I have a 3rd Generation Itouch, if I get the new update, do I get the Siri Voice Command?
When I went to the apple store today the Itouch's had the new update with the I phone 4S, and had the voice commands. I have the mic earbuds so if I get the new update will it come with voice commands?
No. Siri does not work on an iPod touch; only an iPhone 4S.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
In Memory of Steve Jobs
Similar Messages
-
I have a 3rd generation iTouch with IOS 5.1 (won't update any higher) and a new iPad LTE with a definitely higher IOS. I didn't plug the new one yet because I want to know...can I keep my apps, email, photos on both devices? And also can I update my apps on the iPad without causing problems (some apps won't update on my iTouch because the IOS is not 6.0). Thank you.
Do this:
iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device -
I have a 3rd generation ipod but no play the music
Hi,
I have a 3rd generation ipod.
Load and save the songs perfectly without problems but when I disconnect itunes not playing songs.
I have reset through itunes several times but still the same.
I need help please.
Thanks and regardsHello Gongonri,
Thanks for using Apple Support Communities.
To troubleshoot your iPod shuffle please follow the steps in the support link below.
iPod shuffle (3rd generation) Troubleshooting Assistant
https://www.apple.com/support/ipod/five_rs/shuffle3gen/
Take care,
Alex H. -
i updated the newest version of itunes on our 3rd gen itouch, now we get the message itunes couldnot connect to this ipod because an unknown error occurred (0XE8000001) - what do we do?
Try this:
iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting -
3rd Generation iTouch (64GB) or new nano
I have a 3rd generation iTouch (64GB). Is it worth upgrading to the new nano? I know it doesn't have the space (I currently use 27GB for music), but my battery only lasts 3 days, even if NEVER being used.
ThanksYou want to "upgrade" from an iPod touch to an iPod nano? The iPod touch is a computing device that runs iOS and third-party apps. The nano (even the newest one) is mostly only a media player. It does not run iOS.
Lithium-based batteries wear out over time and use. You can get it replaced by Apple or a repair shop. Here's info about Apple's service
http://www.apple.com/batteries/replacements.html -
Can I use a usb data cable from a classic ipod with my 3rd generation iTouch?
I can't find the usb data cable for my 3rd generation iTouch but I have an old cable from my old ipod classic. It appears to be similar but is it electrically identical for syncing and charging or not?
If it looks the same it should be OK. Some older iPods used Firewire so it the cable has an extra connector (more that the dock connector at one end and a USB connector on the other end) do not use it.
-
I have a 3rd generation ipod nano. I recently upgraded to Lion which is causing lots of issues. Aside from that, I went to the Itunes store to purchase books like I have done at least 100 times before with no problems. Now I can by the book and get it to my computer, however when I tried to download the book to my 3rd generation ipod the dialog box informed me that to download any new audiobook purchases I would need an ipod touch. My ipod nano 3rd generation serves my purposes just fine. Why should I be forced to buy something I do not want just to continue something I have always done seamlessly? I know this is more of a rant than a question but I am sure someone else out there has had this happen to them. Maybe you could share your thoughts on how to work around this issue if possible?
I forgot to add the last obvious and crucial step I had taken - plugging a different iPod into my system. It was also not recognized. That was the final proof I needed to determine if the problem was device or system. But now what?
I truly appreciate any help I can get!
Thanks again... -
I have three AppleTV's where I work. I have two at home. I have an iPhone 4S running iOS7.0.2 which mirrors smoothly via AirPlay. I have a 2011 MacBook Pro and a 2011 iMac, both running Mountain Lion, both of which mirror smoothly through AirPlay. I have a 3rd generation iPad running iOS7.0.2, and since updating to iOS7, it will not mirror. The iPad will connect to the AppleTV, but the TV's and projectors only show a black screen when connected: the iPad screen looks as it should, except that the transitions become jumpy when connected via AirPlay. This is true on both networks: at home and at work. Another gentleman using the network where I work has the most recent iPad, also running iOS7.0.2, and he is having the same problem. I have tried to "Reset All Settings." I have tried to "Restore." Does anyone have any suggestions? Has anyone else experience difficulty mirroring the iPad through AirPlay since the release of iOS7.0.2?
No problems exists with the router (on either network described above) or the multiple AppleTV's which are able to mirror multiple other OSX & iOS devices seamlessly. The problem is strictly with the iPad and iOS7.
