I have a AirPort Extreme Base Station with Gigabit Ethernet 802.11n ?

I have the 802.11n Airport Extreme Base it went bad so Apple Sent me a new one to put into my
office where I have a iMac 24" 2.4ghz with really fast internet
I also HAD a AirPort Express Base Station with 802.11g and AirTunes G not N so when I received the
new 802.11n Airport Extreme I sold the Airport Express 802.11g now my Macbook Pro 17" 2.33mhz
which is in my family room and that is also where the Airport Express with iTunes was located
now my internet is like really slow on the MBP 17" I have 5 bars in the pizza menu bar but my
internet speed is really BAD on the MBP 17" and I have 16mg speed on the net
+BIG ? DO I NEED TO BUY A 802.11n AirPort Express Base Station with 802.11n and AirTunes??????+
TO EXTEND THE RANGE OF MY AirPort Extreme Base Station with Gigabit Ethernet Which is in my
Office where my iMac 24" 2.4ghz is located and the internet zooms on the iMac but not my
my Macbook Pro 17"
Please help as I don't want to spend money on another 802.11n if it will not extend
I
Message was edited by: macman60

So you agree to the lose of the Airport Express removal has caused me to lose enough of a signal to make the Internet...
Sorry but I'm not sure what this long run-on sentence is trying to say.
You asked if the network could be wirelessly extended and that is what I replied to.

Similar Messages

Printer and AirPort Extreme Base Station with Gigabit Ethernet

Hello!
I own a macbook, one windows xp pc, and two windows vista notebooks. I bought a airport extreme base station. I set it up with my macbook at first and I do a print and it works. I do the same with the others. I install the printers drives to all notebooks. Then tried to print and only one of them worked. They all have bonjour download for windows. So i restarted all the pc's and mac and tried to print and never prints. On the pc's i get a error message. On the mac i get an its busy and never prints. All of them connect to the internet, but no printing. I have the printer connected to the base station. I did two prints and then I couldnt print after that. Internet works. Please i need some help to fix this. Thanks in advance

Hi
Maybe you already have fixed your printing problem. I'm no expert but I sometimes have had printing problems and I feel for you. However, first of all. What sort of printer do you have? It sounds to me that one of the pc printing documents got stuck somewhere on its way to the printer and now it is taking up space on the network (figuratively speaking ofcourse). I can recall something happening to my network/printer some years ago. Unfortunately I can not remember what I did to fix the problem but if I were you I would do the following: First I would disconnect the pc from the network and then try to reset the printer clearing its print memory. Then I would try to get the mac to print again. If succesfull I would take the mac off the network and connect one of the pc's and get that to print. If I succeded I would repeat the procedure with the other pc's. If I wasn't succesfull I would clear the memory again and then try with one of the other pc's. But I would only try one computer at the time to try to isolate the problem. Maybe you have already tried this and since pc's are a mystery to me I dont't know how to help you in that department. However using bonjour on the pc's I would not expect to have problems (though I use Windowc XP print menu on my vertual pc - works fine).
Hope that you will solve your problem soon.
Berit

I have an Airport Extreme Base Station and have recently upgraded to Mountain Lion. Now airport utility won't work with my base station so I bought a Time Capsule. For the life of me I can't make the substitution work and only see a blinking amber light.

I have an Airport Extreme Base Station and have recently upgraded to Mountain Lion. Now airport utility won't work with my base station so I bought a Time Capsule. For the life of me I can't make the substitution work and only see a blinking amber light. Can anyone who has made this change offer some advice?

apikoros wrote:
The Utility transferred all of the AE's settings, so I still have to change the password, which leaves me with only 2 other questions, I think:
1) I assume it's just a matter of using the Utility, entering a stronger password and checking for it to be remembered in Keychain Access. But do I have to change the password for each individual unit-- the TC, the Extreme and both Expresses-- or will changing it just for the TC alone work for the entire network?
Resetting the password you will need to do for each device... the utility cannot even see those old units.
So you will have to do it for each one.. think it through.. because as you change passwords the others will lose connection.. so start from the express which are wireless extending .. change those first.. and go back up the chain.. as each one changes it will drop off the network.. until you reach extreme and change that. Then you might need to reboot the whole network to get everything talking again. If something goes wrong.. just pluck that one out of the mix and plug in ethernet.. reset and redo the setup. That is my preferred method anyway.. do everything in isolation one by one. By ethernet and then nothing goes wrong.
2) Who's the treasonous SOB who spilled the beans to you about the ICBM in my back yard?!?
N.Korean hackers.
[Edit] Whoops-- one more question: I want to partition the TC's disk, but Disk Utility doesn't see it. What do I need to do?
You cannot partition a network disk. And apple provided no tools for it in the TC itself. You can pull the disk out and partition it but that voids your warranty. (although done with care who is to know).
Look at Q3 here.
http://pondini.org/TM/Time_Capsule.html
Mixing TM and data on the TC is worth planning carefully. They don't necessarily sit happily together.

