I have a airport express, M

I assume I am to rewrite my question!!!!
I have a I-Pad it is, 7.0.4, I will be updating to 7.0.6 soon. I also have a Mac OS X,10.5.8 computer, she is
connected to a AirPort Express as an antenna. May I stream from my I-Pad through the AirPort Express to
my computer which is connected to my Television? If so with what configuration?
Thank you, I look forward to a response.

Mac OS X 10.5.8 does not support Airplay, which is the feature that allows streaming to the TV. Airplay requires 10.8.   Since 10.8 is so different, you'll have to read this tip, before you involve your computer in Airplay:
https://discussions.apple.com/docs/DOC-6271
Your iPad should be able to AirPlay directly to an AppleTV that is connecte to the TV.   Mind you this will only work for those Apps that are AirPlay enabled like the original Youtube App.
Also 10.5.8 can't sync with iOS 6 or later.   Upgrading to 10.6 or later requires an Intel Mac. G5 and G4 Macs are not compatible with it.

Similar Messages

I have two airport express base stations that I want to configure on two separate sets of speakers in two separate rooms. How do I do this? Airport Utility only seems to scan one express at a time.

I am currently running a PowerPC G5 imac and have a wired broadband modem via ethernet with airport wireless network turned on, on the G5. I have the computer in the bedroom and have an airport express wired into a mixer that connects to my stereo. I have recently bought another airport express base station to connect to a pair of active monitors in the kitchen. When I try to scan these on Airport Utility version 5.42 I am only managing to scan one base unit at a time. I have plugged them in separately and reset them, they both have firmware updates, however the utility will only read one at once. I have read that you can link base stations to the same WDS. I would like to know how to go about doing this if it will only scan one airport express at a time. I have looked it up on the net and not found anything that is a simple fix. Can anyone help? In Apple Support it says that multiple Base Stations can be used. I would like to get both Apple Airport Express units to be able play airtunes separately or at the same time depending where I am in my flat. I do not need different music in each room. I would like to stream music from the computer to multiple rooms in the flat without having to continually unplug and configure the Base Stations. Has anyone come across such a challenge? Any help would be welcome.

How do I configure the AX to connect to the hub's wireless network? It will only scan one base station Airport Express at a time in the Airport Utility. I think what I am trying to do is use the hub as a router to the two AX's. Is there a specific way to set this up?
To set up the AX to join a wireless network as a "Wireless Client," using the AirPort Utility, either connect to the AX's wireless network or temporarily connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, try these settings:
Launch the AirPort Utility.
Select the AX.
If not already connected to the AX's wireless network, go ahead and switch to it when prompted.
AirPort Utility > Select the AX > Manual Setup > AirPort > Wireless
Wireless Mode: Join a wireless network
Network Name: <type in the network name/SSID of the wireless network that you want to join or select it from the pop-up menu>
Wireless Security: None OR, if you are using security on your wireless network:
Wireless Security: <Select the appropriate level of security for the existing wireless network: WPA/WPA2 Personal | WPA2 Personal>
Password: <enter your wireless network security password>
Verify Password: <re-enter the same security password>
Click Update to write the new settings to the AX.

I have an AirPort Express, iPhone 5, and MacBook (late 2010). How do I see the graphical overview of my network?

I have an AirPort Express, iPhone 5, and MacBook (late 2010). How do I see the graphical overview of my network? (I can't seem to find a way to see it).
My computer is acting....well, strange. I can't put my finger on it but it doesn't seem right. Menus look skewed. Some applications look like they're trying to disguise themselves as apple (no consistant window formats). Airplay turns on and off on my devices on it's own. And some locked system preference seem to unlock themselves, or won't even grey-out after I lock them.
I have changed my password many times but the issue keeps coming back. I feel like I'm going crazy - but I know that something just isn't right...maybe someone's been hacking me? (I have no idea why...)
Anyway, maybe I could have stemmed from an improper setup of my wireless network.
Any thoughts?
Also, right now, when I just signed into apple communities....
     I have an iCloud email address that is accociated with my 1 and ONLY Apple ID...
     It seems to have been working but...
     When I loged in here it only saw my:
                              OLD MacBookPro
                              3 Old iPods
                              My new MacMini with OS X Sever (Server is currently turned off)
     Could my Apple ID be confusing my MacBook (which I'm currently using) as an old iPod or my old MacBookPro?
     I doesn't even see my iPad (1st generation), or my iPhone 5
     Also, the Mac App store is giving me the option to download Mountain Lion??? I already have version 10.8.3...
Can anyone perform an analysis on my account and computer? I have been to the Apple Store 6 seperate time and the problem was not resolved (after 6 COMPLETE hard drive wipes).
PLEASE HELP!

