I have a 4th generation iTouch and the screen will not slide to unlock. I have tried resetting it. Any tips?

My iTouch touch screen will not work. When I go to unlock it, to slide the thing on the bottom of the screen, it doesn't even seem to sense that the screen is being touched. Also, because of this, I cannot turn it off because the screen doesn't know I'm trying to slide the power off slide on the screen. I have tried holding the power button and the button on the bottom to reset it, but it didn't help. Is there anything else I could try?

If it still does it after a restore, you most likely have a bad screen digitizer. Contact Apple and get it repaired.
Basic troubleshooting steps  
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

Similar Messages

  • I just took my new MacBook Pro out of the box and the screen will not work. Display is, black no life to the screen at all

    So I just ordered my first Mac book Pro. I took it out of the box and hit the power button to do the start up and the screen will not work at all. I shut the computer off and back on again. I plugged it in and unplugged it. I've done everything I can think of and the screen still stays blank with no life at all

    Is the battery charged? Press the little button on the left edge, near the front. If no green dots, no charge.
    Does it charge? When you connect the MagSafe charger, does the pilot light on the plug light up?
    Does it actually start? Should sound a chime after you press the power button on the top/right corner. If it chimes, does the Caps Lock pilot light when you press it?
    If it starts and Caps Lock does flash on and off, have you tried pressing the screen brightness control for awhile? F2 turns up the brightness, may be turned fully down.

  • I DONT KNOW WHAT TO DO!!!!!!!!! my ipohone die and i placed it on the charger to charge and my screen will not come up its black. i tried to restore it but my phone will not come on what do i do

    I DONT KNOW WHAT TO DO!!!!!!!!! my ipohone die and i placed it on the charger to charge and my screen will not come up its black. i tried to restore it but my phone will not come on what do i do

    i did the apple sign came on as white and my screen had white around the edges i retored it and afterwards my phone is vibrating nonstop on the USB cored while still pluged to my pc

  • HT4061 the phone will not slide to unlock

    My iphone S4 is locked and will not slide to unlock

    I just had this problem two days ago and the Apple support line suggested that I press power and home button at same time. It took a few tries and the Apple logo showed and everything started working again. The screen now is sensitive to touch and I can unlock it to answer called, etc.
    Thank you Apple
    John47

  • HT4623 I clicked on an e-mail and now my IPad is stuck and the screen will not convert back to my e-mail list. How do I get the screen to go back to my original mail list?

    My mail screen will not convert to the original mail listings. this happened when I clicked on an attachment sent with an e-mail. How can I get the mail screen unstuck?

    Hi donna Ifromwa,
    Thanks for visiting Apple Support Communities.
    If your iPad is unresponsive after clicking on an attachment and you cannot return to your email inbox, I recommend forcing the attachment and Mail app to close using this method:
    Double-click the Home button.
    Swipe left or right until you have located the app you wish to close.
    Swipe the app's preview up to close it.
    These steps come from this article:
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    If you still cannot access your email, restart your iPad next:
    iOS: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    Regards,
    Jeremy

  • HT1174 I have a 32 GB IPOD touch and the screen will not load.

    How do I make the screen appear on my IPOD touch?

    Have you tried the basics from the manual?
    Restart.
    Reset.
    Restore

  • I can access the camera but the screen will not open to allow me to take pictures

    I can acess the camera app on my itouch but the screen will not open to allow me to take pictures.  Has anyone had this problem?

    Yes others have.  If the following (in order) does not solve the problem) an appointment at the Genius Bar of an Apple store is in order.
    - Reset iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Restore the iPod from backup via iTunes
    - Restore the iPod to factory defaults/new iPod

  • I have a first generation iPad and the screen went completely green on me and locked up.  I was able to unlock it, but now there's a green haze all over the screen.  Anyone know what the issue could be and how I can get it fixed?

    I have a first generation iPad and the screen went completely green on me and locked up.  I was able to unlock it, but now there's a green haze all over the screen.  Anyone know what the issue could be and how I can get it fixed?

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Out-of-Warranty Service
         If you own an iPad that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will replace (Apple doesn't repair) your iPad with an iPad that is new or equivalent to new in both performance and reliability for the Out-of-Warranty Service fee listed below. (The replacement will most likely be a refurbished iPad in a brown box, however, it has a new screen, back and battery.)   
    iPad model
    Out-of-Warranty Service Fee
    iPad mini
    $219
    iPad 3rd, 4th generation
    $299
    iPad 2, iPad
    $249
    A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in US dollars and are subject to local tax.
    Certain damage is ineligible for out-of-warranty service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications. However, an iPad that has failed due to contact with liquid may be eligible for out-of-warranty service. See http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipad
    Make a Genius Bar Reservation
    http://www.apple.com/retail/geniusbar/
    You may can get the iPad repaired at 3rd party repair sources for less $, however, any remaining Apple warranty will be voided.
    iPad Repair & Screen Replacement Services
    http://www.ifixyouri.com/16-ipad-repairs
    RepairZoom iPad Repair
    http://www.repairzoom.com/ipad-repair.html
    Mission Repair
    http://www.missionrepair.com/Apple_iPad_Repair_Services_s/431.htm
    iGadgetResQ
    http://www.igadgetresq.com/ipad-repair/
     Cheers, Tom

  • What is the difference between the 4th generation ipad and the ipad 3 with retnia display?

