I have a base station express that cannot be set

The express just blinks yellow when I go to set up it just reads can not be set up by this.
All my computers read the base station express name but they don't set up....why,

I would suggest that you perform a "factory default" reset on the Airport Express Base Station (AX). Note: You may have to attempt this several times to make sure that it "sticks."
Once the reset has completed, temporarily connect the AX directly to your computer via an Ethernet connection, and then, use the AirPort Utility to configure it as you require for your situation.

Similar Messages

I moved to new house where I have wifi base station I made extension via TP-link power line adapter and connect my Airport utility 6.3.2, but I don't now how to set up as a second network with one IP address?Could you help me please?

I moved to new house where I have wifi base station I made extension via TP-link power line adapter and connect my Airport utility 6.3.2, but I don't now how to set up as a second network with one IP address?Could you help me please?

Urvergessen wrote:
+You may have already done this, but do you have the first AirPort Express configured to "Allow this network to be extended"?+
Could not find that setting anywhere.
It's in AirPort Utility, AirPort panel, Wireless tab.
When I'm within the range of the base station I connect normally, but further away the connection drops despite the fact that the other Airport is very close and light is green. Interestingly, my PB Pro has signal almost everywhere in the house, but my iPhone and Mac Mini don't. Most likely just a hardware difference?
In AirPort Utility with the second Express, in the AirPort panel, Wireless tab, have you checked "Allow wireless clients"?
The second AP does show an IP address: 10.0.1.3.
With a "Configure IPv4" setting of "Using DHCP", that suggests that the second Express really is connecting to the first Express. In that case I have no other explanation of your your problem.

Changed Base Station security; not cannot connect

Added WPA2 Personal security to AirPort base station this morning, now one of three computers cannot connect to the network, despite repeated reboots and connection attempts (Network name and password checked for typos each time).
The machine in question is a PowerPC G4 running OS X (10.4.11).
Any suggestions as to where I start to sort this out?
It's got a lot of vital data on it, but it's in the basement, and running up and down stairs is a strain on aging and arthritic knees.

The Base Station does not have anywhere near the security capabilities of the PIX. It also doesn't cost anywhere near what the PIX does. Where it gets the security it does have (in Base Station mode) is from PAT and its lack of support for static translations. As well, Telnets and HTTP access from the ethernet side (in Base Station mode) are disabled, so those out on the Internet pointing browsers and telnet clients at random addresses are not going to get access. That's why fresh from the box or a reset, administration has to be done from the radio side.

Do I need an internet connection to use the airport base station express?, Do I need an internet connection to use the airport base station express?, Do I need an internet connection to use the airport base station express?

we have no wireless internet in my house and the only internet connection is a laptop aircard that does not give off signal. will the base station express work without an internet connection being fed to it?

On the windows computer that is connected to the internet you will need to enable Internet Connection Sharing, see link below. On the Airport you will need to turn Connection Sharing OFF as the Airport will not be handling NAT (network address translation) or be a DHCP Server as this will be handled by the computer with ICS.
http://windows.microsoft.com/en-US/windows-vista/Using-ICS-Internet-Connection-S haring

I have an old Airport Express that won't connect/set up with Yosemite. Any help appreciated

Hi, as the title suggests I have an old Airport Express that I have always used wirelessly to connect to my hifi but now that I have upgraded to Yosemite it won't connect via Airport Utility 6.3.4 and Yosemite won't let me use Airport Utility 5.6 Seems I'm stuck between a rock and hard place! Ethernet is no use as the hifi is in another room. Yosemite is running on an iMac and is connected wirelessly to Virgin Broadband. Thanks, Alex.

If the AirPort Express is very old, such as the original 802.11b/g - only models A1084 or A1088 you will need a commensurately older version of both AirPort Utility and OS X to configure it. Those models were discontinued about seven years ago and support for them is gone. Ethernet won't make a difference anyway.
You may find instructions or links to web sites with instructions to modify OS X in an effort to circumvent that restriction. I cannot emphasize enough just how bad an idea that would be.

I have the iPhone 4, and yesterday I synced my photos onto iTunes, but now I have albums on my phone that cannot be deleted, and there is not an option to delete the items in the albums individually... How do I get rid of these unwanted albums? Windows 7

I have the iPhone 4, and yesterday I synced my photos onto iTunes, but now I have albums on my phone that cannot be deleted, and there is not an option to delete the items in the albums individually... How do I get rid of these unwanted albums? Using Windows 7.