i guess you could put the aiport utility app on your iphone, click on the aiport express there, it will show you how many devices are connected to it and the mac addresses of those devices.

I have an airport express and want to know how to set up two different wireless networks. One with 5GHZ and one with 2.4GHZ so different devices can connect to either.

I have an airport express and want to know how to set up two different wireless networks. One with 5GHZ and one with 2.4GHZ so different devices can connect to either. I have an iphone 4 that will not connect to 5ghz.
thank you!

Your AirPort Express is already providing two separate 2.4 GHz and 5 GHz bands, but each band is using the same wireless network name.
This is the default setup for the AirPort Express, which is recommended for most users. The theory here is that devices will automatically connect to the best quality signal based on their capabilities and distance in relation to the AirPort Express.
It is possible to assign a different name to the 5 GHz band, and then "point" devices at that network to connect. Some users swear by this option.....(I am not one of them).... but you might want to give it a try to see how it works for you.
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the AirPort Express
Click Edit in the smaller window that appears
Click the Wireless tab at the top of the next window
Click Wireless Options near the bottom of the next window
Enter a check mark next to 5 GHz Name.....which will automatically add "5 GHz" to the network name....so you can identify it
Click Save, then click Update and wait a full minute for the Express to restart
Now you will need to "point" your 5 GHz capable devices at the 5 GHz network name. 2.4 GHz devices will connect to your "other" network name.

I have an Airport Express that I am trying to use connected by ethernet to my iMac G4 running Mac OS 10.4.11. I need to update the Airport software in order to use security option WPA2 Personal. I currently have Airport software v. 5.6.1.

I have an Airport Express that I am trying to use connected by ethernet to my iMac G4 running Mac OS 10.4.11. I need to update the Airport Express softwart in order to use security option WPA2 Personal to connect to the internet through my Airport Extreme. I currently have Airport Express software version 5.6.1. How can I update this software? (I can connect directly to my Airport Extreme by ethernet and download the update that way). Is a later version of A E software available for download anywhere? Any suggestions would be greatly appreciated.
Thanks.

Download and install AirPort Utility 5.4.2 for Mac OS X 10.4.11 "Tiger" here:
AirPort Utility 5.4.2
Once installed, launch AirPort Utility. It will tell you if a firmware upgrade is available for your Express.

I recently upgraded my OS to Lion 10.7.4. I also just upgraded from a 1st Generation Time Capsule to a 4th Generation Time Capsule. I have an Airport Express (Version A1264) that I formerly used to extend my wireless network. AE no longer works.

I recently upgraded my OS to Lion 10.7.4. I also just upgraded from a 1st Generation Time Capsule to a 4th Generation Time Capsule. I have an Airport Express (Version A1264) that I formerly used to extend my wireless network. Airport Express no longer connects to my network. I have downloaded Airport Utility 5.6 to try and configure, but with no luck.

TC first gen was not simultaneous dual band. So.. it's probably best to factory reset your extreme and then tell it to extend again.

If I already have an Airport Express Base Station, can i hook an external hard drive into it's USB port and use that hard drive with Time Machine?

If I already have an Airport Express Base Station, can i hook an external hard drive into it's USB port and use that hard drive with Time Machine?

No, and that shouldn't be done with an AirPort Extreme or Time Capsule.
(66017)

I have an Airport Express, which flashes amber, but when I go to manual set up, it says there's an error and tells me to close configuration?

I have an Airport Express, which flashes amber, but when I go to manual set up, it says there's an error and tells me to close configuration? Once I complete that, the same thing occurs, and there's another error message?

Is this a new AirPort Express, or one that you have had for some time that has now developed problems?
What function do you want the Express to perform on your network?