The following information was helpful:
Big Apple fan
Re: AirPlay with AirServer connectivity problem
Oct 14, 2013 9:43 AM (in response to ceb2652)
This is an iOS 7 AirPlay mirroring bug...
To make matters worse, the iPad automatically drops its mirroring session 45 seconds after it auto-locks.
3-4 mirroring sessions is all it takes for the iPad mirroring to freeze up.
After this happens, mirroring to an Apple TV only projects a blank screen.
Once the mirroring is hung, the only way to fix it is to restart the iPad.
Apple please fix this iOS 7 issue! -
I have a 3rd generation iPod Touch and just did the update to IOS 5. Now I can't connect to my Netgear wifi router. My iPhone connects fine along with all of my other laptops etc. I have the router set with WPA-PSK [TKIP] security and an access list. I've confirmed the mac address is included on that list and that the password is correct. Under choses netwrok I select the network and it just goes into a spin. I have tried removing the password and the access list settings and it still will not complete the connection to the router thus no internet access. The routers firmware is also up to date. This thing worked fine before this update and I've already tried to restore from backup. Any ideas or is the wifi nic bad in this thing with the new apple firmware update? Any fix?
Thanks Bob, I don't know why but it all of a sudden worked a few days later. It's a mystery but at least problem solved.
-
I have a 3rd generation nano ipod and after connecting it to my mac to sync my calendar, it said it no longer would sync the calendar. What's up with that???
Thanks Bob, I don't know why but it all of a sudden worked a few days later. It's a mystery but at least problem solved.
-
I have a 3rd Generation iPod that will NOT connect to our internet connection at home. Message on screen keeps saying it is 'unable' to connect. Yes I have already reset to default factory settings, No we do not have our service encrypted or password protected, anyone else have any other viable suggestions as to how to fix this problem?
Does the iPod connect to other networks?
Does the iPod see the network?
Any error messages?
Do other devices now connect?
Did the iPod connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
I am not computer savvy. I have a second generation itouch and have never had any problems with it until now. When I try to play certain songs, it will not play the song and skip to the next song selection. When I try to play certain videos, the message "This movie could not be played" appears. I contacted a tech spec who said it was possibly a format problem. How do i fix this?
This might sound weird, but here's an idea which worked for me re music that was newly added to itunes and showed up in my ipod but wouldn't play - I simply played the tracks in itunes first, just a second of time or so will do it, not the whole track, then connect the ipod and sync again and this time they played - hope this helps.
-
I have a 3rd Generation Ipod with no voice mic, I want to buy a mic headset to use so that i can use the voxer app, do i need a certain kind of headset brand?
I did not screen shot it but another window appears that says my device cannot be found. Is this ipod relic a goner?
-
I have a 3rd generation shuffle. It has stopped working with the earphones it came w/pinch buttons on the cord. It will no longer advance to next song/change the volume. Even with a new set of Apple earbuds, it does same thing. How do i factory reset or fix the problem?
Hello there, RufusChloe.
The following iPod Troubleshooting Assistant should help with troubleshooting your issue:
Apple - Support - iPod - iPod shuffle (3rd generation) Troubleshooting
http://www.apple.com/support/ipod/five_rs/shuffle3gen/
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
I have a first generation ITouch and want to only store music on it. How do I delete the built-in apps such as Stocks, Mail, Photos, Videos, Calendars, Maps, etc. to free up space? Thanks.
You can't.
Maybe you are looking for
-
Handler called in library can only used passed variables?
I have been redoing a 3000-line program to put handlers in an assortment of libraries. I've been getting a lot of variable undefined errors after calls to the handlers in the library. Previously, I declared global variables and the handlers, when the
-
Can one apple base be connected to another apple base station with ethernet?
Can one apple base be connected to another apple base station with ethernet?
-
When I click on check updates I don't get a message just the thinking icon and then nothing
I have version 1.0.1 and I want to upgrade. The reason I haven't done it yet is because I recently bought the phone second hand. But I am unable to update it and what happens is the circular icon indicating that something is happening shows up, then
-
ECC table for material date information ?
Is there any table in ECC where i can find out the last sale date of Material and Last recieve date of material ? I was trying to find out the dates from mseg table ..but couldn't get is so far . could you please help me .
-
I had a beautiful application working, decided to rename a few of the database fields and change the data types to decimals to enhance the app and now I cannot get a record to update on my existing update page. I have deleted the recordset and readde