If you used iTunes to get the photos on the phone, then use the same iTunes and uncheck the music you don't want and do another sync.

I have SSRS parametarized report in that one data set have repeated values with query parameter . but while am mapping that query parameter to report parameter i need to pass distinct values. How can i resolve this

I have SSRS parametarized report in that one data set have repeated values with query parameter . but while am mapping that query
parameter to report parameter i need to pass distinct values. How can i resolve this

Hi nancharaiah,
If I understand correctly, you want to pass distinct values to report parameter. In Reporting Service, there are only three methods for parameter's Available Values:
None
Specify values
Get values from a query
If we utilize the third option that get values from a dataset query, then the all available values are from the returns of the dataset. So if we want to pass distinct values from a dataset, we need to make the dataset returns distinct values. The following
sample is for your reference:
Select distinct field_name from table_name
If you have any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

I recently purchased the Apple Airport Extreme Base Station so that I can have wireless, my question is: so I need anything else so that my guests can have internet access via my router?

Hello Anyone and Everyone who can answer my question,
I would like to be able to offer wireless access to the internet for my guest's who use my apartment above my garage that is about 75 feet away from my house/computer. I have a MacBook Pro and have satellite internet service through an ehternet connection. I recently purchased an Apple Extreme Base Station with simultanious Dual-Band (MC34OLL/A), that is in the process of being shipped as I type, and am wondering if I need anything else to install in the apartment for the wireless to work with the Apple Extreme Base Station? Thank you for any help in this matter.
Sincerely,
Lizzy

In AirPort Utility, enable the guest network by selecting your Extreme, then the Edit button, then the Wireless tab, then check the box for "Enable Guest Network":

How do I see what (cabled) link speed I have between base stations?

Hi
I do own one new Airport Extreme base station and one older Airport Extreme (flat one).
Both are capable of 1 Gbit-speed via ethernet cable. I have the new base station as "master" and the old as extender (via cable). How can I ensure that the speed between them are using Gbit and not 100 Mbit?
"use cable xxxx" is not an answer I will settle with, I want to se the numbers somehow, via Airport Utility or 3rd party.
Is this possible?
Very thankful for any help I might get.
/Erik

There is no info in the airport utility and there is no third party to get you in either..
There is no easy way.. but a gigabit switch plugged in between the two devices would instantly show you the connection speed if it has LED indicators that show gigabit.
Gigabit switches are not that much money to payout now. Particulary if you have some place you might use one.
Otherwise simply do a throughput test.. plug a computer into the main unit by ethernet and plug another computer into the other end.. if you get a file copy speed say 15MB/s you have gigabit. You cannot pass files at greater than about 12MB/s on 100mbit.

Silly Base Station / Express question

Hi. Silly Question... Is my Airport Express my Base Station? I've only got the Express and I can connect to the internet just fine. Or does Base Station refer specifically to the round flying-saucer looking thingy? That would explain why I can't see it listed in Airport Setup utility under the Base Station columns. I'm trying to make sure my Express is set up correctly to print, but I didn't specify having a printer when I set up the Wireless Network. Sorry about this, but it might just solve my problem. Thanks in advance. I promise I'll learn quickly.
M
Ibook Mac OS X (10.4.2)

I'm not sure if it's a defective AX... just from my personal experience I had similar issues with 3 I needed to return.
If I recall correctly, you only have 2 choices... either the AX acts as a base station or it's a client of another base station. I suppose it might be possible you had it set as a client and it's just picking up an open access point nearby.
I would just try restarting the AX and your computer. If that doesn't work, maybe you could try a soft -> hard -> factory reset, in that order.
Do you have an Apple Store nearby? If so, and none of the above works, you can always take it to the genius bar and they may be able to help.
Curt

Oops. Messed up Snow Base Station system that worked..

My Snow Base Station ran fine with the Pacbell ADSL modem for seven years.
Had three laptops and tower at home wireless with no issue.
Yesterday, after getting Road Runner cable modem installed, tried to use it with the cable modem - had disasters continually so tried to go back to the old ABC plus ADSL modem.
1. My airport base station shows up in Airport bar.
2. Shows up in Airport Administration utility.
3. have the Pacbell domain numbers and all of that in the TCP/IP window.
However,
Still no internet and when I launched Airport Setup Assistant, the base station shows up as a network but it doesn't show up other than that and I still can't on the internet.
Any help you can give me is greatly appreciated.
So furious I messed this up; should have stayed with the Pacbell modem.