Have 2 airport extreme base stations connected in chain. Airport utility shows slave unit without power. However, power is on slave unit, but status lights do not show up at all. Small green lights at each back port blink. Anyone have any ideas?

Have 2 airport extreme base stations connected in chain. Airport utility shows slave unit without power. However, power is on slave unit, but status lights do not show up at all. Small green lights at each back port blink. Anyone have any ideas?

Unfortunately, you are describing the symptoms of an AirPort Extreme with a failing (or failed) internal power supply.
As a last resort, try a Factory Default Reset on the AirPort Extreme as follows:
Power off the AirPort by pulling the power cord
Wait a minute or two
Hold in the reset button first, and keep holding it in for an additional 8-10 seconds while you simultaneously plug the power back into the AirPort
Release the reset button and allow a full minute for the AirPort to restart
Now try to configure the AirPort again. If you continue to see the same symptoms as before, the AirPort will need to be replaced.

Hi I have an airport extreme base station And trying to dial on windows

Ok I have a airport extreme base station the one with dial-up modem and power over ethernet. Well i have people PC as my provider, and can dial the connection on my macbook by using internet connect. but on my hp i can not. I have tried to create a connection type on it and cant figure out how to have it connect like on internet connect. tho i can go the admin utility and click automatically connect and click OK and it dials the connection to disconnect i re click it and click OK and it disconnects but i do not like it that way. So what am i to do and is their a internet connect app for windows. I have also contacted apple and hp and that did not help. Feedback welcome and is needed.
Thanks to all that leave feedback

If you are using dial-up.
Jon Sevy has a Java Utility for this purpose.
You will need Java in order to run the utility
http://www.java.com

Trying to connect a NetGear Wifi Range Extender to my existing Wifi. I have an Airport Extreme Base Station and I am also connected to a Vonage Phone Router. Any help would be appreciated?

I am trying to connect a NetGear Wifi Range Extender to my existing Wifi. I have an Airport Extreme Base Station and I am also connected to a Vonage Phone Router. Any help would be appreciated?
The Apple update Firmware for my Airport Extreme Base Station does not update for some reason? Help?
Additionally, I have an older version Airport Express that does not update with the newer Airport Utility Version 6.3 and asks me to download 5.6 to update? Is this worth it?
Thanks

The netgear is not going to work very well.. and not at all unless it is universal wireless extender.. you cannot use WDS method.
If it does support universal wireless then make sure the airport uses a rational SMB compatible wireless name.. not an apple name which is 35 characters long with spaces and illegal characters like apostrophe.
So nice AE name.. AEwifi and actually while you are trying.. fruitlessly to do this.. use AE24ghz and AE5ghz (so different names on the different bands)
Assuming your AE is gen3 or greater.
You should also fix the wireless channel at least for 2.4ghz since the netgear is probably only going to repeat 2.4ghz so use channel 11, as a trial.
And use no wireless security as a test.. if that works.. then use WPA1 & 2.. as often old equipment using WPA2 is not compatible.
If it fails with simple name.. fixed channel and no security. Sorry it is not compatible at all.. it happens.
If your AE is G wireless or earlier model.. really the time has come for replacement.
If your Express is G wireless model it is not supported.. and is too old to bother with expect I guess if you want to run audio to a speaker.
You must use older 5.6 utility to do this.. so do you have a computer running older OS.. up to Mountain Lion it is easy to install with a bit of manipulation.. later is much harder .. or windows computer anywhere or available to you.

How can I set up the airport extreme base station with windows computer

how can I set up the airport extreme base station with windows computer

Hi - you need Airport Utility version 5.6.1 for Windows 7 - go to http://support.apple.com/kb/HT1547 to download it to your computer - the setup depends on what kind of modem you have and if you have another router connected - post back with this info to proceed - thanks

HT4145 I have an Airport Extreme bas station now and I want to know if I can use an Airport Express to extend my network or do I have to use another Airport Extreme base.

I have an Airport Extreme Base Station now and I would like to know if I can use an Airport Express to extend my wifi network or do I have to use another Airport Extreme Base Station.

