I have a airport extreme as my base station. I am experiencing a large signal loss in a particular room. Will an airport express restore that signal? l

I have an airport extreme base station. Experiencing large signal loss in a particular room. Will an airport express, placed in that room, restore the signal? Thanks, Glenn.

The Express can only "extend" the bandwidth of the wireless signal that it receives.
So, you would not want to place the Express in the same room where you need more signal, you would want to locate the Express approximately half way between the AirPort Extreme and the area that needs more wireless coverage.

Similar Messages

Airport Extreme Dual-Band Base Station Is excessively slow

Let me start off by stating this is my first apple support discussion and I have no experience in these forums but rather forums elsewhere.
My Airport Extreme Dual-Band Base Station is completely updated as of DEC. 30, 2012 running version 7.6.1 and I have the latest airport utility, so bare in mind some of the previous fixes I've Read seem unavailable to my setup
Our household has 7-13 of the following devices connected in a 24 hour average:
5-6 iPhones all running iOS 6 (1, iphone 3gs; 2-3, iPhone 4; 2, iPhone 5)
1 iPad 2 wifi only running iOS 6
2 MacBook Pro 13" early 2012 models one running mountain lion and the other running lion
1 mac mini early 2011 model running mountain lion server and is connected outside the network as a public server
1 Apple TV latest model(1080p) latest updates
1 LG 47" 1080p 3D TV
3 blueray players
2 Windows 7 PC one a laptop and the other a desktop
1 HP All-In-One Printer
1 AT&T MyCell Antenna
My problem is as follows:
My network is running rather sluggish. the base station is getting at the very minimum good signal strength to all my devices most of them getting great signal, so I doubt it be the result of range. I've tried messing with the channels and radio settings but have yet to find a correct optimal settings. I've tried searching around these forums as well as in other areas and have not found a suitable solution. my apple TV lags and jitters a lot. I have trouble airplay to it because of what I've read elsewhere which is latency issues. I have no clue how to test latency. I have realized that it isn't a matter of noise in the area because noise doesn't pass 15% and signal is optimal in all areas. of where the devices are. I've noticed connecting my server directly gives me 47Mb/s as compared to the Ethernet connection of 32Mb/s so I am clueless as to a solution. I know that with my old router the wifi speeds were outstanding but that router kept disconnecting wifi clients and then reconnecting them. sadly this is happening again with the apple router. last night my iPad would not stay connected and our network had so much lag that I couldn't even load the youtube app let alone a video. also buffering takes an odd amount of time sometimes 3 minutes. for a 30 second video on youtube. I have no guest network active and I have a wpa2/wpa personal encryption set on the network. I could use some serious help. the people of my household have no problem returning the apple router but I think to urge otherwise. if I could get some help in a solution that would be fantastic.
Thanks in Advance,
Blaine Miller

Can you tell us whether your "modem" is a simple device with only one ethernet port or is it a "gateway", which is a combination modem/router with 3-4 ethernet ports?

Is my AirPort Extreme (802.11n) Base Station defective?

I'm trying to set up a wireless network with my new AirPort Extreme (802.11n) Base Station. I dismanteld my existing network that consisted of an old model AirPort Extreme and an AirPort Express. I can't seem to get anything to work properly with the new hardware. I have a G4 Quicksilver that uses an AirPort card. Is that the issue? I thought they were compatible. I was not able to update the Setup Utility because I don't have an Intel Mac. Still, that shouldn't prevent me from doing an initial setup. I'm thinking perhaps the unit is defective. I've been working on this several hours a day for almost a week. This is the most trouble (by far) that I've ever had with any Apple product. I'm really disappointed. I suspect the hardware is defective, but based on all of the issues I've read about in this forum, I think it could just be reflective of the poor overall quality of the new AirPort Extreme. What a let down.

