I have a 4th gen iPod touch that won't power up! I tried all the traditional stuff. I want to know how to tell if the battery is good. itunes see's the ipod in recovery mode. Tried dfu mode and did not work. Any ideas?
I have a 4th gen iPod touch that won't power up! I tried all the traditional stuff. I want to know how to tell if the battery is good. itunes see's the ipod in recovery mode. Tried dfu mode and did not work. Any ideas? I can hear the PC beep when plugging it in! I suspect a bad battery and trying to charge it ina wall charger made it hot!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. The appointment is free.
Apple Retail Store - Genius Bar
Similar Messages
-
I am having trouble looking at video podcasts on my ipod touch. they are all greyed out. I have tried removing them and resyncing. this did not work. any ideas?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all media and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
my mac book pro 17 inch , 2008 year , display went dark after rebooting from origianl disc, and the steps in "everthing Mac" book did not work, any ideas?
The router might be bad or incompatible, but let's be optimistic.
On System Preferences, go to Network/Advanced/PPP. Only two items should be checked: Connect Automatically When Needed and Disconnect when switching user accounts. Uncheck everything else. Now, click Okay on the end of the page. The next time you're online, you shouldn't be disconnected.
If you still get disconnected like before, we might be dealing with a router issue - which can get rather complicated. -
Download it many times still not working...
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select "/var/log/install.log" from the file list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting. -
My ipod screen does not light, you can see the icons, connects to itunes but it does not even light up the brightness of the screen. I made him the restoration of production and did not work.
Please I need to know what do I have to do.
RegardsIf you can't enter the passcode then you have to place the iPod in recovery mode and then restore the iPod via iTunes. For ecovery mode see:
iPhone and iPod touch: Unable to update or restore
Note that this requires using the sleep/wake button. If you are not successful then there is nothing else that I know you can do. -
I am trying to upload pictures from my phone to my computer and I'm getting an error message that a photo is corrupted so it can't download. I don't know how to tell which of the photos is corrupted so that I can delete it and try again? Thanks!
If this is an iCloud account the Outbox only appears when sending an email, so if it is still trying I suppose it should be showing now (not sure though, hard to replicate this)
What type of email account? -
just downloaded ios6 on my ipod touch and lost all color when I select an artist or song how can I get it to be blue again tried resetting did not work any help offered would be liked
You need to restore.
Everything should be on your computer, so you can just sync it back.
iPod touch User Guide (For iOS 4.3 Software) -
My MAC has version 10.4.11 and is a Powerbook G4. My ipod touch has version 4.2.1 and will not connect any ideas?, My MAC has version 10.4.11 and is a Powerbook G4. My ipod touch has version 4.2.1 and will not connect any ideas?
you need to install iTunes 10.
in order to install iTunes 10, you need to upgrade your Mac to OS X 10.5.
see system requirements here: http://support.apple.com/kb/DL1061 -
I have a new ipod and want to know how to tell if it is fully charged?
I have a new ipod shuffle and want to know how to tell when it is fully charged?
The light would eventually stop blinking and would be a stand-still green if your iPod is fully charged.
-
running os 10.9.2 and ever since I loaded it, I am showing that I have a flagged message,which I can't find. Also, now have a 'flagged' message mailbox that I did not add. any ideas how to clear an apparently nonexistent flagge message in Maverick? I've tried all the basics and nothing seems to show
Have you tried resetting the SMC ? > Resetting the System Management Controller (SMC)
-
I'm trying to reset my iPhone 4S but I have no internet as my wifi has broken and I have no data left, I have tried connecting to a computer which did not work any help would be grateful thanks
A reset has nothing to do with Internet access or data access.
A reset is simply pressing and holding the home and power buttons until the white Apple logo appears.
What are you really trying to do? -
My iphone 4s will not connect to networks. the button is greyed out and cannot turn on. I have reset the network settings and it still does not work - any ideas?
Thank you I tried the reset again did not fix- I think I am down to calling Apple and paying for a tech - phone company says it is a software problem. I just updated to 8.1.3 - I thought the update might fix it.
-
So, my Macbook Pro with retina display only prints in black and white. My printer, Officejet 4620 series [555DE4], is not the problem. I want to know how to be able to print in color as well??
In the Print dialog, select the Color Matching tab and then select Vendor Matching.
-
i've had to reset my ipad to factory settings and restore from backup (have also got new softwear) my passcode is now not working - any ideas on the default?
Typos mad = and
Receive = retrieve -
How can I get my money back I BUY the Coins in the game fieldrunners 2 HD were cut $ 9.99 $ from my account and did not receive any coins?! No. process MHFQZV02X8 please cancel the operation, collected coins and thank you
Apple does not have a presence here, this is a user to user forum. You would probably have more success contacting iTunes Support at http://apple.com/support/itunes/contact/.
Maybe you are looking for
-
Question on Swing, MVC and Events (Best Practices)
Hi, I'm making a Swing application trying to follow the MVC pattern. To that end, I have an ApplicationView class and an ApplicationController class (as well as a DataModel). Obviously, I want to have the view as loosely coupled to the controller as
-
X segfaults on start - possibly libpthread/glibc related.
I restarted my laptop this evening and when I ran startx X segfaulted straight away. This is a Thinkpad R500 with a Radeon GPU. I noticed that the log mentions libpthread. That is owned by glibc and I remember that glibc was upgraded on the 20th Feb.
-
How to Create Custom Usage Decisions
Hi, I am working in ECC 6.0. I want to create a Custom Usage decision (Plant Specific). I can not remember where to go to set this up? If I use transaction QS41 and set up my own Code Group under Catalog type 3 (Usage Decision), where can I attach th
-
Photoshop CS4 - odd behavior in titling
All, I edit video almost every night and every weekend and have been doing this for several years now. Suddenly, I'm seeing an odd behavior now that I've never seen before. I created a title that consists only of a red circle and have it as one of
-
Photoshop works perfect on my outdated macbook. I installed it on my new one with 10.8.2. I will be working in it and after about a half hour it just quits. I reopen it and it quits again after about a half hour. It continues to do it until I get so