This AirPort Express:
http://www.apple.com/airportexpress/
It is the only Express with 2 Ethernet ports. All others are "old"
Apple does not specify a model number in their product information, but it is A1392 in the U.S. I do not know if Apple uses different model numbers in other countries.

New AirPort Extreme Base Station with OS X 10.3.9?

I have an iMac running 10.3.9 along with a XP box. Can I use the new AirPort Extreme Base Station with this setup. The sys reqs seem to say that I need OS X 10.4.8. I want to use this new wireless base station with AppleTV.
I really don't want to upgrade to 10.4.x especially since Leopard (10.5) is supposed to be coming out soon. Of course this supposes I can even run Leopard on my non-intel iMac.

I have an iMac running 10.3.9 along with a XP box.
Can I use the new AirPort Extreme Base Station with
this setup. The sys reqs seem to say that I need OS X
10.4.8. I want to use this new wireless base station
with AppleTV.
In order to connect to the new Airport Extreme Base Station 10.3.9 will be fine.
In order to use Apple TV then you will need to be running 10.4.8
I really don't want to upgrade to 10.4.x especially
since Leopard (10.5) is supposed to be coming out
soon. Of course this supposes I can even run Leopard
on my non-intel iMac.
You will be able to run 10.5 on non-Intel Macs.

I have an airport extreme base station and have no clue how to set up a private wireless network instead ton open one i have now.

I have an airport extreme base station and have no clue how to change to a pawword type network from the network i have now that is free to the neighbor hood.

Which version of the AirPort Utility are you using?

AirPort Extreme Base Station with Modem not recognized by airport utililty,

My Apple M8799LL/A AirPort Extreme Base Station with Modem and Antenna Port is no longer recognized by the airport setup utility, nor will it allow internet connection. Has worked fine until last weekend when I did a full disk utility on all of my drives. Now I get a message, none of your trusted networks are available would I like to join (my network name)? Airport looks fine, can connect locally, lights up as usual.
How can I make it trusted again and get dial up internet to work again?

resetting has worked for months with no return of the problem.

I have a airport extreme base station and i reset it and now the wifi connection is open to everyone... so how do i get a password back on it so everyone cant use it

i have a airport extreme base station and i reset it and now the wifi connection is open to everyone... so how do i get a password back on it so everyone cant use it

Read the user guide:
http://support.apple.com/manuals/#airport

I have a MacBook ProDo I have to have the Airport Extreme Base Station for my Airport Express to work?

I cannot get the darn Airport Express to work! It just keeps blinking Amber. I know it must be something silly I am over looking. And I do not have the Airport Extreme Base Station.
Thank you for any help!!!
Elizabeth

Thanks,
This is the rear of your modem/router:
Connect a Cat5e or Cat6 cable from any of the 4 Ethernet Lan ports to the (single) socket on the Express, then go to Airport Utility (Applications>Utilities>Airport Utility) and select create a new network.
You will need to turn the wireless transmiter in the Netgear off, here is a link to the Netgear Manual in case you need to refer to it.
Netgear Manual

Setting up airport extreme base station with Mac and PC

I have an '02 iBook with an airport card installed and an airport extreme base station. my roommate has a PC and has the DSL connection in her room. i want to wirelessly network my iBook via the airport base. how do i do this? (my base was given to me without any manuals/disks etc)

Your Netgear wireless router is your network's base station. Your parent's PC will not be "serving as a base station" - its presence on the network isn't at all relevant to what you want to do.
To connect your G5 to the Netgear wireless router's network - click on your Mac's Airport menu, click on the name of your Netgear wireless router's network (it will appear in the list when you click on the Airport menu), and enter the wireless network password (if applicable) when prompted by the MacOS. That's is - you are connected!