What is the exact name of the application you are using to configure the airport?
You should be using "AirPort Utility"
It is a Universal application, so it should work on both a PPC and Intel mac.
As for the update, if you can't download it via software update, you most likely do not need it.
The quicksilver only has an Airport card:
http://support.apple.com/specs/powermac/PowerMac_G4_Quicksilver2002.html
That means that you will need to configure the airport extreme N to operate in the 2.4 GHz range. You will need to tell it that it needs to be compatible with 802.11b
There is probably an option for 802.11 b/g/n compatibility.
Are you going to still use your airport express? you could either use WDS to extend your wireless network without connecting the two airport base stations with an ethernet cable... or you could connect them together with an ethernet cable and configure the same network name and use two different channels (only use 1, 6, or 11). If you extend a network, they both need to use the same channel.
If the quicksilver is the only machine on your network, it will not be any faster.
Actually, you could make things faster, now that I think about it... I am guessing that your quicksilver is not located near your airport extreme. If I am wrong, just ignore this...
You could use one of your airports as your main base station, connected to your cable modem/dsl whatever... then you connect the other airports ethernet to your quicksilver. you then turn off the airport card in your quicksilver and set up the airport connected to your computer to use WDS and connect to the other airport using 802.11g.
You now have gone from an 11 mbps max (5 mbps real world) connection to a real world 30-40 mbps link.
Other options would be to look for 802.11g or 802.11n usb adapters for the quicksilver... I am not sure what is mac compatible out there, since it is probably a small market since it is built in to all new macs.
Good luck

Airport Extreme 802.11n Base Station blocking RealPlayer 11 completely

I am trying to play this radio station (just a brasillian sports channel) on RealPlayer 11:
rtsp://real.rbsonline.com.br/liverbs/*/broadcast/rdgaucha/gaucha.rm
Which is completely blocked on my Airport Extreme 802.11n Base Station with the latest firmware update.
It even blocks when RealPlayer is configured for HTTP only.
I am using it on my iMac which is connected directly via a ethernet cable instead of wifi to the Airport Extreme 802.11n Base Station.
RealPlayer can play it fine when I plug my iMac directly to the cable modem so it proves is the router. I never had RealPlayer issues before when I was using a linksys router.
It does really feel like Apple put an intentional block on RealPlayer to stop competition.
Anyone seen this issue? Guess it is related with the BBC RealPlayer issue.

Fixed myself, problem was because I setup OpenDNS on base station, removed it now works

TS4597 I am using an Airport Extreme as my base station and I want to extend its range using a recently purchased AirPort Express. However neither device is showing up on my AirPort Utility on either my older MacBook Pro or my IPad 4. What do I do?

I am using an older AirPort Extreme as my base station and I want to extend the range by using a recently purchased AirPort Express. When I try to find either device using the AirPort Utilities function on either my new IPad 4 or my older MacBook Pro neither device is detected. However the utility is seeing that we are connected to the Internet which is through the Extreme. What am I doing wrong?

For now, leave the AirPort Express powered off.
Power off the entire network....all devices.....in any order that you want
Wait a few minutes
Power up the modem first, and let it run 2-3 minutes by itself
Power up the AirPort Extreme next, and let it run a full minute
Keep powering up devices one at a time about a minute apart until everything is powered up (leave the Express off for now)
Open AirPort Utility and check to see if the AirPort Extreme is visible.
If it's not, click the AirPort Utility menu at the upper left of the screen, then click About AirPort Utility. Post back with the version number of AirPort Utility that you see there....which should be AirPort Utility 5.6.1.
Post back on your progress.

