I have a 5800xm with this problem
HI all .. i have this problem with my 5800xm that i cant update it from nokia updater or from the phone .. my product code is 0549361 .. ana when i ask i get this answer Sorry, there is no software currently available for that product code via the Nokia Software Update tool.
so what is the problem ?? thanka fo any answer i get to help .
Solved!
Go to Solution.
http://linux.sgms-centre.com/nokiafaq/branded-phones/ might answer your question.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!
Similar Messages
-
My iPhone 6 ear speaker is not working properly I couldn't able to hear any thing from ear speaker to listen I had to put on loud speaker or to use hands free please help me out with this problem if some body have answer?
Hi Venkata from NZ,
If you are having an issue with the speaker on your iPhone, I would suggest that you troubleshoot using the steps in this article -
If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L -
I need advise and help with this problem .
First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product .
At the present time I'm having lots of problems with the router so I was looking in to some info , and come across one web site regarding : port forwarding , IP addresses .
In my frustration , amongst lots of open web pages tutorials and other useless information , I come across innocent looking link and software to installed called Genieo , which suppose to help with any router .
Software ask for permission to install , and about 30 % in , my instinct was telling me , there is something not right . I stop installation . Delete everything , look for any
trace in Spotlight , Library . Nothing could be find .
Now , every time I open Safari , Firefox or Chrome , it will open in my home page , but when I start looking for something in steed of Google page , there is
''search.genieo.com'' page acting like a Google . I try again to get raid of this but I can not find solution .
With more research , again using genieo.com search eng. there is lots of articles and warnings . From that I learn do not use uninstall software , because doing this will install more things where it come from.
I do have AppleCare support but its to late to phone them , so maybe there some people with knowledge , how to get this of my computer
Any help is welcome , English is my learned language , you may notice this , so I'm not that quick with the respondGenieo definitely doesn't help with your router. It's just adware, and has no benefit to you at all. They scammed you so that they could display their ads on your computer.
To remove it, see:
http://www.thesafemac.com/arg-genieo/
Do not use the Genieo uninstaller! -
I have just started using WD external hard drives, I use it to save my movies and music on. On more than one occasion, when I connect it to my MacBook it erases everything I had save on the hard drive. Can someone please help me with this problem? I am super tired of having to put all of my movies and music on the hard drive just to have it erased again. The products I am using are WD 4TB My Book and 2 TB My Passport external hard drives. When it happens, there is always an icon that reads, EFI, along with the My Book icon. Thank you for your assisstance.
dwgar1322 wrote:
I have just started using WD external hard drives, I use it to save my movies and music on. On more than one occasion, when I connect it to my MacBook it erases everything I had save on the hard drive. Can someone please help me with this problem? I am super tired of having to put all of my movies and music on the hard drive just to have it erased again. The products I am using are WD 4TB My Book and 2 TB My Passport external hard drives. When it happens, there is always an icon that reads, EFI, along with the My Book icon. Thank you for your assisstance.
Yes, you have WD software installed REMOVE IT !!
WD has warned its customers about their huge mistake that their software doesnt work on Mavericks and causes data loss.
(also dont use WD drives anymore)
Read all about it here:
https://discussions.apple.com/thread/5475136?start=255&tstart=0
See their website on removing the destructive WD software here:
http://community.wd.com/t5/External-Drives-for-Mac/External-Drives-for-Mac-Exper iencing-Data-Loss-with-Maverick-OS/td-p/613775
Western Digital External Hard Drives Experiencing Data Loss On OS X Mavericks
http://www.cultofmac.com/252826/western-digital-external-hard-drives-experiencin g-data-loss-on-os-x-mavericks/ -
Hi, I have backed up 2 IMACs and one Mac Book Pro but for some reason, the 3rd IMAC come up with this problem: The backup disk image “/Volumes/Data/Anthony’s iMac.sparsebundle” could not be accessed (error -1). Why? The computer system is up to date and I have had no issue with the other computers, just this one.
Many thanks
AnthonyTry this Discussion...
https://discussions.apple.com/message/18783684#18783684 -
Photoshop cs6 won't allow me to highlight my existing text layers. I select the text tool and the text layer I want to edit, hover over text and each time I attempto to edit a new layer is created. Does anyone have experience with this problem?
Be sure you go to Adobe's Web Site and make sure there are no Updates for CS6
http://www.adobe.com
Remember if you have trouble with a software issue it is the software and not caused by the Mac you are using
Many users simply don't remember when you upgrade software you normally have to go to 3rd party web sites and update software as well.