Configure TC and Airport Extreme Base Stations with different channels

I had to do some serious workarounds to use the Airport Extreme Base Stations as an access point with the same wireless network name primarily due to channel overlap. I thought I would post my results here since I didnt' find a good article online.
Also, I found the Snow Leopard verison (5.4.2) of the Airport Setup Utility far superior to Lion's Airport Utility (6.x) in terms of advanced setup.
Setup is a 3 flloor house where the 3 wired network locations have wireless overlap. The problem was that the access points would not hand off the wireless signal because the channels for each airport/TC were automatically set to the same channel. In non-apple setups, this is how you force a wireless client to switch access points (since the wireless software on your client/mac/windows can detect which access point is stronger and moves to the alternate channel.
Using apple's "Extend this wireless network" option removes any ability to manually configure wireless channels. I am writing this from memory, so feel free to ask questions and I will track this topic:
Procedure
Setup time capsule as your base station. Do all the setup for your wireless and guest networks. Manually configure the network and change the wireless channel to a specific channel for a/b/g networks (e.g., 3) and n networks (e.g, 167).
Plug your first airport extreme/access point into your wired network. Do not plug it into the "internet" ethernet plug, use one of the 3 ethernet switch locations
Use the airport utility to first configure it to "extend" your wired network.
Then, go in and reconfigure it manually in the airport utility. Choose the option to setup a "new network" and name the network the same as the TC wireless network name, security, etc.
Change the channel from "auto" to a different channel than the TC (e.g., 6 and 137).
Now go to the top tab and click on the "internet" icon
Go to the DHCP tab and change it to "bridge mode." This will tell the AE to not give out IP addresses (the TC will do this for you). If you get an error that the IP ranges conflict, you have not done this
Note that if you have a guest network setup, you will need to set this up on the AE as well.
Now test your airport setup. Take your client (macbook, iOS device) and connect to your network. Move to a spot near the TC and pull up a web page. Keep an eye on the signal strength and beginv moving toward the AE. Refresh the page as you move around. You should at some point see the signal strength increase. Refresh your page again. You should be now connected to to the AE. I have found that Macbooks do a better job than iOS devices because you get an extra signal bar to measure strength, and they have larger antennas which allows you to better measure problems with handoff
Another test you can do is to start backing up on your TC and then test the move. The handoff will truly show you that the TC is handling the process but the AE is relaying to the TC for backup.
If you need to setup another AE, simply follow setups 3-10.
I hope this helps others. I've done this setup 100 times on Linksys devices and although they are cumbersome, they at least allow me to do this setup much more quickly and easily than the apple products.

I had to do some serious workarounds to use the Airport Extreme Base Stations as an access point with the same wireless network name primarily due to channel overlap. I thought I would post my results here since I didnt' find a good article online.
Also, I found the Snow Leopard verison (5.4.2) of the Airport Setup Utility far superior to Lion's Airport Utility (6.x) in terms of advanced setup.
Setup is a 3 flloor house where the 3 wired network locations have wireless overlap. The problem was that the access points would not hand off the wireless signal because the channels for each airport/TC were automatically set to the same channel. In non-apple setups, this is how you force a wireless client to switch access points (since the wireless software on your client/mac/windows can detect which access point is stronger and moves to the alternate channel.
Using apple's "Extend this wireless network" option removes any ability to manually configure wireless channels. I am writing this from memory, so feel free to ask questions and I will track this topic:
Procedure
Setup time capsule as your base station. Do all the setup for your wireless and guest networks. Manually configure the network and change the wireless channel to a specific channel for a/b/g networks (e.g., 3) and n networks (e.g, 167).
Plug your first airport extreme/access point into your wired network. Do not plug it into the "internet" ethernet plug, use one of the 3 ethernet switch locations
Use the airport utility to first configure it to "extend" your wired network.
Then, go in and reconfigure it manually in the airport utility. Choose the option to setup a "new network" and name the network the same as the TC wireless network name, security, etc.
Change the channel from "auto" to a different channel than the TC (e.g., 6 and 137).
Now go to the top tab and click on the "internet" icon
Go to the DHCP tab and change it to "bridge mode." This will tell the AE to not give out IP addresses (the TC will do this for you). If you get an error that the IP ranges conflict, you have not done this
Note that if you have a guest network setup, you will need to set this up on the AE as well.
Now test your airport setup. Take your client (macbook, iOS device) and connect to your network. Move to a spot near the TC and pull up a web page. Keep an eye on the signal strength and beginv moving toward the AE. Refresh the page as you move around. You should at some point see the signal strength increase. Refresh your page again. You should be now connected to to the AE. I have found that Macbooks do a better job than iOS devices because you get an extra signal bar to measure strength, and they have larger antennas which allows you to better measure problems with handoff
Another test you can do is to start backing up on your TC and then test the move. The handoff will truly show you that the TC is handling the process but the AE is relaying to the TC for backup.
If you need to setup another AE, simply follow setups 3-10.
I hope this helps others. I've done this setup 100 times on Linksys devices and although they are cumbersome, they at least allow me to do this setup much more quickly and easily than the apple products.

I have a AirPort Extreme Base Station with Gigabit Ethernet 802.11n ?

Similar Messages

Maybe you are looking for