I have a 4101 mfp with no display on the control panel?

I have a HP 4101 mfp printer C9149A with no display or LED lights on the control panel, I have replaced the control panel, formatter and the PCB connector. Any suggestions.

This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial Laserjet board here:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Similar Messages

I have a new ipad with retina display and the orientation change from portrait to landscape is extremely slow? How can I improve the speed?

Any ideas on how to improve the speed ?

Hi rodtheprod,
I apologize, I'm a bit unclear on the issue you are describing. If a movie from the iTunes Store supports multiple languages, they can usually be changed as outlined in the following article:
iTunes: Language settings for video
http://support.apple.com/kb/HT5562
If this is not possible and no changes have been made to the country settings for the iTunes Store, you may want to try redownloading the movie (if it is still available):
Download past purchases
http://support.apple.com/kb/HT2519
Regards,
- Brenden

I have updated my Iphone5 with new IOS6 - now the screen/display does not react to my taps on screen as in i cant tap in my pin to start???

I have updated my Iphone5 with new IOS6 - now the screen/display does not react to my taps on screen as in i cant tap in my pin to startup???

I have updated my Iphone5 with new IOS6 - now the screen/display does not react to my taps on screen as in i cant tap in my pin to startup???

Hi I have only 2 days in USA to buy Mac Book Pro 13" with Retina display. The issue here is that I'd like to get the westerns spanish keyboard and at the apple store the guy said it will take 6 days. I was wondering if I do the purchase NY on the 7th of M

Hi I have only 2 days in USA to buy Mac Book Pro 13" with Retina display. The issue here is that I'd like to get the westerns spanish keyboard and at the apple store the guy said it will take 6 days. I was wondering if I do the purchase within the express checkout, Will I be able to get the laptop before leaving NY on the 7th of May 2014?
I do not have any experience with the express checkout, actually I do know how it works, any advice please?
Thanks!!!!

Call the store on the telephne and ask. However, I doubt it since a store would not normally have an item with non-USA features
Also, this is the Mac Pro desktop forum. I requested your post be moved to the MacBook Pro laptop forum

I have a macbook pro with retina display and when I try to purchase a digital hd movie I am told mp pc ic incapable of watching hd but sd I can purchase?

I have a macbook pro with retina display and when I try to purchase a digital hd movie I am told mp pc ic incapable of watching hd but sd I can purchase?

1. System Preferences > Other/ Flash Player > Advanced > Delete All
     Press the "Delete All" button
     Install Adobe Flash Player.
    http://get.adobe.com/flashplayer/
    Follow the prompts.
    Quit Safari.
    Restart computer. Relaunch Safari.
2. Allow Plug-ins
    Safari > Preferences > Security
    Internet Plug-ins > "Allow plug-ins"
    Enable it.
    Press " Manage Website Settings" button for more options.

I have bought macbook pro with Retina display on 7th January. But its price is reduced and its cpu is upgraded to 2.6Ghz. Can I return it and get my money back?

I have bought macbook pro with Retina display on 7th January. But its price was reduced and its cpu was upgraded to 2.6Ghz in February. Can I return it and get my money back?

You have 14 calendar days to return an item from the date you received it.
http://store.apple.com/us/help/returns_refund#policy

I have the iPad with retina display and the screen is cracked, however it is not yet a year old, how much does it cost to replace it

I have the iPad with retina display and the screen is cracked, however it is not yet a year old, how much does it cost to replace it?

I don't know what country that you are in, but in the US the price for repair (i.e. replacement) is (from here) $299 for the iPad 3, and here in the UK (from here) £256.44

Does anyone have problems with Mail (Display on the right) ?

Hi to everybody !
Does anyone have problems with Mail (Display on the right) ?
What could be the cause of not displaying HTML correctly ?
Could it be because I use SIMBL, that allows me
to have Colourful SideBar ?
Best regards
Vialatte

Try This...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

Want to change my16giga byte ipad mini with retina display to the 32giga one because i think its capacity is insufficient. So could i change to 32giga by giving an extra charge. I bought 16giga ipad mini on thanksgivingday, maybe 30. November

I want to change my16giga byte ipad mini with retina display to the 32giga one because i think its capacity is insufficient. So could i change to 32giga by giving an extra charge. I bought 16giga ipad mini on thanksgivingday, maybe 30. November

If bought directly from an Apple Retail store or Apple Online store, and is still within the 14 day return period Apple Offers you can take it back and get a full refund which you can then use towards buying the other version.
If its already past the 14 day period then you won't be able to return it for a refund no.
If you did not buy it from an Apple Retail store or Apple Online Store you will have to consult with the store you bought it from about their return policies.

What are the differences between the Apple 64GB iPad Air with Retina Display and the Apple 64 iPad with Retina Display MD512LL/A 4th Generation

what are the differences between the Apple 64GB iPad Air with Retina Display and the Apple 64 iPad with Retina Display MD512LL/A 4th Generation ?