Airport Extreme 802.11g base station loses internet connection often

I just installed an Airport Extreme base station (802.11g version Apple Base Station V5.7) last week. And it keeps dropping my internet connection at least once a day.
I simply replaced an old SMC Barricade wireless router that died (and was a POS). But I only had to reset the SMC about once every 2 months. Nothing else has changed in my setup. Only the router/base station is different.
The wireless part is fine. Even when the internet connection gets dropped the hard wired AND wireless clients can still access the local network. Reseting the DSL modem has no effect. The only solution is to power cycle (unplug and plug back in) the AEBS OR restart it from Airport Admin utility.
But you can't do that from offsite. When the AEBS drops the internet connection I can't access my office network from home!
Is there a place in Airport Admin Utility which tells you the status of your internet connection like most generic wireless routers with web-based software do?
Any ideas on resolving this?
Thanks

"Any ideas on resolving this?"
Looter,
Based on your description, open AirPort Admin Utility and check the configuration of your main base station on the "Internet" pane. If you're using ethernet cable from the modem to the base station, the top selector [Connect Using:] should show "Ethernet" and the second selector [Configure:] should show "Using DHCP"
Also, check your iMac's System Preferences>Network at "Show: AirPort" and check the PPPoE pane which should show no entries (unless your isp requires its use), and the TCP/IP pane which should show "Configure IPv4:" as being "Using DHCP" - while all other info is filled in automatically.
"Is there a place in Airport Admin Utility which tells you the status of your internet connection like most generic wireless routers with web-based software do?"
No, the AirPort Admin Utility is not web-based, only located on your computer with the information available to it necessary to operate the AirPort system. It does not actually administer the signal. I think that is done only by System Preferences>Network.
"I'm actually referring to the Airport Express base station not my MacBook Pro's wireless connection. Is there anywhere in the Airport Admin Utility software that tells you the status of the AEBS' internet connection NOT the wireless connection."
No, that info is not available in that utility. The information you seek is at System Preferences>Network, but only after the system scans for it. Click the "Assist me..." button and then, on the "Do you need assistance setting up a new network connection or solving a network problem?" panel that opens, click the "Diagnostics..." button. A "Network Diagnostics" panel will then open and if its scan shows there is no internet the lights to the left of "Internet" and "Server" will be yellow instead of green. Meanwhile, it continues scanning for the connection until it is re-established. I determined this by pulling my cable from the phone jack, later reinserting it.
Further information that may be helpful to you can undoubtedly be found in threads such as this other one:
http://discussions.apple.com/thread.jspa?threadID=884049&tstart=0
edit-
In re-reading, I may not have given you what you need. It sounds as if you may be "timing out" somehow on your connection. You might want to check around at some of your log-on settings to see if there is that possibility connected to one of them, even though the only thing I can think of is the "Renew DHCP Lease" button which is unknown to me, as I've never used it.
Message was edited by: myhighway

Airport Extreme as rempte base station with Netgear DG834N as Main Station

Does anyone know if it is possible to set up an Airport Extreme base station as a remote base station with a Netgear DG834N as its main base station. i.e. the Netgear is connected to the internet and I want to set up my AP as a remote unit to extend the wireless connectivity.

That is not possible. The Netgear device is not compatible with Apple's WDS.

I have an airport extreme and express, if I use the extreme as a base station connected to my old router can I use the express to extend the signal while also creating a new network that only I can use?

I have an airport extreme and express, if I use the extreme as a base station connected to my old router can I use the express to extend the signal while also creating a new network that only I can use? Essentially having two wifi connection off the same network? If so how do I set this up?

Extending using a wireless connection always results in a performance compromise.
If the Express is going to extend using a wireless connection, then the Express will need to be located about half way between the AirPort Extreme and the general area where you need more wireless coverage. The more that you have line-of-sight between the Extreme and Express, the better the network will operate.
Remember......the Express can only "extend" the quality and signal speed that it receives, so it needs to be located where it can get a very good signal from the Extreme. Although Apple cleverly uses the term "extend", a more accurate term for the Express would be "repeater".
If the Express will extend by connecting to the Extreme using a permanent, wired Ethernet cable connection......highly recommended for best performance.....then the Express can be located exactly where you need more wireless coverage. There is no signal loss at all through the Ethernet cable, so the Express gets a full speed signal no matter where it might be located.
Post back to let us know which way to you want to go.

