I have a 4S phone, screen remains black, charging doesn't help. Is this a battery issue?

I have a 4s i-phone, the screen remains black. Charging doesn't help, could this be a battery problem?

Hi there Z17b491,
You may find the troubleshooting steps in the article below helpful.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
-Griff W. 

Similar Messages

  • Hello!!! I have my I phone screen all black and I cannot see nothing!! do you know or do you have an idea about what's happened?

    hello!!! I have my I phone screen all black and I cannot see nothing!! do you know or do you have an idea about what's happened?

    Connect your phone to the wall socket and press and hold display off and on button along with home button for over 10 seconds till Apple logo appears.

  • Satellite A300 - Not turning on, screen remains black

    I have a Satellite A300 laptop. I tried turning it on when I got home from work and the monitor remained blank. The lights come on the bottom (the plug, the power and the battery lights) but the screen remains black.
    Can someone help me?

    Hi
    Its difficult to say whats going wrong here but maybe its just a small issue which could be solved easily.
    Try this;
    Remove the battery, disconnect the AC adaptor.
    Then wait some hours and plug the both parts again.
    I had such issue in the past and leave the notebook disconnected during the night.
    Next morning I plugged battery and A\c adaptor and the notebook worked again
    Maybe this will help you too

  • My iphone died and when I plugged it back in to charge it when it powered on the screen remained black.  I can hear when I receive a text and a hear siri.  I have tried holding down the sleep and home button

    My iphone died & I plugged it back in to charge when it powered on the screen remained black.  I can hear when I receive a text and siri.  I have tried holding down the sleep and home button and restoring in itunes neither worked.  The screen on the phone is cracked but has been working fine until now.  Please help!!!

    Here's how to perform the restore:
    HT1414
    If you can actually get to restore, maybe (I estimate a 0.01% chance) you'll be able to do a backup before the restore.  Actually, from the symptoms you describe, I suspect a restore won't work either and you'll need to do a recovery.
    Just in case, if you need to recover (restore fails), here's how.  Note you may have to try to get into recovery mode more than once.
    http://support.apple.com/kb/HT1808

  • My iPod touch won't turn on. I have tried plugging it in to charge, but and the screen remains black. I have tried restarting/resetting it to no avail. I would really appreciate your help. Thank you.

    My iPod touch won't turn on. I have tried plugging it in to charge, but and the screen remains black. I have tried restarting/resetting it to no avail. I would really appreciate your help. Thank you.

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • Laptop screen remains black (off) when I turn on the computer

    Hello,
    Today I came home and turned on my laptop as usual except this time the screen remained black. I can hear the fan running and then the usual windows chime at start up, but nothing to view. The HP logo at the back still lights up though. Just the actual screen remains completely black like it is off. I tried connecting it to my tv via HDMI and to an external monitor but there's no signal. I also tried doing a hard reset which I read about here but that did nothing.  I feel as though it's just the monitor won't turn on but everything else might be fine.

    Hello @brianh123,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I have read your post on how your notebook's screen remains black when your power on your computer, and I would be happy to assist you!
    Since the image will not appear on either the notebook or the external monitor, I believe there is a startup issue with your computer. To enable your notebook to power on correctly, I recommend following the steps in this document on Troubleshooting Black Screen Displays with No Error Messages During Startup or Boot.
    If the issue continues, I recommend contacting our technical support at 800-474-6836 for hardware replacement options. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    I hope this helps!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • My i phone screen is black and an apple on it. I'm trying to connect it to computer to i tunes and it's not registering under devices. Any ideas?

    My i phone screen is black and has an apple on it.  I tried connecting it to my computer but it is not recognizing it under devices.  Any Ideas?

    You may have done this, but I'd try the home button/power button shutdown first....it sounds like it is hung up in the "boot" process somehow...if that doesn't work as paulcb said, recovery mode may be the only option..I suppose you could also try and let the battery fully discharge...

  • HT201412 My ipad screen remains black and show a persistent apple logo.

    My ipad screen remains black and show a persistent apple logo. Sometimes it turn on and off automatically every 5minutes. I have already restored iOS software for 3 or 4 times. I have also seen with the apple genius supporter. The problem still remain the same. Does anybody have any suggestion beyond that? I dont know how many people are experiencing the same problems. Why dont apple solve this issue seriously? My rating to apple would become dramatically decreased to zero. I have decided not to buy apple product anymore.

    We are not Apple here .. you should bring your concerns to their attention.
    http://support.apple.com/kb/HT4623

  • IMac 24 inch screen remains black

    Hi,
    iMac starts up in normal way but screen remains black. When I do Screen Sharing from my MacBook Pro I see there's nothing wrong with the iMac ... on my MacBook Pro the normal screen from my iMac is shown.
    Please some help?
    Many thanks,
    Johan

    Hi guys,
    got the same problem. I've even talked to apple's 2nd level support about it.
    made pictures for them and so on. Now the important questions!!!
    Are you guys smokers ? I bet you are
    Apple's 2nd level support told me that this is caused by smoking infront of the imac.
    And their solution to this problem (at least here in germany) is to get it cleaned and tell you to stop smoking in front of it !!!!!!!!!!!!!!!!!!!!!!!!!
    Because there are not enough complains about this problem from customers !!
    I'm soooo **** !
    Please everyone let apple know (call them) that this is a big big problem and they should redesign the iMac's (if it is a design flaw).Or give everyone that has this problem a new one, that doesn't have this problem.
    Smokers unit !
    See pictures in this thread: http://discussions.apple.com/thread.jspa?messageID=6036577#6036577

  • MacBook Pro 2008 not turning on, no sign of power and screen remains black

    I have a MacBook Pro 2008.
    It was working fine until when one morning i wanted to turn it on as usual only to find out that it can not power on.
    When i press the power-on button, i can hear the hard disk spinning but no display, the screen remains black like not getting power.
    No beep sound when tried to boot without RAM installed.
    The battery and the Charger worked fine when tested with another computer.
    The RAM works fine when tested with another Computer too.
    What could be wrong with my computer, i hope it is not the board that is dead.
    How can i overcome this problem?

