I have a 6 yr old airport express. im using windows xp home edition. i cant get my computer to recognize my a.e. suggstions?

i have a 6 yr old airport express. im using windows xp home edition. i cant get my computer to recognize my a.e. suggstions?

Was the AirPort Express previously working with the PC using XP?
What service does the Express perform on your nework?
Is the indicator light on the AirPort Express green, slow blinking amber, or solid amber?
Please tell us about any troubleshooting steps that you have already performed, and what happened after each step.

Similar Messages

  • I have tryed to connect an AirPort Express to my wireless network. But I alwais get the errocode -4. Can anybody help. I have reset the AirPort Express and updated the software.

    I have tryed to connect an AirPort Express to my wireless network. But I alwais get the errocode -4. Can anybody help. I have reset the AirPort Express and updated the software.

    The ZyXEL P-2601HN-F1, as you know, is a combination DSL modem & 802.11n wireless router (or gateway device).
    For your goal you will want to take a look at this Apple Support article for details on how to configure an AX for iTunes.
    If you are still having difficulties with the AX joining the ZyXEL's wireless network, you can try the following:
    Temporarily disable wireless encryption.
    If you are hidding the SSID, disable that feature.
    Change the Mode Select setting to: 802.11g Only
    Change the Channel Selection from "Auto" to a set channel, like 1, 6, or 11

  • Can an older Round Airport Extreme and Airport Express be used on my home WIFI network?

    I recently upgraded my Macbook Pro to a newer one because I was having problems with the older one getting on my home WIFI network.  It had been dropped, but had continued working without any hiccups for five or six months.  Suddenly it won't go online.  It said there was no WIFI hardwae installed.  I suspect that the WIFI antenna connection between the main bdy and the display failed.  Repair options at the Apple Store were iffy, so I just baought the new one.  My Time Machine backup smoothly cloned my old machine onto the new one. 
    In the "when it rains it pours" category, my Airport Extreme also failed at the same time I began having problems with the old laptop.  Suspecting the hardware was the problem after checking with my ISP, I purchased a new Airport Express at Best Buy.  Using it, I got my WIFI network back up and running.  That's why I figured there was a problem with the older Airport Extreme.  The Airport Extreme was replaced by an Apple Genius at the store, when I purchased the new laptop.  Putting my Home WIFI network back together with the new AE, went fine, but it turned up another problem.  I use an older (pre-N speed) Airport Express to link a YAMAHA digital piano wirelessly to my WIFI.  It can go online directly and download music.  I can also push my iTunes wirelessly through the piano's amplifier and speakers for great sounding stereo.  The problem is my new AE won't recognize my older Airport Express.  I tryied downloading the Airport Utility v. 5.6 as suggested online, but It still won't find the Airport Express hooked up to the piano. 
    Is there any way to update my earlier Airport Express and also an older Airport Extreme (round)?  The Airport Utility v.5.6 won't recognize them and initialize them.  Any ideas?  I repurposed the new Airport Express I bought to seerve my printer, allowing me to disconnect the USB cable from my iMac.  That's working fine, except my HP OfficeJet Pro 8500 now won't give me two sided printing anymore.  It always something!
    Network consists of:
    20" Mid 2007 iMac running Mac OS Lion 10.7.4
    New 15" MacBook Pro running Mac OS Lion 10.7.4
    HP Officejet Pro 8500 All-in-one Printer
    New Airport Extreme attached to DSL Modem
    New Airport Express wirelessly attaching my Printer to the network
    Old Airport Express (A/B/G) connecting my Yamaha Digital piano (NOT WORKING)
    Old Airport Extreme (round) (NOT WORKING)

    Bob,
    Thanks for your help.  At this point, I'm seriously considering replacing the older "g" AX with a new "n" model.  For whatever reason, each time I've tried to bring the ols AX bcak online in my network, it only managed to screw up my network.  Using the Airport Utility 5.6 for Lion, I was able to get a green light on the AX, but it still would not go online from my Yamaha digital piano control panel, like it always did before.
    Using AUtil 6.0, everything else works, and I'm assuming that setup with a new "n" speed AX, my piano will be able to get back onlune, too.  When I originally set up the AX to link the piano to my WIFI network, I had very little trouble getting it setup.  YAMAHA didn't list the Apple AX in it's list of compatible wireless routers/adapters, but I saw no reason that it wouldn't work.  As I said it was a reasonably easy setup the first time, and it has worked for several years with no problems.
    It's not the cost of buying the new AX that bugs me, it's the fact that I can't figure out why it won't work now when it did before.  It was working fine with my old AE based WIFI network, even after upgrading the my computers to the Lion OS.  I used to be reasonably savvy with Apple technology, having spent the last 15 years of my teaching career (1987-2001) as the tech liason for the schools where I worked, supporting first Apple II's, then Macs, and networked buildings.  After eleven years of retirement, I find it harder and harder to keep up as the technology just keeps evolving.  I'm trying, but it's not easy!  Any and all help is appreciated!

  • Can an airport express be used as a home plug.