I too messed up my once working network. I have an eMac that was connected (hardwired) to my Snow Base and an iBook G4 that was connecting wirelessly. Both could access the internet just fine.
Then I switched the Airport Base out for a D-Link wireless router (for some reason my wife's PDA couldn't connect to the Airport network, but can with the D-Link) That was, anyway, for about 1 day, which is when the D-link stopped working. I tried to go back to the Snow base, but now I can't get it to work.
I can connect (using PPOE), if I hardwire my eMac right to the DSL modem (Verizon Westell Wirespeed), but not when it's going through the Snow base. Everything is hooked up correctly cable wise, my passwords and user names are correct. But when the ABS is hooked up to the modem, it can't connect. The ABS also shows up just fine as a wireless network on my iBook. I can access it via Airport Admin, but when I try to get online, it just says "looking for PPOE Host" but never connects.
I'm pretty sure I've got it configured correctly, Airport is using PPOE and the Emac is set to DHCP. I basically just reverted to the settings I had when it was set up last.
I'll try the power cycling, hopefully that works, if not...
HEEEEELPPPPPPPPPPPP!!!
Thanks
ibookG4, eMac G4 Mac OS X (10.3.9) Airport Snow Dual Ethernet Base Station

Since installing Mavericks on my MacBook Pro, I have many (not all) documents that cannot be opened in either Pages '09 or Pages 5. They show on my doc lists, but are greyed out so I can't try to change extensions or anything else. Some are PDFs.

Since installing Mavericks on my MacBook Pro, I have many documents, but not all, that cannot be opened in either Pages 5 or in Pages '09. The names show in my document lists, but are greyed out. They do not show any extensions, but I'm sure at seast some of them are PDFs. As I cannot open them, I am unable to try to experiment with any solutions - I am not tech savvy, but can sometimes fix things by trial and error. I have no issues with sharing documents as I have no other devices. I just want to be able to open my saved documents! Also, the documents I can open have to be persistently coaxed to open to a point that it is extremely aggravating. I am not so happy with this recent "upgrade." Any advice would be greatly appreciated.

You use Finder to find stuff. It is what you use to look at where your files are kept and to rename, move or trash them. If you double click on a file in Finder it finds the right software to open it for you.
To open particular files you use the right software for each type. Usually, but not always, the software that made the file.
Pages opens files ending in .pages. Also .txt, .rtf, and doc.
Pages 5 is the latest (but certainly not the greatest) version of Pages. It has trouble opening all sorts of files including the older Pages '09 files but it will still do it.
Unfortunately Apple has chosen for Pages 5 to also save its files as exactly the same file extension .pages despite it being a different format that can not be opened by the older Pages '09.
As we all know Apple is wise and great beyond belief and would not do something that on the face of it looks extraordinarily stupid and shortsighted. Therefore we know that it must be our fault and we are not holding the software right. Because we are bad users, we must be punished, by either having to use Pages 5 or jump through hoops to avoid using Pages 5.
If you have installed Pages 5 any .pages file (old or new) will be opened by Pages 5. If you then save the file, Pages 5 will change the file format. So don't open your files with Pages 5 and don't save them if you do.
To stop Pages 5 opening and resaving your old files, you need to drag it to the trash and empty it.
When it is no longer around to annoy you, you can go back to using Pages 09.
Peter

How to improve wi fi signal in house I have airport base station

how to improve wi fi signal in house I have airport base station

Please check out the following AirPort User Tip to get started. If you have any additional questions, please feel free to post back.

ProgressProperty and isCancelled causing a bound value that cannot be set.