    What is the difference between the 4th generation iPad and the "New iPad with retina display"? i don't quite understand. are they stilll the same size or would i have to get a different case?

    The 3rd and 4th generation iPads are the same size. The 4 has a faster processor, and a little better iSight camera for FaceTime. The 4 also has the lightning connector so your old cable will not work with the iPad 4.
    You should always check with the manufacturer of the case to see if it will fit. You can probably do that on the manufacturers website.
    This might be of some interest to you.
    http://www.zdnet.com/ipad-4-teardown-pretty-much-the-same-as-the-ipad-3-70000068 33/

  • I have a 4th gen ipodtouch and the screen doesnt work to touch only voice???help

    i have a 4th gen ipodtouch and the screen doesnt work to touch only voice???help

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • I have a 3rd generation IPod and the screen has gone completely blank.  It is fully charged and will play music but I have no idea where anything is.

    I have a 3rd generation IPod and the screen is black - it is fully charged and will play music but there is nothing to be seen on the screen.  I have no idea how to fix this.  We live in France now so any of the fixes have to be in English since I can't read French.  Any advise would be greatly appreaciated.  I looked at some of the other answers but I have no idea where the Hold button would be on this.  Thanks.

    Try here:
    iOS: Not responding or does not turn on

  • My IPOD 7th Generation is not compatible with my cars audio system. I had the IPOD nano 4th generation earlier and it was perfectly working on my car audio system. Is there any way i can make the IPOD Nano 7th generation compatible with my car audio syste

    My IPOD 7th Generation is not compatible with my cars audio system. I had the IPOD nano 4th generation earlier and it was perfectly working on my car audio system. Is there any way i can make the IPOD Nano 7th generation compatible with my car audio system?

    I am assuming you are using the Lightning to 30 pint adapter and it is not working?

  • I am trying to import developed images from LightRoom 5 in o Photoshop 6.  I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, you do not have necessary access permissions or another progra

    I am trying to import developed images from LightRoom 5 Photoshop 6 for further editing.  I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, or you do not have necessary access permissions or another program is using the file.  Use the 'Properties' command in the Windows Explorer to unlock the file. How do I fix this?  I would greatly appreciate it if you would respond with terms and procedures that a computer ignorant user, such as me, will understand.   Thanks.

    Have you tried restoring the Preferences yet?

  • I am trying to import developed images from LightRoom 5 into Photoshop 6.  I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, you do not have necessary access permissions or another progra

    I am trying to import developed images from LightRoom 5 into Photoshop 6.  I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, you do not have necessary access permissions or another program is using the file.  Use the 'properties' command in the Windows Explorer to unlock the file'.  This has not happened before.  How do I change this?

    Could not open a scratch file because the file is locked or you do not have the necessary access privileges. (…) | Mylen…
    Mylenium

  • I ordered my new S5 online and after following the steps outlined in exact order, my old phone no longer works and the S5 will not authenticate.  Now I have no phone and I am becoming frustrating.

    I ordered my new S5 online and after following the steps outlined in exact order, my old phone no longer works and the S5 will not authenticate.  Now I have no phone and I am becoming frustrating.
    It downloaded all my contacts, photo's with no problem.  I called the number they gave me from my old phone and then turned it off.  I then put the sim card in and charged the phone.  I followed all the setup steps and no I cannot send any text or make any phone calls.  I get a message that they cannot authenticate my phone to dial #8899 but get the same message.

        Hello Notahappycamper1962
    Let's get that S5 up and running! I want you to love the S5! Is the old device powered off? What zip code are you in?
    I look forward to hearing from you and getting this addressed.
    JoeL_VZW
    Follow us on Twitter @VZWSupport

Maybe you are looking for

  • Hi, can i use a mini dvi male to vga female adaptor for my 2011 mac mini?

    Is a mini dvi the same as a mini display/thunderbolt which my new mac mini has? The monitor is a vga only.

  • Different Version PI 7.0 and SPROXY

    Hi Experts, I am doing ABAP Server Proxy scenarios and I am facing a very different issue in the look and feel of the UI. My current PI version is PI 7.0 EHP1.0 SP4 in which my icon in interface objects appear as MESSAGE INTERFACE. Now when after con

  • Passing data and command in url of the page

    Hi, I have a developed a page which has material as input field on first page now on press of button on that page ,it feteches the data related to that material in the input processing of that page and display output on other page. now i want to disp

  • Sort an XMLList on an attribute value?

    How do you sort an XMLList (or XMLListCollection) on an attribute value rather than the element content? Thanks, ...scott

  • How is PeopleSoft Memory Managed?

    I'm running a custom app engine with one PeopleCode section which is very brief and simple calls an app package. This app package calls another app package that is using a CI. The process is failing after processing approximately 10,000 out of 20,000