I have a 3gen iPod message not working any solutions

I have a 3 gen iPod messages not working any solution

Start here:
iOS: Not responding or does not turn on
You are not really giving ups much information to provide more detailed advice.

Similar Messages

  • Conectivity to videobeam, i already have the accesory but do not works,any configuration or osftware?

    Conectivity to videobeam, i already have the accesory but do not works,any configuration or osftware?

    You have 2 versions of Pages on your Mac.
    Pages 5 is in your Applications folder.
    Pages '09/'08 is in your Applications/iWork folder.
    You are alternately opening the wrong versions.
    Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
    Pages 5 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
    Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
    Anything that is saved to iCloud is also converted to Pages 5 files.
    All Pages files no matter what version and incompatibility have the same extension .pages.
    Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
    Note: Apple has removed over 90 features from Pages 5 and added many bugs:
    http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
    Archive/trash Pages 5, after exporting all Pages 5 files to Pages '09 or Word .docx, and rate/review it in the App Store, then get back to work.
    Peter

  • Hi..I am a web developer I use subdomains for my websites but subdomains like net.tc,com.nu are not working,any solution???

    I have created my website by webnode.com and I wanted to redirect it by com.nu subdomain but any subdomain of my knowledge is not working with my webnode.com or 350.com websites

    I have created my website by webnode.com and I wanted to redirect it by com.nu subdomain but any subdomain of my knowledge is not working with my webnode.com or 350.com websites

  • RelationalOperatorType.CONTAINS not working -- any solution/reason pls ??

    Hi,
    I need to write search logic in which user enters a single character , and search result should contain all the strings that contains the character required.
    I guess RelationalOperatorType.CONTAINS  is the correct one .
    But its not giving result as desired.
    Could anyone pls tell why its not working or any other way to achieve the search criteria  ?
    Regards & Thanks ,
    Vipin.

    Hi Vipin,
    Just check this thing.
    Hope you will be filtering the data with respect to one field.Check for, whether the
    data elements of the fields, the field you are using in your BAPI Wrapper and the corresponding back end field from where you are selecting the data for this field,
    have the same length or not.
    For example,
      The field in your BAPI Wrapper you want to do filtering is - FIELD_BAPI
      The field in the back end from where you are selecting data to fill the field - FIELD_BACKEND.
         The above mentioned fields may be different. But the properties of the two data elements should be the same. I mean,
    For
       FIELD_BAPI    -              CHAR 60
       FIELD_BACKEND-          CHAR 70 or... like this..
      Check for this ..
    One more thing,
       Make it sure that, one space is not there with your that character you are giving for filtering...
      Which is the persistence medium you are using ?. file system or DB2E ?.
    Check this note for,
    Note 668807 - Restrictions for DB2e
    Regards
    Kishor Gopinathan

  • Drag and drop from Contacts into Numbers not working - any solutions?

    I'm trying to get my Contacts into a Numbers spreadsheet. According to the Help files, I should be able to select the Contacts and simply drag them into a Numbers sheet (after deleting the default Table).  I've tried this many times over and the drag and drop feature doesn't seem to be working.  I can select the contacts and drag them over, but the little contact card remains red when I drag it into Numbers and never turns green to allow me to drop into Numbers. It's the same whether I'm trying to drag one contact or many contacts at the same time. I've also tried exporting a vcard and then dragging that file from my desktop into Numbers, but that doesn't work either.  I've tried quitting and reopening both applications, as well as restarting my computer.  I'm running OSX 10.8.3 and have installed all new software updates, so I'm just at a loss for what to try next. 
    Does anyone have any solutions for this problem, or an alternative way to get my Contacts into a Numbers file?
    Many thanks in advance!

