I have a 6D. When I turn on my camera, the shutter speed display reads 00.
My shutter speed display on my EOS 6D reads "00". I have tried turning the camera on and off, charging the batteries and removing and replacing the memory card. Any suggestions for what might be the problem?
That sounds bad. It could still just be some weird setting. I have had odd things happen on a camera due to an accidental setting, and so I always try "Clear All Camera Settings" first. In MENU, tab over to the 4th (the last) yellow wrench tabs, and it is about 2/3 of the way down the list.
Perhaps one of the moderators will chime in at some point with something that can help.
Failing that, at some point you might need to send the camera in to Canon for repair. The mods always post the following link when something seems to be actually broken:
******* To start the repair process, you'll need to complete a Repair Request on our website. *******
Good luck.
Scott
Canon 6D, Canon T3i, EF 70-200mm L f/2.8 IS mk2; EF 24-105 f/4 L; EF-S 17-55mm f/2.8 IS; EF 85mm f/1.8; Sigma 35mm f/1.4 "Art"; EF 1.4x extender mk. 3; 3x Phottix Mitros+ speedlites
Why do so many people say "fer-tographer"? Do they take "fertographs"?
Similar Messages
-
I just bought my first Iphone the 5S and when I turn on my bluetooth the ringtone for my text, calendar, etc. comes through my Bluetooth instead of the phone. Is there a way to have the tones use the phone while bluetooth is on?
I would also like this issue addressed.
I am using a Plantronics Voyager Pro+ and when it is connected to my iPhone 4, email and text sounds are not audible through the phone. The phone just vibrates when a new text or email is received.
I don't really care if it plays through the headset, but it should at least play through the phone. I tested the headset from a BlackBerry and the alerts play fine.
Message was edited by: picardsm -
I have been having issues with not receiving texts and voicemails daily, for a few months now. If I turn the phone completely off, when I turn it back on the messages will flood in from hours before. I can't be continually turning off my phone in case someone left me a message. How do I resolve this issue?
Wifi: my Cell phone will remember 10 wifi connections. So delete any you don't use often and your home wifi and try to enter home wifi again.
if it still won't connect to home wifi, call your internet provider for help. You may need a newer router or different settings Or upgraded service. Your phone seeks the best connection and will refuse lesser connections.
last resort. Backup the phone. Do a full reset, then restore as new with the backup.
if still not fixed, go back to apple and insist on repair or replacement.
HOWEVER. voicemail is not a wifi issue, it's a carrier function, which is why the SIM card is a suspect. -
How can I remove the pictures in photo stream? I have already turn off my photostream at the settings but when i turn it on again, the pictures still come out?
Ok you can reset the stream from www.icloud.com
Goto www.icloud.com
Login with your iCould username and password.
and login
Then click on your name in the top right hand side of the screen next to sign out,
it opens a window Account details with Language, Time Zone, Advanced
Select Advanced - Then click Reset Photo Stream. and confirm, the stream will be reset and totally deleted
I still think you should be able to remove individual pictures though, a blured image etc is a problem -
Hello,I have iphone 5,when I turn on cellular LTE don't work just 3G work,what can I do?
ask your phone carrier.
does your phone carrier provide LTE? -
Hello, I have a MacBook Air, when I was watching a movie it started to freeze, so I turned off. But when I turn it on just the white screen appears nothing else. I looked on other websites, but the methods didn't help.
Try a Safe Mode boot ...
Startup your Mac in Safe Mode
A Safe Mode boot takes much longer than a normal boot so be patient.
Once you are in Safe Mode, click Restart from the Apple () menu. -
i cannot use apps on my ipod as when i turn on my ipod the wi-fi works but after a minute of 2 it stops working and then have to wait ages for it to work again. i have checked my internet but my laptop and playstation works work fine.
Try here
iOS: Troubleshooting applications purchased from the App Store -
Hi all,
I need help with my iphone4s.
When I turn on my iphone4s, the apple logo will show for a few seconds, and it will suddenly fade off to a blank screen, and not start up. It will then restart by itself, and the cycle repeats. Any suggestions on how I can troubleshoot this problem?
What seems to be the problem here?
thanks and regards
WanWanlucg wrote:
When I turn on my iphone4s, the apple logo will show for a few seconds, and it will suddenly fade off to a blank screen, and not start up. It will then restart by itself, and the cycle repeats.