I noticed that cancelling the following application causes errors since a bound value cannot be set. I tried to add some conditions to prevent this error from happening but to no avail.
The following is the main culprit:
pb.progressProperty().bind(serv.progressProperty());You can also notice that I tried to use progressProperty and ChangeListener instead of bind method. Unfortunately unsuccessfully. Can I make progressbar functioning without bind method (code above)?
Complete error message when cancel button is pressed is the following:
Service status: SCHEDULED
Let the download begin!
Service status: CANCELLED
Service status cancelled when progress was: 0.09582292038557658
java.lang.RuntimeException: A bound value cannot be set.
     at javafx.beans.property.DoublePropertyBase.set(Unknown Source)
     at javafx.scene.control.ProgressIndicator.setProgress(Unknown Source)
     at dm.Thr$2.handle(Thr.java:73)
     at dm.Thr$2.handle(Thr.java:1)
     at com.sun.javafx.event.CompositeEventHandler.dispatchBubblingEvent(Unknown Source)
     at com.sun.javafx.event.EventHandlerManager.dispatchBubblingEvent(Unknown Source)
     at com.sun.javafx.event.EventHandlerManager.dispatchBubblingEvent(Unknown Source)
     at com.sun.javafx.event.CompositeEventDispatcher.dispatchBubblingEvent(Unknown Source)
     at com.sun.javafx.event.BasicEventDispatcher.dispatchEvent(Unknown Source)
     at com.sun.javafx.event.EventDispatchChainImpl.dispatchEvent(Unknown Source)
     at com.sun.javafx.event.BasicEventDispatcher.dispatchEvent(Unknown Source)
     at com.sun.javafx.event.EventDispatchChainImpl.dispatchEvent(Unknown Source)
     at com.sun.javafx.event.EventUtil.fireEventImpl(Unknown Source)
     at com.sun.javafx.event.EventUtil.fireEvent(Unknown Source)
     at javafx.event.Event.fireEvent(Unknown Source)
Cancelling!
Finished/cancelled!
     at javafx.scene.Node.fireEvent(Unknown Source)
     at javafx.scene.control.Button.fire(Unknown Source)
     at com.sun.javafx.scene.control.behavior.ButtonBehavior.mouseReleased(Unknown Source)
     at com.sun.javafx.scene.control.skin.SkinBase$5.handle(Unknown Source)
     at com.sun.javafx.scene.control.skin.SkinBase$5.handle(Unknown Source)
     at com.sun.javafx.event.CompositeEventHandler.dispatchBubblingEvent(Unknown Source)
     at com.sun.javafx.event.EventHandlerManager.dispatchBubblingEvent(Unknown Source)
     at com.sun.javafx.event.EventHandlerManager.dispatchBubblingEvent(Unknown Source)
     at com.sun.javafx.event.CompositeEventDispatcher.dispatchBubblingEvent(Unknown Source)
     at com.sun.javafx.event.BasicEventDispatcher.dispatchEvent(Unknown Source)
     at com.sun.javafx.event.EventDispatchChainImpl.dispatchEvent(Unknown Source)
     at com.sun.javafx.event.BasicEventDispatcher.dispatchEvent(Unknown Source)
     at com.sun.javafx.event.EventDispatchChainImpl.dispatchEvent(Unknown Source)
     at com.sun.javafx.event.BasicEventDispatcher.dispatchEvent(Unknown Source)
     at com.sun.javafx.event.EventDispatchChainImpl.dispatchEvent(Unknown Source)
     at com.sun.javafx.event.EventUtil.fireEventImpl(Unknown Source)
     at com.sun.javafx.event.EventUtil.fireEvent(Unknown Source)
     at javafx.event.Event.fireEvent(Unknown Source)
     at javafx.scene.Scene$MouseHandler.process(Unknown Source)
     at javafx.scene.Scene$MouseHandler.process(Unknown Source)
     at javafx.scene.Scene$MouseHandler.access$1300(Unknown Source)
     at javafx.scene.Scene.impl_processMouseEvent(Unknown Source)
     at javafx.scene.Scene$ScenePeerListener.mouseEvent(Unknown Source)
     at com.sun.javafx.tk.quantum.GlassViewEventHandler.handleMouseEvent(Unknown Source)
     at com.sun.glass.ui.View.handleMouseEvent(Unknown Source)
     at com.sun.glass.ui.View.notifyMouse(Unknown Source)
     at com.sun.glass.ui.win.WinApplication._runLoop(Native Method)
     at com.sun.glass.ui.win.WinApplication.access$100(Unknown Source)
     at com.sun.glass.ui.win.WinApplication$2$1.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)Application:
import java.io.BufferedInputStream;
import java.io.BufferedOutputStream;
import java.io.File;
import java.io.FileNotFoundException;
import java.io.FileOutputStream;
import java.io.IOException;
import java.io.InputStream;
import java.net.MalformedURLException;
import java.net.URL;
import javafx.application.Application;
import javafx.concurrent.Service;
import javafx.concurrent.Task;
import javafx.event.ActionEvent;
import javafx.event.EventHandler;
import javafx.scene.Group;
import javafx.scene.Scene;
import javafx.scene.control.ProgressBar;
import javafx.scene.control.TextArea;
import javafx.scene.layout.VBox;