HT1218 After a recent iTunes update attempt iTunes no longer functions and the airport extreme base station is not accessable on our computer. We still have wifi but cannot access the base station software.

After a recent iTunes update attempt iTunes no longer functions and the airport extreme base station is not accessable on our computer. We still have wifi but cannot access the base station software.

Thanks for the reply. I appreciate the response. I tried that approach this evening and it didn't work for me. (Technically it worked for me, when I was hardwired into my base station, but would not work for me wirelessly, which is my main issue.)
Again, using the approach you recommended works only if I have my ethernet cable attached to the LAN port so my computer is communicating directly to the base station through the hard wire. I am able to scan for my base station and make setting adjustments normally this way too.
As soon as I disconnect from the LAN port and try to go wireless is where I run into problems. The Base Station's wireless network I created is available to choose in the top right corner of the monitor with all of the other available wireless devices/networks -- but the network I created does not have access to the internet. I am also unable to configure my Base Station wirelessly. When my Airport Utility tries to scan for the Base Station and Network, it cannot find any Apple Wireless Device. It's like the Wireless Network in my base station is not sending out a signal.
Is there a way to resolve this issue?

I have an 2tb time capsule 802.11n Wi-Fi base station can I use this as an external hard drive and use a new airport extreme 802.11ac Wi-Fi for my wifi?

I have an 2tb time capsule 802.11n Wi-Fi base station can I use this as an external hard drive and use a new airport extreme 802.11ac Wi-Fi for my wifi?

You can use the 2 TB Time Capsule as a network drive. That means that it must connect to one of the Ethernet LAN <--> ports on the new AirPort Extreme, or connect to the network using wireless.

I have airport extreme as my base, how do I use linksys as the extender

I have airport extreme as my base, how do I use linksys as the extender

You would need to connect the Linksys to the AirPort Extreme Base Station (AEBS) by Ethernet, and then, configure both of them for a roaming network.

I have Airport Extreme as the base unit and an Express unit in a room separated by a brick wall to improve signal. Express shows a green light indicating signal but my iPad does not perform well. How can I improve other than hardwire ethernet connection?

I have Airport Extreme as the base unit and an Express unit in a room separated by a brick wall to improve signal. Express shows a green light indicating signal but my iPad does not perform well. How can I improve other than hardwire ethernet connection?

Other suggestions, and more info about the nature of the problem, may be in this Apple tech note.
http://support.apple.com/kb/HT1365
For example, you might find that the brick wall is not the only problem. There may be other devices pumping out enough wireless interference to be making things even worse.
I agree with Bob Timmons that Ethernet is best and most reliable. And that powerline (which I use) is easier and potentially faster than wireless...but only if your power lines do not have electrical devices plugged in which produce electrical noise on the line. Powerline will be slower than Gigabit Ethernet.
Ethernet cable is the only way to ensure that the signal goes directly there in a shielded way for a clear fast signal. Wireless and powerline are much slower because of all the other things the signal has to fight past to get to the other device.

I have already installed airport Xtreme as a base station and airport xpress as amplifier of signal. problem is I couldnt make them talk. Extreme is working properly and Xpress is flashing ambar.

i have already installed airport Xtreme as a base station and airport xpress as amplifier of signal. problem is I couldnt make them talk. Extreme is working properly and Xpress is flashing ambar.

Please describe whether your two AirPort base stations are both 802.11n-capable. Also describe how you configured them. Did you configure the AirPort Extreme to "allow this network to be extended"? Did you configure the AirPort Express to "extend a wireless network"?

I just purchased an extreme. I have an express. The sales guy recommended setting up a hot spot with the express and use the extreme as a base station. What does he mean and how do I do this? What are the advantages?

I just purchased an extreme. I have an express. The sales guy recommended setting up a hot spot with the express and use the extreme as a base station. What does he mean and how do I do this? What are the advantages? How do I set this up?????