Cheers
Don -
Every time I sync my iPhone with iPhoto I end up getting duplicate photos on my iPhone. The other problem is that I can not delete the dups on my iPhone. Does anyone have an answer to this problem?
Mike whether I create a folder within the Pictures Folder that iTunes uses to sync photographs or just copy them into the main folder the result is the same, I end up with Photo Library plus another album containing an identical set of pictures as contained in Photo Library.
The User Manual for iOS5 states ...
You can create, rename, and delete albums on iPhone to help you organize your photos and videos.
Create a album: When viewing albums, tap Edit, then tap Add. Select photos to add to the new album, then tap Done. Note: Albums created on iPhone aren’t synced back to your computer.
Rename an album Tap Edit, then select an album.
Rearrange albums Tap Edit, then drag up or down.
Delete an album Tap Edit, then tap the delete sign.
Yes I can Add a new Album, but cannot delete an album already created. The delete sign does not appear.
In iTunes the only folder that I can see listed is the man one into which iTunes stores pictures, which I have named iPhone Photos.
When I look on my PC this iPhone Photos folder contains another folder named iPod Photo Cache and a multitude of folders created by iTunes, the named F00, F01,F02 etc etc. and a Photo Database file.
Now whether I create a seperate folder within iPhone Photos to store my favourite photos in, or just copy them all into the iPhone Photos folder without being encased within another folder, or create a folder inside the iPod Photo Cache folder the result is the same ...
I end up with Photo Library plus another album containing an identical set of pictures as contained in Photo Library.
I am going around in ever decreasing circles here and getting nowhere fast!! -
powerpoint presentation I have stored in icloud until recently were syncing to Keynote on my iPad with no problem. Now when I open Keynote on my iPad there is nothing. I could use some help with this problem.
Morning AndreD86,
Thanks for using Apple Support Communities.
These articles explain exactly what is backed up by using their method.
iTunes: About iOS backups
http://support.apple.com/kb/ht4946
and
iCloud: Backup and restore overview
http://support.apple.com/kb/ht4859
Also we want to double-click the Home button and swipe the Task Bar to the right.
Then make sure the button on the far left of Task Bar is not muted.
Best of luck,
Mario -
hey! i have a serious problem coming up which is that i am asked to enter my billing info even for free apps. why should i pay for apps which are free? please help me with this problem! and in the billing info there is pop-up box saying i have accessed my account from didfferent computer but no i have been doing it from the same pc. please help me out.
Tap Settings > General > International. Make sure the Region Format is correct.
As for your Apple ID. Tap Settings > Store > Apple ID > iForgot
Resetting your Apple ID may help.
Congrats on your new iPad !!! -
After performing a routine software update this week, I am having problems with both of my email accounts. I am unable to "Reply" to any emails. Does anyone have a solution to this problem?
I am having the same problem also Thought it was my network and reset everything including Apple TV but still the problem is there . I assume now it is down to iOS 8 prior to that was perfect
-
I have a red vertical line on the right side of my screen and it will not go away tried restarting my computer and that didn't help at all, please help me with this problem it is kind of annoying
If it's a thin 1 pixel wide vertical line it's highly likely it could be caused by a defective LCD.
One quick basic way to check is to note the position of the line. Then go to System Preferences, Displays, and lower the resolution. If ther line moves it's on the video and the logic board or video card if fitted is likely to be defective. If the line stays in the same position it's likely to be an LCD fault. Either way to have it repaired you'll need to visit an Apple store or AASP.
The worst offender for this problem is the Late 2006 17" iMac. FOC replacement of the LCD used to be covered by a quality program, but it's now ended.
Steve -
i have a 2008 imac with snow leopard. i installed update 10.9.3 not realizing it's best for Maverick's users. Now my Itunes 11.2.2 won't burn playlists to CD. Anyone else with this problem? CAn I uninstall the 10.9.3 update? Also my HP scannerwill not save the displayed scanned document since this update! it just saves gray.
If you have your old system backed up then erase the drive and restore your backup. If you don't have a backup then backup your entire Home folder. Erase the drive and install Snow Leopard after which you can restore your Home folder from the backup.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
with your computer. Insert the disc into the optical drive and restart the computer.
After the chime press and hold down the "C" key. Release the key when you see
a small spinning gear appear below the dark gray Apple logo.
2. After the installer loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the Utilities menu.
After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
size.) Click on the Partition tab in the DU main window. Set the number of
partitions to one (1) from the Partitions drop down menu, click on Options button
and select GUID, click on OK, then set the format type to MacOS Extended
(Journaled, if supported), then click on the Apply button.
