine before i installed lion?Installing Lion would not cause the superdrive to stop working. Are you unsure as to whether or no a cd/dvd is inside? Something may be broken inside and you should consider bringing it in for service.
-
I have an 3 year old mac and would like to update to osx 10.6 or later. when I look for updates, it says that it has no software updates for my computer... help?
You need to buy it on DVD.
(96867) -
i have an 6 year old mac mini with issues that started two weeks ago. I can turn it on , get blue screen and turning circle and nothing else......help !
Hi,
Have you tried some of these? http://support.apple.com/kb/ht1533
The first things I would try would be to press shift during start up, this will boot into safe mode.
I think you'll need to purchase a copy of Snow Leopard to re-install the OS.
There's another couple of suggestions here; http://support.apple.com/kb/TS1417 where you can boot into single user mode and look at repairing disk permissions if that's the problem.
I would hope that if you could boot into safe mode or single user mode, then that may automatically rectify your current issue. If not, then I'm pretty certain that a fresh install will be the ultimate answer.
Maybe you are looking for
-
EDIT field in ALV GRID and on SAVE it has to update the DB Table
Hi Experts, I have searched lot of forums... But i had not got the exact solution for this... I have multiple records that displayed in the ALV output screen and i had modified more than one record and then click on save. It has to modify all the lin
-
Read values from html response
Hi, I am trying to make a call to an API using UTL_HTTP POST method over SSL and read the response html page and extract the values from the reponse. I am able to call and get a response back in html format. I have stored the html response in a clob
-
Bean Managed Transactions and rollback
Hi Everybody, I am using Bean Managed Transactions in a Message Bean which is called every some time by an EJB3 timer. This Message Bean subsequently calls a Session Bean which uses Container Managed Transactions and uses the default transaction attr
-
Hopefully 3rd time lucky but PLEASE HE
I have recently bought a cd player/tape deck combo unit with a USB port for docking the mp3 player. The Creative Zen I have,when connected says no device found.Yet my daughters $20 mp3 toy connects no problem.Any ideas?
-
Email message redirect - purpose of this function??
I had always thought that the message redirect function in Mail was effectively a shortcut to start a new message with the identical body to a message already in my inbox. As a result I've had quite a disaster. I customized some Apple stationery with