    Op Charles,
    You can try a SMC reset:
    http://support.apple.com/kb/HT3964
    Follow directions for a battery that applies to your machine.
    http://support.apple.com/kb/TS1365
    http://support.apple.com/kb/TS1367
    You can check these as well
    It sounds as thogh the the GPU may be dead, you can take it in to an Apple Genius (make an appointment) they will disgnose it for free and give you your options.
    Good Luck

  • My iphone doesn't ring when it's unlocked .. i have calls but the screen still black and when i slide to unlock the screen i found i had missed calls

    My iphone doesn't ring when it's unlocked .. i have calls but the screen still black and when i slide to unlock the screen i found i had missed calls
    i have tried manythings but it doesn't work
    i put it in silent mode and i found my calls comes normaly and it works good but when i turn on ring mode it's back as it how can i fix that ?!

    Basic troubleshooting steps outlined in the user guide are restart, reset, restore from backup, restore as new device.  Try each of these steps until your problem is solved. If these steps fail to solve your issue, then you'll need to bring your phone into Apple (or an authorized service provider in your area) for evaluation.

  • My iphone 4 fell in the toilet 4 days ago and it's been drying in rice since.  now when i plug it in, the screen remains black  but it will vibrate.  is this a good sign or is all hope lost for getting it to work again?

    My iphone 4 fell in the toilet 4 days ago and has been drying in rice ever since.  I tried plugging it in today and the screen remained black but it did vibrate when i switched it to vibrate.  Is that a good sign?  Or should I just give up hope already?

    well good sign or good sign maybe a strong word
    it mean that not all of the device have been damaged by the fluid
    but it does not really mean that the screen will ever work again
    when drying in rice make sure you don't
    1 conceal it so the vapor can't escape or it will not dry enough
    2 make sure to leave in on a heating source like a heated floor or radiator to speed up the proccess of the vaporising

  • My iphone screen is not turning on.when i put it on charging it sounds like it is charging but screen remains black.nothing is happening just i listen sound..plzz help

    My iphone screen is not turning on.when i put it on charging it sounds like it is charging but screen remains black.nothing is happening just i listen sound..plzz help...i m using iphone 2g 3.1.3

    Did you already try to reset the phone by holding the sleep and home button until the Apple logo comes back again?
    If this does not help, try to connect in recovery mode, described here: iOS: Unable to restore

  • New ipod nano 6th generation used 3 times. Screen remains black despite a full reset. Something special to do ?

    Hi, I just bought a new ipod nano and used it 3 times. Today it did not work and I first believed that the battery was too low. I connected the device to the mac. Sync worked well and charge indicator as well. Nevertheless, the screen remained black. I therefore tried to reset the device and after the resetting, the screen remains as black as before. Any solution ? thanks and regards

    If it does not get enough juice from the USB port, it will not charge.
    You should NOT connect it to a USB hub. Connect it directly to the computer. If you use a desktop computer, use one of the ports on the back, not one on the front, which tend to be lower power.
    You say you are using a macbook, which tend to be better about power. Make sure you don't have any settings that turn off power to the usb ports when the computer goes to sleep. Check your power settings in the settings screen.
    i

  • Screen remaining black at startup

    When starting up my Satellite S55 I can hear the drive running, but sometimes screen remains black. Sometimes it will not shut down if I press the on/off switch or close the lid. Just keeps running with a black screen. I usually leave my laptop plugged in. This computer was purchased in Jan of 2014 and has not been used a lot. Why does this happen frequently?

    DanielTZ wrote:
    I don't even know where my original installation disks are now
    AppleCare will send a replacement set for a nominal fee.
    Or buy a retail disk ($29 U.S.)
    I have the installation disk from my MBP mid-2010.
    The gray discs are specific to the model and build period of the Mac they came with;  they won't work on another Mac. 
    Apple changed the firewire plug from the one machine to the other
    You can get a small adapter, or a cable with different plugs at each end.  Just so you know what the adapter looks like:  http://www.amazon.com/CABLES-FIREWIRE-6-PIN-FEMALE-4-PIN/dp/B000ENY90A

Maybe you are looking for

  • '12 Mini to Older Receiver via Optical - Can't get 5.1 Surround

    Yet another "Can't get surround sound via Toslink" question... System: 2012 Mac Mini Video to Sharp HDTV via HDMI Audio to Pioneer VX-D608 Receiver via Optical I have the cables connected properly. Video is flawless. Audio is being transmitted to the

  • Passing data from one component to another

    I have one composite component (HtmlGroupPanel) that holds one or many primitive component. I have to sum up all the number of X in each primitive component and pass it to the parent/composite component to render that data to the user. Can any one pl

  • Have a problem with bb browser

    Since 2 days I was using my twitter from bb browser very well but today I installed ubertwitter and used my twitter through it then when I uninstalled it I can't access my twitter from bb browser every time i type my user name and password it says wr

  • Add new column (Blocked stock) to ADSUBCON

    Hello , Does anyone has experience with adding a column to ADSUBCON display? My client wants to add Blocked stock info. Amnon

  • I need what kind of J2EE technologies should use to design apporval system

    Hi, I have to design and develop a java based approval system. Which are the best J2EE frameworks we can use for UI layer, Service Layer and Data Access layer to develop a approval system. Can somebody suggest me, Right now i have some frameworks in