I have a 5300 but nothing saves to the memory card...
I've just bought a 5300 with a 2gb memory card, but all the music & pics i put on it seems to save to the phone & not the card. Have only got about 5 mp3's on it & says memory is full! Does anyone know how to fix this???? Thanks!!
Whenever you transfer anything,just use the DATA STORAGE(Drag&Drop Facility)not the Nokia Mode.
CHeeRios!
Similar Messages
-
itunes could not be connected to ipad because it is locked with a passcode, i must enter a passcode on the ipad before it can be used with itunes but all i see is "iPad is disabled connect to itunes" I have a passcode but nothing shows on the screen
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
I have ab HP 3250 e all in one printer. I have downloaded the software and installed on my Mac Book Air running OS X Mavericks. When I try to print from the Mac Book it shows that it is printing but nothing happens at the printer end. Why?
For some reason I cannot synch my iPhone notes with the Mac Book. How dodo I do this?
How do I change my primary email address on the Mac Book?Hello Bruarong,
It sounds like you are unable to print to your printer from Mac OS X Lion. I recommend the troublehsooting from the article named:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/ts3147
Follow these steps until the issue is addressed:
Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
Reset the printing system, then add the printer again.
If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
Contact the printer vendor or visit their website for further assistance.
Thank you for using Apple Support Communities.
Take care,
Sterling -
i got an mp3 file and got it on itunes but when i try to get on my phone nothing happenes. my family have helped me but nothing is working. i don't want to delete anything. DONT KNOW WHAT TO DO!!!!!!!!!!!!!
Yes but all your previous content from the old computer will be erased.
Read this:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive -
I was given an iPhone 3G, reset it, and now have picture which I believe indicates I should connect to my computer and iTunes. Have done so, clicked download which was done, but nothing changes on the phone. I know I can only upgrade to ios 4.2 but how do I do this?
Hello challenged37,
From what you describe it sounds like the phone is in recovery mode. Try connecting the phone to the wall charger that it came with, and perform a reset then connect it to iTunes again and try:
Reset
You should reset your device as a last resort and only if you can't restart it.
To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
From: Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/ht1430
Here is some additional info on what to do if the device still doesnt show in iTunes from the article named:
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
If you see the Connect to iTunes screen but the device does not appear in iTunes, follow these troubleshooting steps if you're using a Mac, or these steps for Windows computers.
Thank you for using Apple Support Communities.
Cheers,
Sterling -
Please help me. My YouTube app will not work. Every time I open it says 'cannot connect to youtube'. I have searched for help and tried resetting my settings and rebooting my ipad2 but nothing has solved the issue.
Yes, I am connected to the Internet through my wifi. Everything is working fine with the e eption of youtube. I have reset all Internet settings and have tried synching to iTunes followed by rebooting. This is all the advice I have found although none of it has been helpful.
Has anyone else encountered this problem? -
The display suddently changed two days ago. Everthing exploded in size. I have tried changing the contrast but nothing works. The display screen becomes either too wide, too long, or too narrow and in all cases the font is extra large and out of focus. What can I do please I am really disappointed since my iMac is only 2.5 months old.
Don't think so. But tried it anyway. I have been into utilities and tried different contrast settings now I don't know what is the right one. But no matter which one I tried I have either about a third of the screen black, with display centered as though hidden behind the black. What is going on?
Also, I have to say that I can't understand why there is no information anywhere on what the correct settings should be.
Any ideas Capt? -
My ipod nano was working fine until i uploaded some new tunes today. It sync properly and once disconnected it just switched off and would not even turn on. I have put it on charge for a few hours but nothing happens, infact the charger is getting hot. Pleaseeeeeeeeeeee help I need my ipod.
The backlight burned out from getting it wet. You will have to replace the screen at a 3rd party shop, buy a screen and replace it yourself, or make a Genius Bar appointment at your nearest Apple Store and do an out-of-warranty replacement for $199 USD.
