I have a band video that I want to edit. In iMove 09, I could clip to crop or add a transition or both without altering the audio. In iMovie 11, the audio lower or drops out when I clip for and use a transtion. Is there a setting to preven this?

Thanks for that info! Even in my time answering questions on iMovie Discussion Group, I never had a good understanding of when and how Optimize Movie came into play. I always would import as Optimized and Large Size and figured that was good enough. But knowing you got much, much more flexibility doing it the way you describe gives me a much better understanding of the different routes you can take into the Event Library.

Similar Messages

My phone crashed while away. apple backed the phone on a friends comp (pic/MMS/SMS/contacts). When I get home and use my comp backup to add music, etc will I lose SMS/pic, etc? THANKS!!!

my phone crashed while away. apple backed the phone on a friends comp (pic/MMS/SMS/contacts). When I get home and use my comp backup to add music, etc will I lose SMS/pic, etc? THANKS!!!

Follow this article to back up your data before syncing again to your computer:
https://discussions.apple.com/docs/DOC-3141
You can also use the camera wizard to copy your photos to your computer before you sync again.

I have to reenter my Wifi password every time I restart my Ipod touch. It used to retain the password but now it drops out when I turn the Ipod off. Any suggestions?

I have to reenter my Wifi password every time I restart my Ipod touch. It used to retain the password but now it drops out when I turn the Ipod off. Any suggestions?

Try:
ipod touch wont remember wifi password: Apple Support Communities
Also, have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?

Why does audio drop out when scrubbing iMovie events?

Why. does audio drop out when scrubbing iMovie events?

If the audio returns if you slow down scrubbing you are probably just scrubbing too quickly.

Exsternal harddrive drops out, when using adobe premiere pro cs5. Cant load projects. any one had this problem or the answer to it?

I have two WD external hard drives that i keep all my video files, music and adobe premiere pro cs5 projects on. Up until 2 days ago they were working perfect, now they drop out when i try and load my projects from them, or watch a movie from them. tried restoring from two weeks ago and nothing changed. I get that error msg when i try and load something. The error msg is the one that comes up when you disconnect a usb drive without ejecting it correct. I don't think its the drives as i only use one most the time, and the other just sits there not connected, but that are now having the same issues. Help me plaza

yea i am using the right sequence
here are 4 screen shots of 2 different things i was editing, both used to record my xbox 360 with Hauppauge, Seems adobe is the only program playing the video file with the audio out of sync/mixed up
[URL=http://imageshack.us/photo/my-images/803/screenshotlrh.png/][IMG]http://img803.imageshack.us/img803/1669/screenshotlrh.png[/IMG][/URL]
[URL=http://imageshack.us/photo/my-images/826/screenshot2yv.png/][IMG]http://img826.imageshack.us/img826/3012/screenshot2yv.png[/IMG][/URL]
[URL=http://imageshack.us/photo/my-images/841/screenshot3aa.png/][IMG]http://img841.imageshack.us/img841/7042/screenshot3aa.png[/IMG][/URL]
[URL=http://imageshack.us/photo/my-images/5/screenshot4on.png/][IMG]http://img5.imageshack.us/img5/6096/screenshot4on.png[/IMG][/URL]
The Yellow Devil May Cry video is the video with the audio problem,
The metal gear rising video is red because of the pic above it, and the sound works ok on that, infact that video is finished and uploaded to youtube now.

ADSL Broadband keeps dropping out when trying to u...

Hi, hope someone can offer some advice please.
Our connection seems to have got a lot slower over the last few months (about 2.64 on a very good day) and now keeps dropping out when trying to use either the laptop or PS3. I have followed the advice on the self help guide and tried changing the ADSL filter, moved the hub away from the telephone, re-booting the hub and tried using it directly in the test socket and none of these have solved the problem. I have done a line test from work and it says there are no problems with the line??? I am getting really annoyed as we only have the phone line so we can use the internet so are paying over £40 a month for service we cant even use. I get the impression that as there are so many users on ADSL where I live (we dont have fibre optic yet) that it is too much for the exchange and that BT are upping peoples connections when they complain thus making other peoples worse (we had this problem about a year ago and complained and it was ok for a while)
Could this be true? Or am I just thinking too much in to it? And does anyone have any suggestions on how I could resolve the problem? I have had a bad experiance with being charged for an engineers visit in the past (eventually refunded) so would like to avoid having to get them involved if possible.
Thanks in advance.

you post the adsl stats from your router may need to 'show detail' to get all stats (if hub enter 192.168.1.254 in your browser and navigate to adsl or use a-z, if netgear enter 192.168.0.1) and run btspeedtester (MAC users may have problems) http://speedtester.bt.com or http://bt.custhelp.com/app/answers/detail/a_id/9354/c/346,4740,5520 and post the results .
Someone may then be able to offer help/assistance/suggestions to your problem
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