The iPad with retina display only comes in the 16GB version and it has the A6 processor which is a step down from the Air model. Having said that, I stream movies on my iPad 3 with retina and it has the A5 processor and the movies stream just fine as does everything else that I do on the internet.
If 16GB is enough storage for you, the $100 savings compared to an iPad Air model is a fair amount of money and that might sway me if I was just worried about saving some money. However, that's not my style. I always go for the largest capacity that I can afford and the faster processor if I have the choice.
Having said that, if it were me, I would select the 32 GB iPad Air. But in spite of the information that you provided in which you want to base your decision, only you can be the judge of what will be best for you, and remember that you cannot add storage capacity to the decide later. You can purchase external WiFi drives if you need the storage, but to me, that takes away from having the really small footprint and portability of only having to carry the iPad around gives you.

Every time I update or repair in the control panel it comes up with a error message like, this file does not have a program associated with it for performing this action, please install a program if it is installed create an association to the default pro

EVERYTIME I UPDATE SOFTWARE OR GO INTO THE CONTROL PANEL TO ITUNES TO REPAIR OR CHANGE IT GIVES ME AN ERROR MESSAGE
THIS FILE DOES NOT HAVE A PROGRAM ASSOCIATED WITH IT FOR PERFORMING THIS ACTION. PLEASE INSTALL A PROGRAM, IF IT IS INSTALLED CREATE AN ASSOCIATION TO THE DEFAULT PROGRAMS CONTROL PANEL

STOP SHOUTING! Or at the very least, get the CAPS lock key fixed.
Remove iTunes.
Download and install the current version of iTunes from http://www.apple.com/itunes/download

I have created a PDF with mp3 audio clips, the file works on PC's with audio playback (WIndows 7, 8 ) however the audio does not play when hosted on a website or an ipad/tablet computer or smart phone when used with PDF reader

I have created a PDF with mp3 audio clips, the file works on PC's with audio playback (WIndows 7, 8 ) however the audio does not play when hosted on a website or an ipad/tablet computer or smart phone when used with PDF reader

adobe42135678 wrote:
the audio does not play when hosted on a website...
When viewing in what browser?

IPhoto was working fine. Performed update for HP printer, which should have nothing to do with iPhoto. But the next time I tried to open iPhoto, got this message. "To open your library with this version of iPhote, it first needs to be prepared." When I g

iPhoto was working fine. Performed update for HP printer, which should have nothing to do with iPhoto. But the next time I tried to open iPhoto, got this message. "To open your library with this version of iPhote, it first needs to be prepared." When I g

What version of iPhoto? Assuming 09 or later...
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

I have released one PO with tcode ME28 but the PO is still be blocked

I have released my PO with tcode ME28, and the PO is in released status in header data of the PO.
But when I go to MIGO to post a GR, I still get the information that the PO not yet released.
Can anyone tell why and how I can proceed?
Thanks,
Eda

Hi ,
Please check the status of release in ME23N , it might be possible that you would be having more than 1 release to be made .
Check in ME23N how may release status are there and see to it that all the release codes are relesed .
Regards ,
Dewang T.

Hi, I have a Catalyst 6500 with X6K-SUP2-2ge, the IOS and bootlader image been wiped out, it starts in ROMmon SP mod end can't switch to RP to start download the IOS using Xmodem, though it shouldn't work in ROMmon SP omde but the xmodem is not gving the

Hi, I have a Catalyst 6500 with X6K-SUP2-2ge, the IOS and bootlader image been wiped out, it starts in ROMmon SP modw and I can't switch to RP to start download the IOS using Xmodem, though Xmodem shouldn't work in ROMmon SP mode but the it's not gving the
not executable message, the slot0: and disk0: are not accessable can't see the files inside, when I try the dir slot0: or dir disk0: it says it can't be opened and when I try to boot from them there's noting as well, what can I do to load an IOS image to the booflash: or slot0: ,each time I load the image using Xmodem at the end it gives me *** System received a Software forced crash ***
signal=0x17, code=0x5, context=0x0
When I run the command:
rommom1> boot bootflash:
boot: cannot determine first file name on deice "bootflash:"
rommon2> boot slot0:
boot: cannot open "slot0:"
boot: cannot dtermine first file name on device "slot0:"
BTW System Bootstrap, version 7.1
I''m looking to format the PCMCIA using a PC and format it to FAT16 and copy the boot image into it and then try to load from the PCMCIA afterward if it works I'll format it using the Supervisor engine 2.
Any one have another new idea I can use, thanks in advance

This is a potentially complex issue.
Is this SUP configured to run as IOS native or CatOS Hybrid?
While in ROMMON can you do the 'dev' command and see whad drives are recognized. Then 'dir' the drives that the SUP recognizes.
Can you provide the screen captures as it boots?
You would be bette served by hacing a TAC case.

I have a 4101 mfp with no display on the control panel?

Similar Messages

Maybe you are looking for