-
My iPhone 4 died and I have tried charging it and plugging it into the computer, but nothing happens execpt the dead battery thing that pops up when you charge it when it's completely dead.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I HAVE BOUGHT AN IN-APP PURCHASE, I WAS BILLED, BUT NOTHING CHANGED IN THE GAME! WHAT DO I DO NOW??
The game is WSOP by PLAYTIKA LTD. I tried to contact them But there is no means of contact! NOT EVEN THROUGH THE DEVELOPER PAGE ON ITUNES!There is no need to shout.
If you haven't received the IAP then try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption -
ipod nano 3rd gen unit windows xp. Nano is locked, though never have done a manual lock on it. Screen is lit and lock button shows. Have latest itunes, but nothing syncs. Have done everything on supports pages including toggle hold button, etc. Screen stays locked. Help please.
Sounds like the hold switch is broken, meaning you'll need to have your iPod serviced/replaced either by Apple or a third party repair company.
B-rock -
when i start my ipad 3 the apple logo appears but then a loading bar appears and it stucks i have restarted it but nothing is happening pleeeeease help me! i love my ipad sooo much.....!!!
Try this first.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
If that does not help, you may have to restore your iPad.
iTunes: Backing up, updating and restoring iOS software.
If that doesn't work - You will have to use recovery mode
iPad: Unable to update or restore -
Music I already have on my computer will not pull up in itunes. I dragged the files, copied the files, and even tried adding the files but nothing works. The songs play on any other program except for itunes. What do I do??
OMG......THANK YOU THANK YOU......I been reading articles after articles and nothing was working......tryed the Crtl+S and there it was. I can not thank you enough......I appricate it Can not believe it was that simple. I am one happy person again.....
-
when I launch it nothing seems to happen, if I look in processes in task amanegr it seems to be running but nothing happens on the screen, after a few minutes I get a run tme error.
The window could be opening off screen.
*See --> http://www.sevenforums.com/tutorials/75291-offscreen-window-move-back-desktop.html
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.''' -
I just purchased a new mac mini and would like to use my old dell monitor. I tried a HD to VGA adapter converter,it plugs in, but nothing shows on the monitor. Any suggestions?
What do you mean by "HD to VGA adapter converter"?
Do you mean have an HDMI to VGA adapter connected the the Mini's HDMI port?
Or maybe you plugged n the the included HDMI to DVI adapter and then connected a DVI to DVI adapter?
In either case that will not work since VGA is analog and the Mini's HDMI port is digital only.
You need to purchase a mini displayport to VGA adapter. It plugs into the Mini's Thunderbolt port.
http://store.apple.com/us/product/MB572Z/B/mini-displayport-to-vga-adapter
Make sure you get a name--brand one. I purchased some el cheapo, no-name ones and they did not work
Maybe you are looking for
-
Bonjour for Windows no longer works after SP3 is installed
Bonjour for Windows was working fine until SP3 came out. Now I can see the printer and Bonjour goes through the motions to set it up, but I can't print to the printer. The whole construct of "Printer.local" or "AirPortExpress.local" doesn't seem to w
-
Has there been some change in the way Photoshop (and ID for that matter) reference files? The following script fragment works perfectly for CS4: set the_file to choose file tell application "Adobe Photoshop CS4" open the_file end tell But the CS5
-
Is there a way to test a modem?
I have an iMac g4 (with the swivel screen). I have been unable to connect to the internet server lately. The modem dials and starts handshaking and then hangs up before ever reaching the password authentication stage. Is there a way to verify the mod
-
Hi, I've embedded font into an SWF in the following manner: package resources.fonts import flash.display.Sprite; public class _Arial extends Sprite [Embed(source='c:/windows/fonts/Arial.ttf', fontName='_Arial')] public static var _Arial:Class; Now wh
-
Mail will download email again even if deleted
I deleted an email by mistake and wanted to sync with my yahoo email it would not download the email. Any thoughts? Brian