File Name Associations Drop Out When Changing Project Name

Posting on behalf of a colleague. He's using Robohelp X5 on a
Windows XP computer.
"We have frequent occasions in which we must take an existing
online help project (ABC_001, for example), make some
tweaks/additions/omissions, and release a revised online help
project (ABC_002). We have been cloning the existing help project
(ABC_001), renaming the project, making the necessary changes to
the help project, adding or deleting map IDs in .hh files as
necessary, importing revised .hh files as necessary, and then
releasing the project under the new name. We want to maintain map
ID numbers and assignments (25ANG1, Map #: 640, File name:
Synchronism Check#25ANG1) from ABC_001 to ABC_002, but the File
name associations drop out when we change the project name. It is
then a laborious process to go through the list and reassign all
the topics to the appropriate File names. Is there any way to
maintain topic labels with their map ID numbers and their File name
associations from one project to another?"
TIA

My colleague's reply:
"I discovered that it requires just one more step in the help
project before I can actually see the file name
associations/aliases again. I have to recompile, as Colum
recommended, but then I have to close down RoboHelp and reopen the
project. Then, if I am in Project View and navigate to
Context-Sensitive Help/Map Files/All Map IDs, I can see all of the
file name associations again. Thank you, Colum, for your
help!"

SCCM remote control keeps dropping out when another network adaptor loses connection

Hey guys,
Hopefully someone will be able to help me out
at work, we are running SCCM 2012, and I use SCCM 2012 config manager to manage the clients etc
We have a particularly annoying issue with SCCM remote control; it constantly drops out when a network connection on the client machine disconnects or changes state, even if its not interface I'm remote controlling through
Here's an example for you:
a laptop with a wired, and wireless connection:
I remote control the machine through the wired network address (lets say 192.168.0.1), but if the wireless connection drops out (someone turns it off or it breaks) the remote control client will kick me off, lock the screen, and I have to wait 20-30 seconds
before it will accept my connection again
This happens with any network adaptor that's installed on the client
Here is a copy of the logs re-creating this issue: https://www.dropbox.com/s/nu4w28d44xky3rg/CmRcService.log
(I've edited it to take out usernames and IP addresses as they are publicly accessible)
So my question, does any one know how to fix this issue? I see it uses WMI, is there anyway to get WMI to ignore an interface?
Thanks heaps,
Harry

This is going to be done by design for security reasons. If the network connect for whatever reason is down the pc will automatically be locked.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Gradients dropping out when opening PDFs in Illustrator

Hi everyone. I work for a large format printing company. We receive thousands of files every year from many different designers. We started to notice that gradients would drop out of some PDFs when opening them in Illustrator but they would preview fine when opened in Acrobat. I searched high and low for an explanation for this glitch. The only response I received is "Stop opening exported PDFs in Illustrator." This is an unsatisfactory answer for someone that needs to preflight directly in the Illustrator program. I've done a ton of research and have been racking my brain for the last 2 years and have finally found sufficient workarounds for this issue. The downfall with these workarounds: all spot colors located in the gradients will convert to CMYK mixes. I'm still researching to see if there is a way to keep spot colors intact in these areas.
A little back story: InDesign is converting the gradients into something called NChannel. It enables more accurate handling of color blending by including additional dot gain and color mixing info. Both InDesign and Acrobat have the ability to display these elements whereas Illustrator, from what I’m finding, does not. Which is why we’re seeing gradient elements drop out when opened in Illustrator.
Workaround for CMYK Gradients
Open PDF exported from INDD in Acrobat
Go to Tools > Print Production > Convert Colors
Object Type: Smooth Shade (this tells Acrobat to hone in on Gradients only)
Color Type: DeviceCMYK
Check Embed next to Conversion Profile (should be SWOP)
Expand Document Colors on the right and Select DeviceCMYK in Color Spaces then click ok
Save the PDF
Workaround for 1 Spot Color in Gradients (Converts Spot Color located in Gradient to CMYK – all other Spots stay intact)
Open PDF exported from INDD in Acrobat
Go to Tools > Print Production > Convert Colors
Object Type: Smooth Shade (this tells Acrobat to hone in on Gradients only)
Color Type: Spot Color
Check Embed next to Conversion Profile (should be SWOP)
Expand Document Colors on the right and Select the Spot that is located in the Gradient in Color Spaces then click ok
Save the PDF
Workaround for 2 Spot Colors in Gradients (Converts Spot Colors located in Gradient toCMYK – all other Spots stay intact)
Open PDF exported from INDD in Acrobat
Go to Tools > Print Production > Convert Colors
Object Type: Smooth Shade (this tells Acrobat to hone in on Gradients only)
Color Type: Spot Color
Check Embed next to Conversion Profile (should be SWOP)
Expand Document Colors on the right and Select the DeviceN spot color that is located in the Gradient in Color Spaces then click ok
Save the PDF
Please test it and let me know if you run into any issues with these workarounds. I'm always looking for new problems to solve!
- Jenny