    When I tried, it put up a dialog asking me if I wanted to allow Numbers access to my Contacts. Is it possible you tried this and dis-allowed it access?
    You might check, anyway. Open Security & Privacy System Prefs, select Privacy tab, and select Contacts from the list of items. Is Numbers listed and is it checked?
    Another way to get the contact information into the clipboard is to create an Automator workflow like this:
    Open Automator and select Workflow from the options presented.
    Drag in the above actions and set the properties as you like. For the Get Contact Information action, you must set the export format to Spreadsheet (tabs).
    For the new Text File action, I had to set the Encoding to Unicode (UTF-8) or it would fail.
    Select all the contacts you want and then click the Run button in Automator. You can then open the text file with Numbers.
    If you envision doing this often, start with an application instead of a Workflow and save it somewhere. Then, you can select your contacts and double-click the Application to export the contacts each time.
    The benefit of this method is that you can select all the fields you want to include (at least more than is provided in Drag and Drop).

  • TS4268 iPod message not working

    Can someone please help me?  My son's iPod touch cannot send messages despite having a valid appleid and valid email address.  I've tried several times to get this working but when I go into messages and tap send and receive, then tap on his email address and tap on resend validation email nothing happens.  No email appears yet when he is logged into his appleid it says his account is verified.  When sending a message it will almost complete then stop and later a message pops up to say it failed. What can I do to fix this? Thanks

    Please read the threads. It's an issue from apple and has nothing to do with your wifi.

  • Lost files - have them on iPod - iPodRip not working

    All of my music, videos, etc are gone from my iTunes Music directory.
    I have tried to use iPodRip to recover my iTunes library and playlist - It spent a lot of time on the over 2,100 items but nothing showed up in iTunes.
    So - any other ideas?
    Situation in a nutshell
    - Have all my library on my iPod
    - Need to get it to my MAC
    - Would like to preserve playlists etc.
    Dwaine

    I bought PodWorks - It was unable to transfer the songs...
    I just tried iPodRip - just the songs to the hard drive - nope - didn't work...
    ANY option outside of these two programs?
    Dwaine

  • I can connect my macbook pro to my tv with a VGA cable no problem. When I try to connect it to my tv with and HDMI it does not work, any solutions? It flickers once when first connect it, looking like it recognizes it, then it doesn't.

    I am having trouble getting my macbook to connect to my tv. When I connect my mac to the tv via VGA I have no problem. It detects it right away. I just purchased a HDMI cable because I didn't want to have to use speakers when connect to my TV and it will not detect the computer. The HDMI is a good cable because it connects our apple tv to the tv, so I know it works.
    When I connect the HDMI cable to the tv and my computer, the screen on my tv flickers once and it seems like it is connected. It then flickers one more time about 5 seconds after like it disconnects.
    When I use my VGA it gives me an arrangement tab in the displays, I do not get that when I plug my HDMI in. I get nothing. Is there something else I could do?

    Never mind, I solved it.  Didn't know the converter needed a power source to operate (duh!)  Now I have that, it works just fine.......

  • My camera is not working. any solution, My camera is not working. any solution

    My Back camera stopped working sudenly. My front cam is working but gets hanged up after taking few shots. Plz advice.

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • Please Help. Ipod Screen Not Working

    My screen on my ipod does not work any more.
    I have tried restoring/updating it.....everything!!
    problem is this is my second due to a faulty battery on the first which apple exchanged free of charge for me so I ma not sure if I am entitled to another ipod or what!!!
    If anyone knows how to get the screen working or about 2nd exchanges then please help,
    Thanks,
    Louise x

    If you truly have tried resetting/restoring, then it's time for service. Is it still under warranty, because if so, it won't matter that you have had one exchange already?

  • My daughters ipod 4th gen will no longer charge past 20% and will not connect to a pc in order to back everything up. the cable is working fine, otherwise it would not even charge to the 20%. i have tried the reset to not lose any data and no luck. help!

    my daughters ipod 4th gen will no longer charge past 20% and will not connect to a pc in order to back everything up. the cable is working fine, otherwise it would not even charge to the 20%. i have tried the reset to not lose any data and no luck, home+power for 10-15 seconds. I really would like to not lose everything she has, again, because I can't back it up this time. I have tried charging via a wall outlet and PC and both charge fine, just only to 20%. I am using the cable that came with it so no aftermarket issues there. Please help so I don't have to reset everything again.

    Because once it has charged enough to be powered on as soon as you turn it on it says battery is at 20% and will not charge anymore after that, it just runs for about 5-10 minutes before the battery dies again. The battery cycles discharge/recharge daily and its not on the charger at full charge for more than a couple hours and is never totally dead for more than a couple of hours.

