I have a 3g micro sim for my ipad but i still can't access the internet?

Hi there,
I have an ipad 2 and my micro sim just arrived to use 3G internet, however when I put the sim into the ipad I still have NO ACCESS to the internet. Please help!

Is it a different network? Settings: Cellular Data : APN Settings  If you have changed networks then it will need the new network's settings which can be manually entered or by hooking up to iTunes.

Similar Messages

  • HT4623 I have downloaded and installed IOS6 for my IPad I am now unable to access the internet on IPad any help would be appreciated.

    Having downloaded and installed IOS6 for IPad ,I can no longer access internet on IPad.Any solutions ?

    1. Turn router off for 30 seconds and on again
    2. Settings>General>Reset>Reset Network Settings

  • I have been with google for while now but I still can't access to google wallet, Would you please show me how? thanks

    I HAVE BEEN WITH GOOGLE FOR WHILE NOW BUT I STILL CAN'T ACCESS TO MY GOOGLE WALLET, BOTH ACCOUNTS, PERSONAL AS WELL AS BUSINESS. WOULD YOU PLEASE SHOW ME HOW? THANKS

    Seems like that would be a better question for a Google forum since it it Google's app. Here is a link about it from Google:
    https://www.google.com/wallet/
    If you need further help, I would suggest you post to a Google forum.
    GB

  • I have enabled cookies, but I still can't access the website. HELP!

    I have enabled cookies, but I still can't access the website. I keep getting a pop up asking me to enable cookies. How do I fix this?? See screenshots. HELP!!!

    See also:
    *http://kb.mozillazine.org/Websites_report_cookies_are_disabled
    Can you post a link to a publicly accessible page (i.e. no authentication or signing on required)?
    You can also check if DOM Storage is enabled.
    *http://kb.mozillazine.org/dom.storage.enabled
    You can check to make sure that you do not run Firefox in permanent Private Browsing mode (Never remember history).
    *https://support.mozilla.org/kb/Private+Browsing
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    See also:
    *https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
    *Use a compressed image type like PNG or JPG to save the screenshot
    *Make sure that you do not exceed the maximum size of 1 MB
    You can also try to crop images and only keep the relevant part(s) and possibly save them with a higher compression value.

  • TS1398 My Ipad was working but I now can't access the internet. I have tried resetting and turning Wifi on and off.  It is just showing as buffering all the time?  Please help

    My Ipad was working on the internet but it now won't connect.  I have tried resetting the network and turning Wifi on and off.  When trying to connect it is continuously buffering.  Can anyone please help??  Thanks in advance

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • I have uninstalled and reinstalled iTunes abount 10 times now and still can't access the iTunes s

    I can't get into the iTunes store.  It looks like it is loading, then it stops and nothing happens.  No error message. Nothing.  I'm on a Dell PC windows 7.  Help.

    sharonfrompasorobles try looking here for an answer to your problem:
    https://discussions.apple.com/message/16599932#16599932

  • In iTunes 11.0.2.26, an Albums search by track names returns albums as if they only have one track on them, but I still want to access the entire album. How can I have the search results show the entire album (with just the searched for name highlighted)?

    Hello, all.
    In iTunes 11.0.2.26, an Albums search by track names returns albums as if they only have one track on them, but I still want to access the entire album. How can I have the search results show the entire album (with just the searched for name highlighted)? For instance, I'm wanting to play an album with a particular track on it or I'm searching for albums that include that track. iTunes incorrectly assumes that all I'm after is that one track and then incorrectly displays the album as if there is only one ttrack on it. This is a bonkers default setting. Can I change this?

    Click the search magnifying glass and uncheck "Search entire library".
    Type in the name of the track.
    Click the album of interest to show tracks.
    Select the track.
    Press the X in the search box to clear the search.
    Double click the track you want to start playing first.
    tt2

  • Firstly, I can't open iPhoto on my macbook as of a few days and could it have anything to do with a problem I have updating my iPhone's software as I've downloaded extra iCloud storage but I still can't get the iPhone to recognise the space for software

    Firstly, I can't open iPhoto on my macbook as of a few days and could it have anything to do with a problem I have updating my iPhone's software as I've downloaded extra iCloud storage but I still can't get the iPhone to recognise the space for software

    No. With the amount of information you've provided it's impossible to offer a potential solution.  We can't see your computer so we need to know the details of your problem and setup, i.e.:
    what version of iPhoto are you using?
    what system version are you running?
    what do you see when iPhoto opens?
    what fixes have you tried?
    where is your library located?
    did you apply any updates or upgrades just prior to the problem occurring?
    are you running a "managed" or "referenced" library?
    what type of Mac?
    how much free space on your boot drive?
    For the iPhone issue ask in the iPhone forum.
    OT

  • I have had an EE account for 3 weeks now and still can't text or receive calls

    I have had an EE account for 3 weeks now and still can't text or receive calls

    What did your carrier say when you reported the problem to them?
    Who is your carrier? Are they on this list? http://support.apple.com/kb/HT1937?viewlocale=en_US&locale=en_US

  • I have  purchased house locator apps for my ipad but Icahn not find any house in India  example  my own house ,I can not see.