ITunes Automatically Change EQ Setting Based On Which Airport Express Streaming? I have two Airport Expresses running at my house. Both are connected to different types of speakers. Neither speaker set has its own equalizer, and both require a different

I have two Airport Expresses running at my house. Both are connected to different types of speakers. Neither speaker set has its own equalizer, and both require a different EQ setting to sound just right. Does anyone know of a way to have iTunes automatically change its EQ setting based on which Airport Express it is streaming to?

I'm in the same boat. I have a 6 zone amplifier running with 6 airport expresses to different rooms inside and outside the house. Each has it's own acoustic characteristics. I'd really love to be able to set each airport to equalize based on my SPL frequency sweep I did for each room.
Setting the eq in itunes won't do it as that is global plus I have many more sources for auiod other than itunes that use the AEs directly.

I have an airport express (802.11n) which download do I need to get it work on Windows 8.1?

I have an airport express (802.11n) which download do I need to get it work on Windows 8.1?

That one doesn't work.
Verstuurd vanaf mijn iPhone
Op 19 nov. 2014 om 13:55 heeft "Apple Support Communities Updates" <[email protected]<mailto:[email protected]>> het volgende geschreven:
http://www.apple.com/support/assets/images/external/emails/logo.gif
You received a reply
Bob Timmons<https://discussions.apple.com/people/Bob+Timmons?ac_cid=op123456> has replied to your question. You can view the full discussion<https://discussions.apple.com/message/27128939?ac_cid=op123456#27128939> in Apple Support Communities.
I have an airport express (802.11n) which download do I need to get it work on Windows 8.1?<https://discussions.apple.com/message/27128939?ac_cid=op123456#27128939>
It has been some time since Apple updated AirPort Utility for Windows. The current version is 5.6.1.
It runs on Windows 7, but I have not checked on Windows 8.
AirPort Utility 5.6.1 for Windows<http://support.apple.com/kb/dl1547>
Correct Answer <https://discussions.apple.com/email/thread/6679920/correct/27128939> Helpful Answer <https://discussions.apple.com/email/thread/6679920/helpful/27128939>
Use the buttons above to tell Bob Timmons and the rest of the community if this reply solved your question or helped you get closer to finding a solution.
To reply to Bob Timmons, go to the discussion<https://discussions.apple.com/message/27128939?ac_cid=op123456#27128939> in Apple Support Communities.
You are receiving this email from Apple Support Communities. You can change your email preferences in your Apple Support Communities Profile<https://discussions.apple.com/user-preferences!input.jspa>.
TM and copyright © 2014 Apple Inc. 1 Infinite Loop, MS 96-DM. Cupertino, CA 95014.
All Rights Reserved<http://www.apple.com/legal/> | Privacy Policy<http://www.apple.com/legal/privacy/> | Terms of Use<https://discussions.apple.com/docs/DOC-5952> | Apple Support<http://www.apple.com/support/>

I have installed airport express and it lights steady green. But when I use the airport tool, nothing can be found.

I have installed airport express on my Window 7 and had problem to find the airport express.
I solved the problem by turning off my AVG firewall and the airport tool found the airport express and it went steady green.
I then turned on the AVG firewall again and it continues ok.
But when I turn off and restarted my laptop I have to follow the same procedure.
The AVG firewall is set to All Allowed for the airport express.
Is there anybody out there that can give assistance to solve this problem?

Hi,
I solved the problem myself by updating the Wi-fi driver.
Now it works perfect.

Have installed Airport express using windows vista, unit blinks green, selected the speakers from itunes but get no sound at all, even if I put a headphone in the airport express. Pls advise

Have installed Airport express using windows vista, unit blinks green, selected the speakers from itunes but get no sound at all, even if I put a headphone in the airport express. Pls advise

If the AX is working properly, it should not show up in your list of available networks (since it is "joined" to your router). Have you unplugged and replugged your AX? Unplugged and, after a minute, replugged your router? Do you have MAC address filtering enabled on your router? (if so, disable it to see if the AX works ... it will broadcast its MAC address to the router, and you can add it.) Is your firewall turned on? Turn it off and see if you can access Airtunes. You will have to open a port in your firewall if that is the case.
The AX should have the same network name as your router the wireless tab. When it shows up, what name is it broadcasting?