    Can I use the Ethernet port on my a e as a homeplug

    When you say "homeplug", if you are referring to Ethernet over Powerline, or EOP, the answer would be no.
    However, if you had a separate EOP adapter, you could connect an Ethernet cable from the adapter to the AirPort Express.

  • I have a new 1st Gen ipad and cant get my computer to recognize in devices in itunes or

    My old ipad was replaced from the apple store with a new 1st gen ipad.  I plugged it into 2 different computers (windows 7 and windows 8) and it was not recognized by the computers or itunes.  I updated to the newest itunes on both machines.  The ipad is charging but it only shows a "connect to itunes" icon.  Please help.

    When the AirPort Extreme is in DHCP and NAT mode, it is the product that is controlling the number of devices that can connect to your network......which is around 200.
    When the AirPort Extreme is in Bridge Mode....it is your "modem" that is controlling the number of devices that will be allowed to connect to the network. Your modem is not really a modem, it is a modem/router or gateway type of device.
    If everything seems to work OK with the AirPort Extreme in DHCP and NAT mode, you do have the option to click to "ignore" the Double NAT error, and the AirPort Extreme will display a green light.
    Double NAT occurs when there are two devices...your "modem" and the AirPort Extreme....on the network and both of them are trying to control DHCP and NAT at the same time. Normally, you only want one device on a network providing DHCP and NAT service.
    In order for your modem and AirPort Extreme to work correctly, it is the "modem" that needs to be set up in Bridge Mode, so the AirPort Extreme will supply DHCP and NAT services for up to 200 devices.
    That may, or may not be easy to do, and your ISP may not support your "modem" in that type of setup.
    It is up to you to decide whether you want to try to set things up correctly, or leave well enough alone.

  • I have an old Airport Express I want to use to extend WiFI (which is best Airport Express or Extreme) and to have a HD for storing Itunes connected to the old Airport as well.         I would also like to have the new Airport hardwired to my Mac (desktop)

      I am willing to buy a new Airport Express or Extreme so I can get at least one LAN port - but only if I can use that LAN port to connect to my MAC (desktop) so it doenst have to get internet via the WiFi- AND so I can set it up as its own hot spot.  I think I saw that was possible??  That way my guest network would be separate from my home Network.  Just trying to get the best layout. I have cable modem to old Airport now and USB from it to printer. 
    Maybe a new Airport - again USB to printer and LAN to MAC(?) then old Airport elsewhere in the house to extend the signal and use USB off it to hard drive to store Itunes?  Would LOVE to have it there to use for Airplay etc- Is that possible- I have read many comments and still not sure if it is possible or not.
    Baxically I need a simple solution to storing all my photos- music and movies (MAC only has 500GB) AND have a great back up; Currently have a 1TB drive as Time Machine - so could use that for back up- but running out of space on MAC for all the media I am saving.  THANKS!!

    You are asking several different questions. If you need to store your photos, music, and movies on an external volume, you certainly can. Any externally connected hard disk drive will work, connected either directly to your Mac or to your Time Capsule as a shared volume.
    You should not rely upon using that as a backup device though. Although you certainly may use it for both purposes, it is a better idea to have dedicated backup devices for a variety of reasons not limited to redundancy. You would not want to simultaneously lose all your pictures as well as your backup. If they are all on the same device, that could happen. Furthermore, a backup cannot back up the volume on which it is running.
    As for adding an Extreme or Express, using its LAN port for your iMac, and then enable Internet sharing so you can effectively use the iMac as a "hotspot", you can do that too, but I am unclear on what benefit you believe this arrangement would convey for you.
    An Extreme's Guest network is separate from its Main network; that is the reason for having it.

  • I have read all of the similar issues on this site and I still cannot connect my airport extreme (although there is no problem with my old airport express - help...

    i have read all of the numerous and similar issues on this subject.  and i still cannot connect my new airport extreme.  my old airport express works fine still.  help.  and why are there so many issues with connecting this stuff?  i thought this stuff was supposed to be getting easier, not harder... thanks.

    Sorry, but I have no idea on what you have read and tried so far so please forgive me for any redundancy.
    Is your AirPort Extreme the only router in your current network configuration? Which exact model is it? If there are other routers being used, please provide their make(s) & model(s). Also the make & model of your Internet modem.
    What is your goal with the Extreme? Is it to replace the "old" AirPort Express? Will you still be using the Express for any reason(s)?

  • I have an old Airport Express. How do I get Airport Utility to recognise it?

    I have an OLd style Airport Express that I was using with my 2007 iMac and Tiger. Recent upgrade to Mountain Lion.
    How do I get the Airport Utility to recognise it so I can set extra stuff?
    AndrewH66

    Here are the AirPort Utility downloads:
    http://support.apple.com/downloads/#airport
    Bottom line: I don't believe it's possible to use your old AirPort Express with Mountain Lion.  The current AirPort Utility is 6.3.1.
    I'm assuming you have this one (from around 2004):
    http://support.apple.com/kb/SP76
    If instead you have this one (from arount 2008):
    http://support.apple.com/kb/SP1
    ... then AirPort Utility may well support your device.