you said--"...needs to preflight directly in the Illustrator program. I've done a ton of research and have been racking my brain for the last 2 years and have finally found sufficient workarounds for this issue"
Your workarounds seem time consuming and (possibly) unnecessary for the following reasons:
1. large format printers use 4-8 colors to achieve color (so spot colors shouldn't be an issue)
2. Acrobat Pro has it's own 'preflight' function that works fairly well
additionally (don't know if you know this) there is an add-on to acrobat called 'Pitstop' (google it) that allows just about any change/correction/alteration to be made to a PDF
...and...opening a PDF in illustrator (that wasn't created in illustrator--do you know how to determine this?) can lead to many problems i.e. gradients dropping out, text reflow, etc.
as far as testing your workarounds, seriously, who has the time when there are tools available that make using them unnecessary (this assumes that you have created these 'workarounds' to match your worflow--but a nearly pure PDF workflow should work in this day and age, depending on your RIP and software).

Ligatures drop out when printing from ID CS3 to a PS3 printer

Just got a new Dell 5110cn and this issue is driving me nuts.
InDesign CS3, Vista 64-bit. Am using the PS3 driver for the 5110cn, not the PCL driver.
I have disabled device font substitution in the driver. I have gone into the font substitution table and set everything to "Don't Substitute."
When I print directly from ID CS3, the "fi" ligatures in words like "certificate" or "verification" drop out.
The font in question is "Times".
If I Export the document to PDF, the ligatures view fine and print fine from the PDF.
Illustrator-created EPS files with the word "certificate" that are then dropped into ID CS3 print fine when printed direct.
I can print MS Word documents that have the word "certificate" in Times directly to the printer and those print fine (but for all I know, Word isn't using the same ligature method).
While this is a new printer, the behavior apears to be isolated to InDesign (printing direct from Adobe Illustrator is fine as well).
What gives???

Gah!
Why the hell is that disabled by default???
The other way I fixed it was to change from "Times" to "Times New Roman" and that worked (even without the Download PPD Fonts option checked).
Thanks!

My iPhone 4s is closing out when texting,playing games and in middle of phone call! I have restore phone anyone with same Isusse!

My iPhone 4s is closing out when texting,playing games and in middle of phone call! I have restore phone anyone with same Issue?

My phone will go black and it drops the call or game will restar, I have call apple care and they had me restore the phone with I tunes and nothing change! help!

Tables dropping out when saving PDF files

I have saved a document through writing to PDF in the Print dialog and also by exporting as PDF, but with the same results. In a 40 page document 3 of the tables get dropped out when saving so all I get is blank space where they should be.
Perhaps related is an interesting printing problem. When I print the entire document these same three tables are missing. But if I go back and print only the pages they appear on then the tables will print.
Any suggestions?

Happens with a Konika-Minolta Magicolor, a Brother 1470-N and an HP Laserjet.

Dropping out when on skype

i am talking on skype and not usin video,we are boyh just talking only and my computer is dropping out when talking and i go offlinr and online and loose my call and constanly have to wait yill i come online again.Why is this happening? I have changed to Optus snd havent had problemd until nos eith this...Is there anyone who can help me here..finally i can chat for nothin and this happens..my mic and earphones seem fine and use no video...help plz

Not sure about the power issue but USB modems are known for problems.
An Ethernet modem is not supported by your ISP?
I would make the switch to an Ethernet modem if possible.

HT204053 I have 2 itunes accounts that I want to put on one iCloud, but can't get them to sync. What can I do that the instructions aren't telling me?

I have 2 itunes accounts that I want to put on one iCloud, but can't get them to sync. What can I do that the instructions aren't telling me?

You don't mention anything about the music files on your computer that were used to copy into iTunes. If you have moved those files to a different location on you PC you will get that error message from iTunes. This is because iTunes will look for the music files in the original location that they came from on your PC when they were copied. If this is the case you have to tell iTunes to look in the new location for the music files or move the music files back to the original location.

HT204053 I have an apple ID that I want to use it for icloud, but when I Set it, i got below message

I have an apple ID that I want to use it for icloud, but when I Set it, i got below message
I could requires an apple id that Is an email address ( [email protected] address )
Please help me
<Email Edited by Host>

Your gmail address is still your apple id. Just when you activate your mail and notes, it asks you to create icloud e-mail, which is completely separate and allows you to have one more e-mail address. Just some extra benefit, you don't have to pay for, but useful to save your notes and send e-mail or two if Google server goes down.

I have a band video that I want to edit. In iMove 09, I could clip to crop or add a transition or both without altering the audio. In iMovie 11, the audio lower or drops out when I clip for and use a transtion. Is there a setting to preven this?

Similar Messages

Maybe you are looking for