3. When the formatting has completed quit DU and return to the installer. Proceed
with the OS X installation and follow the directions included with the installer.
4. When the installation has completed your computer will Restart into the Setup
Assistant. Be sure you configure your initial admin account with the exact same
username and password that you used on your old drive. After you finish Setup
Assistant will complete the installation after which you will be running a fresh
install of OS X. You can now begin the update process by opening Software
Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Or you can:
Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
computer and after the chime press and hold down the OPTION key until the boot manager
screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Reinstall the 10.9.3 update: OS X Mavericks 10.9.3 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Reinstall the 10.9.3 update: OS X Mavericks 10.9.3 Update (Combo). -
I have a LG Lucid phone and after the recent LG software update, I have not been able to import my Outlook mail. Anyone else with this problem?
Connecting through email is extremely important these days donhinson. Let's get this fixed today. I first recommend removing the email account and readding it back to your device.This will help reset the settings. Listed below are steps to check the email settings, outgoing, and incoming servings.
1.From a home screen, select Apps (located in the lower-right).
2. Select Email.
3. From an Inbox, select Menu ( located below the display).
4.Select Account settings.
5.Select Account display name.
6.Enter an name then select OK.
7.Select My name.
8.Enter the name then select OK.
9.Select Signature.
10.Select the desired signature.
--To add a custom signature, select New signature (plus ( ) symbol located in the upper-right), enter the signature then 11. select Save.
12.Select Retrieve interval.
13.Select one of the following:
--Manual
--5 minutes
--10 minutes
--15 minutes
--30 minutes
--1 hour
--2 hours
--4 hours
--8 hours
14.Select Maximum emails to show.
15.Select one of the following:
--20 messages
--40 messages
--60 messages
--80 messages
--100 messages
--200 messages
--500 messages
--1000 messages
16.Select Delete from server.
17.Select one of the following:
--Never
--When I download from server
--When I delete from device
18. Configure the following as appropriate:
-- Enabled when a check mark is present.
--Forward message
--Forward attachment
19. Select Change login settings.
19. Ensure the following settings are correct then select Save:
--Username
--Password
--Email address
--INCOMING SERVER SETTINGS
--POP3 Server
--Secure type (e.g. Off, SSL, TLS)
--Port number
--APOP secure login
-- Enabled when a check mark is present.
--OUTGOING SERVER SETTINGS
--SMTP Server
--Secure type (e.g. Off, SSL, TLS)
--Port number
--Authentication. Enabled when a check mark is present.
--Username
--Password
I hope the information above is helpful.
KinquanaH_VZW -
I have just installed iTunes for the first time. When I run the application I get a "iTunes not working" message. Operating system Vista (32 bit). I have tried reinstalling with all firewalls off, but still no success. Have other people had this problem?
Drrhythm2 wrote:
What's the best solution for this? I
Copy the entire /Music/iTunes/ folder from her old compouter to /Music/ in her account on this new computer. -
My nano blinks the apple logo when plugged into a charger and will not respond to any reset commands, anyone have experiance with this problem?
By a reset, I assume you meaning pressing and holding both the Select (Center) and Menu buttons (or Volume Down and Sleep/Wake buttons on the 6G Nano) long enough for the Apple logo to appear?
What happens if you try to manually place the iPod into Disk Mode? If you can do that, I would recommend connecting the iPod to iTunes and restoring it.
Putting iPod into Disk Mode
B-rock
Maybe you are looking for
-
ITunes Match warning,"This device is already associated with an apple id" .How do I solve?
iTunes Match warning,"This device is already associated with an apple Id. How do I resolve this?
-
Cant change the read only status of certain folders on my FAT32 external HD
Help someone please. I have this external hard drive that has all of my music files on it. I was using it with my pc before but am making the difficult transition into mac land now. well over the last few months really. its not proving to be as easy
-
How to determine the creation date/time for a file?
The important operating systems maintain both a creation date/time and last modified date/time for files. But in the File class there is only a lastModified() method. How does one determine the creation date/time for a file?
-
Preverification Error while using kXML with Netbeans IDE
Hello All, I am using Netbeans IDE for wrting a program that parses a xml using kXML and display some results on screen. The Netbeans IDE gives the various obfuscation levels. The code is properly compiled at any level less than the highest obfuscati
-
Access migration - error handling field default value "=Now()"
Hi All, I'm doing an Access - Oracle Migration. I've exported the structure, captured the model and generated the SQL. When I run the SQL I get: SQL Error: ORA-00907: missing right parenthesis 00907. 00000 - "missing right parenthesis" It looks like