  • HT4259 I have the old airport express but my iPad 3 is not able to connect to it even with the app downloaded. What can I do?

    I have the old airport express but my iPad 3 is not able to connect to it even with the app downloaded. What can I do?

    Use a windows computer.. or ask a friend to bring a windows laptop and use the 5.6 version windows utility.

  • I have an old airport express, but the software on my computer does not accept it. I need to downgrade the software, but the older software will not install.

    I have a old G4, I want to give to my son. It does not have a wireless card and because his room is on the second floor it is impossible to connect with a wire.
    I wish to add an airport express to my airport extreme network and connect the computer and the airport express together with a cable. Is this possible?
    second question:
    software does not install.
      I do have a network with a airport extreme and want to add the old airport express to it. I want to do this with airport software, however the software tells me the airport express is to old and i need to reinstall older software 5.6 to be precise. However installing fails, so I thought i just remove the airport software, but osx does not allow me to do that.

    i managed to install the older airport utility and am trying to set up a connection with an existing network, but airport utility cannot find the airport extreme AFTER it starts up again. I then went and again restored it to its factory settings and did the whole procedure again with airport utility, but again after utility tells the airport express to restart it does not come back.

  • I have an old Airport Express that won't connect/set up with Yosemite. Any help appreciated

    Hi, as the title suggests I have an old Airport Express that I have always used wirelessly to connect to my hifi but now that I have upgraded to Yosemite it won't connect via Airport Utility  6.3.4 and Yosemite won't let me use Airport Utility 5.6  Seems I'm stuck between a rock and hard place! Ethernet is no use as the hifi is in another room. Yosemite is running on an iMac and is connected wirelessly to Virgin Broadband. Thanks, Alex.

    If the AirPort Express is very old, such as the original 802.11b/g - only models A1084 or A1088 you will need a commensurately older version of both AirPort Utility and OS X to configure it. Those models were discontinued about seven years ago and support for them is gone. Ethernet won't make a difference anyway.
    You may find instructions or links to web sites with instructions to modify OS X in an effort to circumvent that restriction. I cannot emphasize enough just how bad an idea that would be.

  • I have a new Airport Extreme and an old airport express.  I am getting an amber light on the new Extreme and a green light on the Express.   I have internet no problem but the status light is blinking amber

    I have a new Airport Extreme and and old airport express.  I am getting an amber status light on the Extreme and a green light on the Express.  The Extreme is blinking amber all the time.
    I have internet and everything seems to be working.
    I have reset and pulled the power cord on both the extreme and the internet block
    How do I make it Green?

    If things seem to be working OK, but the amber light is flashing......the AirPort Extreme has a message for you. To see what that might be......
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click on the AirPort Extreme icon
    Click on the amber dot in the small window
    It might be a message that a firmware update is available for your AirPort Extreme.

  • I have the airport express as router can I buy the new airport express and use my old airport to extend my net?

    I have the airport express as router can I buy the new airport express and extend my net?

    Things can get confusing pretty quickly since there are 3 different versions of the AirPort Express.
    If by "old", you mean you have Model No A1084 or A1088 AirPort Express (look at the label on the side of the device for the Model No), it cannot be used with the "Extend a wireless network" feature of other newer Apple routers.
    If your AirPort Extreme is "square" shaped with rounded corners, then the "old" AirPort Express will not work with your AirPort Extreme using the "Extend a wireless network" settings.
    You could use a "previous version" AirPort Express, Model No A1264 to "Extend", or the "new" AirPort Express, Model No A1392, for that purpose.
    If your AirPort Extreme is a simultaneous dual band product, then the "new" Express would be able to "extend" both bands.  The "previous" AirPort Express (Model A1264) would be able to extend only one band, since it is not a dual band device.

  • I have just purchased and installed a new Airport extreme base station but now the Airport Utility cannot see my old Airport Express. Are their compatibility issues and do I need to purchase a new Express?

    I have just purchased and installed a new Airport extreme base station but now the Airport Utility cannot see my old Airport Express. Are their compatibility issues and do I need to purchase a new Express?

    When you can, take a look at the old AirPort Express and locate the model number in the faint print on the side of the device.
    If you see A1084 or A1088, this is an older Express version that is no longer supported by the current version of AirPort Utility that you are using with the new AirPort Extreme.
    If that is the case, your Express is at least 6 years old...probably older...so it is about time to treat yourself to a new version with much faster speeds and more features.

  • I am trying to find out if I can upgrade my old airport express from WEP to WPA2?  If so, how do I do that?

    I am trying to find out if my old Airport Express can be upgraded from WEP to WPA2?  If so, does anyone know how to do this?  I have a new PC for work reasons and I cannot get online with my WEP password.  I realize now this is why my family and friends who bring PC's into the house cannot connect - I need WPA2 for PC, and besides, I should upgrade anyway as this is more secure than WEP.  Thanks for any help!

    Clone your system.
    Install the 10.6.8 Java update.
    Clone back from your clone you made before installing the update when finished.

Maybe you are looking for