I have a 4th generation TimeCapsule, and printer is connected fine to it, but my iPhone doesn't want to print wirelessly, why?
My printer is not "AirPrint" compatible, but I figured that if I can print wirelessly from my computer why can't I do from my iPhone or iPad?
theres are the supported printers that can print wirelessly from the iphone
http://support.apple.com/kb/ht4356
Similar Messages
-
i have a 4th generation 8gb and its stuck in recovery mode. I have tried everything i even got a new computer. When i try to recover it it has to do an update and when its done and error pops up. What do i do i seriously need help
You said "and error pops up. " Just what does the error message say?
-
I have a 192 ip at home but I can't get rid of the 169 ip from my iPhone. My Mac perfectly connects to the wifi but my iPhone doesn't seem to connect to it. Please help!
EUREKA, I found the solution to my problem in a Discussion initiated by gingertodd on July 27, 2011 entitled "Safari in Lion hijacked by malware." The solution was provided by Badunit who recommended force quitting Safari and then reopening it while holding down the Shift key. It worked instantly, and I subsequently was able to open Safari normally by just clicking on its icon in the Dock. THANK YOU BADUNIT!
-
My ipod wont update when i try to update it and it says my network always times out and i get error 3259 i need some to help me please. I have also updated itunes several times but it still fails.
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
My iTouch touch screen will not work. When I go to unlock it, to slide the thing on the bottom of the screen, it doesn't even seem to sense that the screen is being touched. Also, because of this, I cannot turn it off because the screen doesn't know I'm trying to slide the power off slide on the screen. I have tried holding the power button and the button on the bottom to reset it, but it didn't help. Is there anything else I could try?
If it still does it after a restore, you most likely have a bad screen digitizer. Contact Apple and get it repaired.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101 -
I need to know how to rest my iPod when it won't conner to iTunes and says its disabled.
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
Have a 4th Generation photo ipod stuck on connect to power source in restore
I just replaced the 20 GB HD with an 80 GB HD...As I was going through the restore process, I'm stuck at the connect to power source part. I don't have the apple usb wall charger, but I do have a usb wall charger. Do I need to use the one that came with the ipod when I bought it or could I use another usb wall charger?
I'd hate to go and spend any additional money to get this working. Any suggestions?For this particular iPod model (4th gen), you need the square white power adapter that came with the iPod, to complete that last step, if you are using USB for the connection. It has something to do with the connection's voltage. The USB port on the computer does not provide it, and many third-party USB power adapter do not either (some may). The more recent Apple power adapter that looks like a small cube should work.
NOTE: If you happen to use a Mac with a FireWire port, and you have a FireWire docking cable, you do NOT need to connect it to the power adapter to complete the Restore. So a FireWire port apparently provides the required voltage.
If you have an Apple Store nearby, you could probably take it there and ask the Genius Bar folks if you can plug your iPod into an Apple power adapter. Do not have them perform a complete Restore using a Mac, if you use a Windows PC. -
Anyone else having issues with their wi-fi suddenly disappearing?
Is this really a hardware issue out of the blue or could this be a software bug?Download and run this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&ju...
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
so i have an ipad mini (not retina display) i am fully conected to the internet. safari works fine but i loaded up youtube and it saids error while loading. also in safari prompts keep apearing saying server veritification falied. i opened BBC iplayer and started a program it tells me to check my internet conection. this is getting very anoying can anyone help.
so i have an ipad mini (not retina display) i am fully conected to the internet. safari works fine but i loaded up youtube and it saids error while loading. also in safari prompts keep apearing saying server veritification falied. i opened BBC iplayer and started a program it tells me to check my internet conection. this is getting very anoying can anyone help.
-
I have iPhone and an iPad and both if them are connected to wifi service , my iPad work fine connecting to the internet but my iPhone doesn't even though it shows that it's connected to the wifi network , please help me I'm in Spain and I need this phone to work , it was working fine this morning on a different wifi network ,
Hi Charajiji,
Thanks for using Apple Support Communities. This article has some steps you can try if you are experiencing difficulty using Wi-Fi on your iPhone:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Cheers,
- Ari -
I have a 4th generation iPod. My system is Windows 7, 64-bit. iPod not recognized in iTunes. It is in my computer. Also getting iTunes error message about cd/dvd drivers not properly installed. I've restalled 5 times and still not working. Finally got iPod software to properly install. Please help!