    I have  purchased house locator apps for my ipad but Icahn not find any house in India  example  my own house ,I can not see. again I want to buy cinema apps  but it shows transecting problem but other apps are purchased easily by my same card.

    I actually have already activated it the passport on AT&T and you are correct as long as Verizon continues with this whole must have CDMA than eventually Verizon will be in Sprints spot. Have to keep up with the changing landscape. As we all know blackberry did not do. However this new passport is so amazing and has that wow factor I think they could be onto something. Let's hope they stay on this path because they are the only phone I use. While there are a lot of great phones out there I am a blackberry user.
    I most likely will not go with the classic because I can't see me going to a smaller screen when I have this one. I have been wanting a large screen keyboard for so long. The keyboard does take some getting used to, and with the passport 2 I'm sure they will correct those things.

  • I found how to delete a series from my ipad, but it still won't download the last episode of the new series I am trying to have.  What have I done wrong?

    I found how to delete a series from my ipad, but it still won't download the last episode of the new series I am trying to have.  What have I done wrong?

    What is the GarageBand version that your friend is using?
    If it is GarageBand '11, version 6.0.5, you can buy GarageBand '11 as a boxed retail version with the iLIfe '11 bundle, e.g. from Amazon.
    Then you can upgrade GarageBand '11 to 6.0.5, using this upgrader from the Support page:
                     GarageBand 6.0.5
    GarageBand 6.0.5 will work well with your system.  But if your friend is using the newest GarageBand 10, this will not help. Then ask your friend to send you audio files for each track, so you can recreate the project from the audio.  Or your friend could also use GarageBand '11 for the projects you want to share, that will run well in all newer MacOS X versions, even with GarageBand 10.0 installed on the same system.
    -- Leonie

  • My ipad mini doesn't have a web browser! Help. I can't access the internet or iTunes or the app store. The web browser icon isn't even there.Anyone know what to do?

    My ipad mini doesn't have a web browser! Help. I can't access the internet or iTunes or the app store. The web browser icon isn't even there.Anyone know what to do?

    I'd maybe try doing a search for Safari on your iPad first (swipe to the left to search). If it shows up in that search you can go to Settings > General > Reset and choose 'reset home screen layout' which will put it back where it would be by default.
    All else fails? Restore it.

  • I downloaded a film from ITunes in HD and had problems, I upgraded to the latest version of ITunes and have then downloaded the film again in SD on my Windows 7 computer, but I still can't get the film to play, any idea's what to do next?

    I downloaded a film from ITunes in HD and had problems, I upgraded to the latest version of ITunes and have then downloaded the film again in SD on my Windows 7 computer, but I still can't get the film to play, any idea's what to do next?
    I've been working at the same problem for hours now and it's really driving me crazy so any help would be greatly appreciated.

    It is working now. I no longer get the message about the item not being available in the US and I can access the store.

  • My file names have disappeared in grid view. Thery have been replaced with a dark bar along the bottom of the previews. If I toggle using the command u it hide the bar but I still can't see the file name. In list view all the file names are OK.

    My file names have disappeared in grid view. Thery have been replaced with a dark bar along the bottom of the previews. If I toggle using the command u it hide the bar but I still can't see the file name. In list view all the file names are OK.

    The dark bar is caused by the option "Show metadata below image".
    Check the settings for the metadata overlays in Grid view (basic and expanded) by clicking the little "badge" icon below the Browser and selecting "Edit". Is the filename still enabled in the list? And in a high enough position to have precedence for other metadata tags, if the space does not suffice to show all selected tags?
    Regards
    Léonie

  • I have switched of the Badges but I still can not export the images?

    I have switched of the Badges but I still can not export the images? because the badges are still showing on the  images.

    If you are seeing something overlayed on the exported image, this is probably not caused by the badges overlays, but by a watermark. 
    Check your export preset, if a watermark is enabled. In the "Export" panel set the "Export Preset" to "Edit" and check the settings for the preset you want to use. Disable any watermarks.

Maybe you are looking for

  • FCC in receiver file adapter

    Hi,    My scenario is proxy to flat file(FCC). The incoming structure has following format: Header1 Item1 Header2 Item1 Item2 Item3 Header3 Item1 Item2 Control Each Header can have multiple item fields. The last line is control record. So the structu

  • Mp3 player does not sow in itunes window

    My mp3 player use to come up in the itunes window when I would plug it into the usb port. I can not get it to so this tonight. Did something happen with the last itune upgrade?

  • How do I transfer a bought or rented movie from my IPhone to me IMac?

    I just bought one movie and rented 2 on my IPhone 4. I'm just wondering how I add them to my IMac? Any help would be greatly appreciated! Thank you!

  • Do imported emails from pst files get saved to Exchange Server?

    So I exported a user's email into a pst file and I'm importing all of them into his new email address.  My question is whether these newly imported emails will be only available locally or will they be uploaded into the Exchange server (which is TWC'

  • Crashed, file won't open, "Invalid File Format"

    working in DVD SP 4, program crashed, and now I can't open my file. I get a "Invalid Project File Format" error when I try. I've done some searching on here, and tried a few things I've found (making a copy of it, changing some stuff in the resource