I have 3 airport express units, an Ipod and a PC. I used the PC to set up an airTunes and the AirUtility can see all three of the airexpresses. The Ipod displays all of the airexpresses and I can pick any one to stream music to. PC won't - any ideas?

I have 3 airport express units, an Ipod and a Windows 7 PC. I used the PC to set up an iTunes/airTunes and the AirUtility can see all three of the expresses. The Ipod displays all of the expresses and I can pick any one to stream music to. The PC won't - any ideas? AirUtility tells me the 7.5.2 version of the firmware is the latest for the expresses and ITunes is also reporting that there are no upgrades available. I get an error code -15000 when I try to connect from the PC to one of the expresses.

How do I configure the AX to connect to the hub's wireless network? It will only scan one base station Airport Express at a time in the Airport Utility. I think what I am trying to do is use the hub as a router to the two AX's. Is there a specific way to set this up?
To set up the AX to join a wireless network as a "Wireless Client," using the AirPort Utility, either connect to the AX's wireless network or temporarily connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, try these settings:
Launch the AirPort Utility.
Select the AX.
If not already connected to the AX's wireless network, go ahead and switch to it when prompted.
AirPort Utility > Select the AX > Manual Setup > AirPort > Wireless
Wireless Mode: Join a wireless network
Network Name: <type in the network name/SSID of the wireless network that you want to join or select it from the pop-up menu>
Wireless Security: None OR, if you are using security on your wireless network:
Wireless Security: <Select the appropriate level of security for the existing wireless network: WPA/WPA2 Personal | WPA2 Personal>
Password: <enter your wireless network security password>
Verify Password: <re-enter the same security password>
Click Update to write the new settings to the AX.

I have the airport express as router can I buy the new airport express and use my old airport to extend my net?

I have the airport express as router can I buy the new airport express and extend my net?

Things can get confusing pretty quickly since there are 3 different versions of the AirPort Express.
If by "old", you mean you have Model No A1084 or A1088 AirPort Express (look at the label on the side of the device for the Model No), it cannot be used with the "Extend a wireless network" feature of other newer Apple routers.
If your AirPort Extreme is "square" shaped with rounded corners, then the "old" AirPort Express will not work with your AirPort Extreme using the "Extend a wireless network" settings.
You could use a "previous version" AirPort Express, Model No A1264 to "Extend", or the "new" AirPort Express, Model No A1392, for that purpose.
If your AirPort Extreme is a simultaneous dual band product, then the "new" Express would be able to "extend" both bands. The "previous" AirPort Express (Model A1264) would be able to extend only one band, since it is not a dual band device.

I have the airport express and trying to connect to the internet on my Vizio and can't find a code to put in to connect..

I have the airport express and trying to set up internet service on my TV (Vizio) but having no luck.... I need a code to enter in order to connect! Can you help?

Hi - you might be getting full bars but a slow connection - games can be very sensitive to this - have you tried connecting via ethernet to see if it is better? - however if your wireless speed is good too then it could be a ps3 issue and a call to their support might help - otherwise there could be interference issues, radio channel conflicts, etc. - without knowing the specific aspects of your entire network environment it is hard to make any more suggestions.

I have an Airport Express connected via optical toslink to a dac/amp in turn connected to speakers. When using iTunes I get message "no speakers connected to Airport Express" and audio sound has drop outs.

I have an Airport Express connected via optical toslink to a dac/amp in turn connected to speakers. When using iTunes I get message "no speakers connected to Airport Express" and audio sound has drop outs.

Ok, if you are connecting the AirPort Express Base Station (AX) to the existing wireless network, then the DSL in the next room is most likely a combination DSL modem and wireless router. Thanks for clarifying that for me.
Although they may only be separated by a single wall, the building material used in that wall may be enough to prevent the AX from receving a "good" signal from the DSL router.
Since I don't know what computing equipment you have available, please check out this AirPort User Tip: AirPort - Optimal Base Station Placement to see if you can get some SNR measurements at the location of your AX. To do this properly, you will want to power-off the AX and only get these measurements for the DSL router.

I have a airport express, M

Similar Messages

Maybe you are looking for