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
Then See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766 -
I used utilities to source my 10.6 snow leopard install disc to my main hardrive, and now when I turn on my computer the apple with the spinning wheel stays on the screen and stuck like that. How do I fix it Help please. I already tried all the commands such as Command R, Holding down the Option key, C and holding down shift at the start up but nothing happens.
initialy All I was trying to do was downgrade 10.7 to 10.6 .You have to consider the possibility the hard drive may be dying. If your data isn't backed up, try one of the tools below:
https://discussions.apple.com/docs/DOC-1689
Once you are sure your data is backed up, we can examine other possibilities. In the meantime call AppleCare for your original installation DVDs. You may need them. -
I want to know why when i turn on my iPhone the screen turns white
i want to know why when i turn on my iPhone the screen turns white
Hello Manjanela,
Article: TS2802 may help you with the white screen.
Display shows a white screen
Try turning iPhone off and then on again.
If the iPhone will not turn off, try to reset it.
If that doesn't work, try restoring the device.
Have a nice day,
Mario -
second generation ipod and now when I turn it stays on the screen where it says the date and time and try to log in to use it and I can not to do.
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
. Place the iOS device in Recovery Mode if necessary to allow the restore.
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
when i turn my phone horizontally, the photos/text to not re-orient (they remain vertical) . How can I fix this?, when i turn my phone horizontally, the photos/text to not re-orient (they remain vertical) . How can I fix this?
It is possible that you have the rotation lock on? Check this:
-
my iPad mini is stuck on the Apple symbol. I have tried a reset and it shut down. When I turned it back on, the problem persists. Thanks for any help.
If the reset doesn't help, the next step would be to restore the device to factory settings using iTunes on a computer. If you can backup the iPad first, do so and then restore to factory settings. If it all works out properly, you can restore the backup after you finish. If you didn't or can't backup, the iPad will be erased when you restore to factory settings.
Use iTunes to restore your iOS device to factory settings - Apple Support
IF you can't restore that way, the next step would be to try using recovery mode.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support -
When I turned on my ipad the screen is scrolling grey and white veritcal lines. I turned on the ipad and plugged it up, when I touched the button on the bottom, it flashed as if the screen was coming up, but instead it scrolled grey and white lines, halfway across the screen and has been doing so for about an hour now. How can I fix this? I need it for school. Am I going to have to send it back? And if so, will they send me a replacement while I am waiting for mines to be fixed?
Janellie_love-
You might connect the iPad to its wall charger for half an hour, to be sure there is enough juice to get started.
That sounds like an internal problem, as you suspect. If you can show it to an Apple Store Genius, you may get a replacement on the spot.
If there is no Apple Store near you, look for an Apple Authorized Repair Center. There may be one in your city. I do not know how long it would take, or if a "loaner" would be available. Whether they can fix it on site would depend on what the problem is. <Apple Authorized Repair Centers>
One thing you can try is to reset (reboot) the iPad. Hold both the Home and Sleep buttons for several seconds until the Apple logo appears. Ignore the "Slide to power off" arrow. If it works, the iPad will restart after a couple of minutes. Resetting this way will not hurt anything, and sometimes clears up mysterious problems.
Fred -
When I turn on a video the screen on my MacBook Pro freezes. I've been through Apple Care and they couldn't fix the computer. I think the fan and the graphics are the problems. I can restart after two attempts. Sometimes I use SAFEBOOT
Please advise the model MBP you have and the OSX you have installed.
Also try a SMC reset:
http://support.apple.com/kb/ht3964
Ciao.
Maybe you are looking for
-
I use the up to date version of AVG security. Does this interfere?
-
Trying to upgrade ipad mini to ios7. extracts software but wont restore it . error message 3014..ipad no longer working, just image asking for connection to itunes.Have tried all the troubleshooting suggestions I am capable of. ((((((
-
How to develop custom add-in for sharepoint designer 2010
Hi , Can anybody suggest me how to create a custom add-in for sharepoint designer 2010? Are there any templates through which i can create a managed add-in using C#? or developing COM add-in (VB6) is the only solution? Please suggest. Regards Sujasre
-
At first: I hope you´ll understand my explaination in english.... My problem: I have a lot of folders with mp3 on my external hard drive. I want to put the onto my Xperia Z1. First I have put the sd-card in the reader slot of my notebook an copied al
-
Query Selection Screen does not appear in Web Analyzer
Hi Experts, Query Selection Screen appears when we open the query in Bex Analayzer in production system. But when we open the query in ABAP or JAVA Web view, the selection screen does not appears. As the volume of data in the cube is very high, and s