import javafx.scene.paint.Color;
import javafx.stage.Stage;
public class Thr extends Application {
     @Override
     public void start(Stage stage) throws Exception {
          final Group rootGroup = new Group();
           final Scene scene = new Scene(rootGroup, 500, 400, Color.GHOSTWHITE);
           stage.setScene(scene);
           stage.setTitle("Testing downloads from Spring");
           stage.show();
           setS(rootGroup);
     final VBox vbox = new VBox();
     final javafx.scene.control.Button btn = new javafx.scene.control.Button("START!");
     final TextArea tf = new TextArea();
     final javafx.scene.control.Button btnC = new javafx.scene.control.Button("CANCEL!");
     final ProgressBar pb = new ProgressBar();
     final FirstLineService serv = new FirstLineService();
     boolean cancelled = false;
     private void setS(Group rg) {
          tf.setPrefRowCount(5);
          vbox.getChildren().add(btn);
          vbox.getChildren().add(tf);
          vbox.getChildren().add(btnC);
          vbox.getChildren().add(pb);
          pb.setPrefWidth(450);
          rg.getChildren().add(vbox);
          btn.setOnAction(new EventHandler<ActionEvent>() {
               @Override
               public void handle(ActionEvent arg0) {
                    serv.start();
                    System.out.println("Service status: "+serv.getState());
                    tf.setText("STARTED!");
          btnC.setOnAction(new EventHandler<ActionEvent>() {
               @Override
               public void handle(ActionEvent arg0) {
                    serv.cancel();
                    System.out.println("Service status: "+serv.getState());
                    System.out.println("Service status cancelled when progress was: "+serv.getProgress());
                    tf.appendText("\nCANCELLED!");
                    pb.setProgress(serv.getProgress());
          //pb.setProgress(0);
          if (cancelled!=true) {
               pb.progressProperty().bind(serv.progressProperty());
          } else {
               pb.progressProperty().unbind();
          /*pb.progressProperty().addListener(new ChangeListener<Task>() {
               @Override
               public void changed(ObservableValue<? extends Task> arg0,
                         Task arg1, Task arg2) {
                    // TODO Auto-generated method stub
                    pb.setProgress(serv.getProgress());
     private class FirstLineService extends Service {
        protected Task createTask() {
            return new Task<Void>() {
                protected Void call() {
                     URL url;
                         try {
                              url = new URL("http://s3.amazonaws.com/dist.springframework.org/release/SPR/spring-framework-3.1.1.RELEASE.zip");
                           InputStream in = url.openStream();
                           int fileSize = url.openConnection().getContentLength()/1024;
                           File f = new File("spring.zip");
                           BufferedInputStream bin = new BufferedInputStream(in, 1024);
                           FileOutputStream fos = new FileOutputStream(f);
                           BufferedOutputStream bos = new BufferedOutputStream(fos, 1024);
                           int n=0;
                           int k=0;
                           System.out.println("Let the download begin!");
                           while(n !=-1){
                                if (isCancelled()) {
                                     cancelled = true;
                                        n=-1;
                                        System.out.println("Cancelling!");
                                   } else {
                                   k=k+1;
                                n=bin.read();
                                bos.write(n);
                                updateProgress(k/1024,fileSize);
                                //pb.progressProperty().bind(this.progressProperty());
                                //pb.setProgress(getProgress());
                           bos.close();
                           System.out.println("Finished/cancelled!");
                         } catch (MalformedURLException e) {
                              e.printStackTrace();
                         } catch (FileNotFoundException e) {
                              e.printStackTrace();
                         } catch (IOException e) {
                              e.printStackTrace();
                      return null;
     public static void main(final String[] arguments)
          Application.launch(arguments);
}