I think he means to set up the main extreme as the main router or "main base station", and then use the express to "extend" the network.
You can look up the manual for your express here for more details:
http://support.apple.com/manuals/
Extend the range of your network by adding AirPort Express to your existing AirPortExtreme or AirPort Express wireless network (this is called a Wireless DistributionSystem, or WDS). "
Extending the Range of an Existing AirPort Extreme or
AirPort Express Network
You can extend the range of an existing AirPort Extreme or AirPort Express wirelessnetwork by setting it up in a WDS. Wireless computers can connect to the network andshare the Internet connection, share files, and play network games. If you connect yourAirPort Express to your home stereo, computers on your wireless network can useAirTunes to play music on the stereo from iTunes. If you connect a USB printer to yourAirPort Express, all of the computers on the network can print to it.
n Open the AirPort Setup Assistant on a Macintosh, or the AirPort Express Assistant on acomputer using Windows XP. Follow the onscreen instructions to extend the range ofyour AirPort Extreme or AirPort Express network.
Note: Extending the range of a network using WDS may reduce overall networkperformance.

Notice Re: New Airport Extreme 802.11n Base

About an hour ago, I got off the phone with Apple Support. They were very helpful in getting "phase one" of my installation going. But in the process WE both discovered that the new Airport Extreme Base Station (802.11n) I had bought from the Apple Store nearby contained: OLD versions of setup software and pdf manuals!
I could not proceed to the final step (as we intended while on the phone) because I had just installed "v. 4.2" of the software and of course version 5 is needed.
Checking the pdf manuals - I could plainly see the OLD "flying saucer" model base was being depicted and the instructions were for that model. It was "funny" because the Apple Support person asked a couple of times, "Is the base you have a square about 1-inch thick?"
Of course, Support will send out word that there are some (who knows how many at this point) Airport Extreme Base Stations in stores (even Apple Stores) with obsolete software and documentation.
I just thought I'd post this for those who have not yet bought an AE Base Station - be sure to check this before buying.
My consequence are less happy: It's now Friday Aug. 31: It will take 5 business days for the replacement disk to arrive, next Monday is a US Holiday, which means I won't be able to complete my setup until week after next.

Thanks Rajesh, I may do that but it seems a shame now that the Apple Support lady is sending me a copy. I think instead, I may call the local store and ask if they know of the problem, first.
Because this Apple Store opened only about 5 weeks ago, I suspect this may be "new stock" which indicates that's all they'll have. Also, Apple Support said they'd notify the right parties - by which I think they mean their own and independent Apple retailers.
Anyway, I wasn't posting the info as a question: I wanted to notifiy those who may be about to buy Airport Extreme for themselves. I did some checking before posting here and found no other notices of this problem. So I guess I've got a "scoop" and wanted to be first in spreading the news.
I left out a good part of the whole story in my orignal post: what got me to Apple Support was that just connecting the base station (with ethernet cable) to computer knocked out my DSL service. I first called my ISP tech support and got that fixed. But such an easy procedure "backfiring" like that got me thinking, so I then went to Apple Support via phone. Only then did we discover I had the old version of the software. My "phase two" is just getting an eMac in the next room connected wirelessly - no big deal - so I may wait for that complimentary disk after all.
One possibly related item: After I finished talking to Apple Support, almost at once, Mail.app went down. It turned out - the mail .plist had gotten corrupted. I trashed that and Mail came back -but then I had trouble connecting to the mail server and had to re-do password and so-on. Right now, I'm "back to normal" but suspect that installing the old Airport software (a second time) is what kicked Mail to it's knees. Sure was a heckuva coincidence if it wasn't that, I've never - never had trouble with any version of Mail.app until now.
Message was edited by: macnoel

I have a airport extreme as my base station. I am experiencing a large signal loss in a particular room. Will an airport express restore that signal? l

Similar Messages

Maybe you are looking for