Did you try this:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7 -
I have a 4th generation 8GB iPod nano and it will not progress past the blank screen with the white apple logo on it. I have charged it fully and tried to restart it by pressing and holding the menu buttons for 3-7 seconds. The devices screen will turn off and then, after a couple of seconds, the screen with the Apple logo will appear again. This screen will remain lit until the iPod runs out of battery again. I have tried plugging it into my Macbook Pro. I have the newest versions of iTunes software and OS X Mavericks. The computer will not recognize the iPod and the device will not show up in the computers list of devices. I looked up the troubleshooting for the device and found out how to put the device into disk mode. I followed the intructions but the iPod would not go into disk mode. The screen still displayed the Apple logo and would not set into disk mode. I fear that I have run out of options. I have come to this forum in hopes that I can still salvage my device. If there is anything I can do, please loet me know so I can try it. If not, I am affraid I will have to go to an Apple store of authorized retailer and have it repaired or replaced.
Try manually connecting the device to your PC in Disk Mode and then restoring it iTunes.
From http://support.apple.com/kb/HT1363
Putting iPod devices with a Click Wheel into Disk Mode
If necessary, verify that your iPod has a Click Wheel.
Before placing the iPod into Disk Mode, verify that it is charged.
Toggle the Hold switch on and off (set it to Hold, then turn it off again.)
Press and hold the Menu and Select buttons for at least six seconds, until the Apple logo appears.
When the Apple logo appears, release the Menu and Select buttons and immediately press and hold the Select and the Play/Pause buttons until the Disk Mode screen appears.
Connect the iPod to your computer; the screen on the iPod will should say "Do not disconnect".
If you are having difficulty putting your iPod into Disk Mode, set it on a flat surface. Make sure that the finger pressing the Select button is not touching the Click Wheel. Also make sure that you are pressing the Play/Pause button toward the outside of the Click Wheel and not near the center. If you are still unable to put your iPod into Disk Mode, use one finger from one hand to press the Select button, and one finger from the other hand to press the Play/Pause button.
B-rock -
Can I just download the newest itunes and still have my 4th generation ipod work with it?
Download iTunes on the new computer and then:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities -
I have an IPOD Nano 4th Generation 8GB and am unable to restore it back to factory settings even when it is connected to my MAC. I have tried the menu/select hold but is not doing anything. When connected to the MAC and select restore in itunes it comes up with 'Firmware Corrupt'. It also states the IPOD is up to date. I have the latest operating system on my MAC and wonder if this may be part of the issue?
Can anyone shed light as to what i can do to reset it back to factory settings as would like to sell it and ensure it is ready for the new owner.
Thanks
jay68gSee here: What to do if iPod can't be updated because the firmware file was corrupt or not found
B-rock -
I have a 4th generation ipod classic (click wheel) and it's giving me a sad ipod error as well as not mounting in itunes... I hear a clicking inside when it is connected to power but nothing is working. Help!
You won't believe this but a friend of mine (who happens to be an Apple Genius) told me to put a towel or cloth on a sturdy countertop (I know this may sound weird) but hold the selct button (in the center) and menu part of the wheel at the same time until an Apple logo comes up on the screen and then quickly turn the ipod on it's side and wack it on the counter where the towel is so as not to damage anything cosmetically. It seems the clicking is the hard drive reader is stuck and this dislodges it. Mine works now (no clicking) and all seems to be well again. Who knew?
Maybe you are looking for
-
A Script to Find and Replace Layer Names
Are there any scripts to find and replace layer names? There is an excellent script available for Photoshop which allows you to not only replace words in layer names, but also insert words as Prefixes, Suffixes and Sequential Numbers. The illustrator
-
Intel display audio says this device cannot start Code 10
What is this code and how can it be corrected. When I look at the device manager it says: This device cannot start. (Code 10) STATUS_DEVICE_POWER_FAILURE Help
-
Question on form based authentication - beginner
Hi I am currently tracing the flow of a web -app. The form based auth has been configured. My doubt is .. Incase the user is valid he is redirected to the home page of that app. Pls help me to know where exactly this will be configured. Thanks in adv
-
Auto suggested words in iMessages
When I first got my iPhone 6, using Messages, as soon as I started typing a word (first few letters), I would get 3 suggested words above the message. Now I don't see that anymore. Wondering if I accidentally turned off this feature and how to turn
-
NoSuchFieldError: _data on home-grown license server
Setup the "Flash Access Server for Protected Streaming" and have it playing back just fine in the Adobe test player. Trying to use the "Reference Implementation" source as a rough guide for building a license server from scratch. When calling License