  • I am having trouble looking at video podcasts on my ipod touch. they are all greyed out. I have tried removing them and resyncing. this did not work. any ides?

    I am having trouble looking at video podcasts on my ipod touch. they are all greyed out. I have tried removing them and resyncing. this did not work. any ideas?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all media and resync
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.

  • I have an old ipod. It worked great until about 2 months ago and now it says I need to restore my ipod but I can't unless I format it, but everytime I try, it says the format could not be completed. Is there anything else I can do to get it to work again?

    I have an old ipod. It worked great until about 2 months ago and now it says I need to restore my ipod but I can't unless I format it, but everytime I try, it says the format could not be completed. Is there anything else I can do to get it to work again?

    No app is required.                                               
    - If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
    - You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
    - If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
    - Change the passwords for all accounts used on the iPod and report to police
    - There is no way to prevent someone from restoring the iPod (it erases it) using it.
    - Apple will do nothing without a court order                         
    Reporting a lost or stolen Apple product                                        
      - iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

  • I have an iphone 4s and i keep getting an error message when ever i try to activate i have already restored the phone and it still will not work. any help would be greatly appreciated

    I have an iphone 4s and i keep getting an error message when ever i try to activate i have already restored the phone and it still will not work. any help would be greatly appreciated

    Activation issues are almost always the result of a device that has been hacked or jailbroken.  If that is the case, no support can be provided here.

  • I tried to upload my daughters videos she made on her iPod to my mac iPhoto and it seemed to have "Stuck" and now will not work at all.  It had to a complete fix of the existing library.

    I tried to upload my daughters videos she made on her iPod to my mac iPhoto and it seemed to have "Stuck" and now will not work at all.  It had to a complete fix of the existing library.  It will now not let me move pictures from the "Stream" to "photos", it looks like it is trying to but gets stuck and I have to force a shut down of the programe.
    Thanks!

    -> Tap ALT key or press F10 to show the Menu Bar
    -> go to Help Menu -> select "Restart with Add-ons Disabled"
    Firefox will close then it will open up with just basic Firefox. Now do this:
    -> Update ALL your Firefox Plug-ins https://www.mozilla.com/en-US/plugincheck/
    -> go to View Menu -> Toolbars -> unselect All Unwanted toolbars
    -> go Tools Menu -> Clear Recent History -> '''Time range to clear: select EVERYTHING''' -> click Details (small arrow) button -> place Checkmarks on '''Cookies, Cache''' -> click "Clear Now"
    -> go to Tools Menu -> Options -> Content -> place Checkmarks on:
    1) Block Pop-up windows 2) Load images automatically 3) Enable JavaScript
    -> go to Tools Menu -> Options -> Privacy -> History section -> '''Firefox will: select "Use Custom Settings for History"''' -> REMOVE Checkmark from '''"Permanent Private Browsing mode"''' -> place CHECKMARKS on:
    1) Remember my Browsing History 2) Remember Download History 3) Remember Search History 4) Accept Cookies from sites -> select "Exceptions..." button -> Click "Remove All Sites" at the bottom of "Exception - Cookies" window
    4a) Accept Third-party Cookies -> under "Keep Until" select "They Expire"
    -> REMOVE CHECKMARK from CLEAR HISTORY WHEN FIREFOX CLOSES
    -> When using the Location Bar, suggest: select "History and Bookmarks"
    -> go to Tools Menu -> Options -> Security -> place Checkmarks on:
    1) Warn me when sites try to install add-ons 2) Block reported attack sites 3) Block reported web forgeries 4) Remember Passwords for sites
    -> Click OK on Options window
    -> click the Favicon (small drop down menu icon) on Firefox SearchBar (its position is on the Right side of the Address Bar) -> click "Manage Search Engines" -> select all Unwanted Search Engines and click Remove -> click OK
    -> go to Tools Menu -> Add-ons -> Extensions section -> REMOVE All Unwanted/Suspicious Extensions (Add-ons) -> Restart Firefox
    You can enable your Known & Trustworthy Add-ons later. Check and tell if its working.

Maybe you are looking for