The following is the main culprit:
pb.progressProperty().bind(serv.progressProperty());I think your problem is the following line:
   pb.setProgress(serv.getProgress()) //bound value cannot be setAdd a listener to a serv. progressProperty()
serv.progressProperty().addListener(new ChangeListener() {
                   @Override
                   public void changed(ObservableValue o, Object oldVal,
                           Object newVal) {
                      pb.progressProperty().setValue(serv.getProgress());
               });Here is the modified code:
import java.io.BufferedInputStream;
import java.io.BufferedOutputStream;
import java.io.File;
import java.io.FileNotFoundException;
import java.io.FileOutputStream;
import java.io.IOException;
import java.io.InputStream;
import java.net.MalformedURLException;
import java.net.URL;
import javafx.beans.value.*;
import javafx.application.Application;
import javafx.concurrent.Service;
import javafx.concurrent.Task;
import javafx.event.ActionEvent;
import javafx.event.EventHandler;
import javafx.scene.Group;
import javafx.scene.Scene;
import javafx.scene.control.ProgressBar;
import javafx.scene.control.TextArea;
import javafx.scene.layout.VBox;
import javafx.scene.paint.Color;
import javafx.stage.Stage;
public class Thr extends Application {
     @Override
     public void start(Stage stage) throws Exception {
          final Group rootGroup = new Group();
           final Scene scene = new Scene(rootGroup, 500, 400, Color.GHOSTWHITE);
           stage.setScene(scene);
           stage.setTitle("Testing downloads from Spring");
           stage.show();
           setS(rootGroup);
     final VBox vbox = new VBox();
     final javafx.scene.control.Button btn = new javafx.scene.control.Button("START!");
     final TextArea tf = new TextArea();
     final javafx.scene.control.Button btnC = new javafx.scene.control.Button("CANCEL!");
     final ProgressBar pb = new ProgressBar();
     final FirstLineService serv = new FirstLineService();
     boolean cancelled = false;
     private void setS(Group rg) {
          tf.setPrefRowCount(5);
          vbox.getChildren().add(btn);
          vbox.getChildren().add(tf);
          vbox.getChildren().add(btnC);
          vbox.getChildren().add(pb);
          pb.setPrefWidth(450);
          rg.getChildren().add(vbox);
          btn.setOnAction(new EventHandler<ActionEvent>() {
               @Override
               public void handle(ActionEvent arg0) {
                    serv.start();
                    System.out.println("Service status: "+serv.getState());
                    tf.setText("STARTED!");
                 serv.progressProperty().addListener(new ChangeListener() {
                   @Override
                   public void changed(ObservableValue o, Object oldVal,
                           Object newVal) {
                      pb.progressProperty().setValue(serv.getProgress());
          btnC.setOnAction(new EventHandler<ActionEvent>() {
               @Override
               public void handle(ActionEvent arg0) {
                    serv.cancel();
                    System.out.println("Service status: "+serv.getState());
                    System.out.println("Service status cancelled when progress was: "+serv.getProgress());
                    tf.appendText("\nCANCELLED!");
                    //pb.setProgress(serv.getProgress());n
          //pb.setProgress(0);
     //     if (cancelled!=true) {
//               pb.progressProperty().bind(serv.progressProperty());//
//          } else {
//               pb.progressProperty().unbind();
          pb.progressProperty().addListener(new ChangeListener<Task>() {
               @Override
               public void changed(ObservableValue<? extends Task> arg0,
                         Task arg1, Task arg2) {
                    // TODO Auto-generated method stub
                    pb.setProgress(serv.getProgress());
     private class FirstLineService extends Service {
        protected Task createTask() {
            return new Task<Void>() {
                protected Void call() {
                     URL url;
                         try {
                              url = new URL("http://s3.amazonaws.com/dist.springframework.org/release/SPR/spring-framework-3.1.1.RELEASE.zip");
                           InputStream in = url.openStream();
                           int fileSize = url.openConnection().getContentLength()/1024;
                           File f = new File("spring.zip");
                           BufferedInputStream bin = new BufferedInputStream(in, 1024);
                           FileOutputStream fos = new FileOutputStream(f);
                           BufferedOutputStream bos = new BufferedOutputStream(fos, 1024);
                           int n=0;
                           int k=0;
                           System.out.println("Let the download begin!");
                           while(n !=-1){
                                if (isCancelled()) {
                                     cancelled = true;
                                        n=-1;
                                        System.out.println("Cancelling!");
                                   } else {
                                   k=k+1;
                                n=bin.read();
                                bos.write(n);
                                updateProgress(k/1024,fileSize);
                                //pb.progressProperty().bind(this.progressProperty());
                                //pb.setProgress(getProgress());
                           bos.close();
                           System.out.println("Finished/cancelled!");
                         } catch (MalformedURLException e) {
                              e.printStackTrace();
                         } catch (FileNotFoundException e) {
                              e.printStackTrace();
                         } catch (IOException e) {
                              e.printStackTrace();
                      return null;
     public static void main(final String[] arguments)
          Application.launch(arguments);
}

Will there be a AirPort Express-base station, AirTunes that handles Video?

Will there be a AirPort Express-basstation med AirTunes that handles Video?

Nobody here knows as this is a user to user support forum. Speculation about future or possible Apple products is not allowed.
One product which can handle video which is available now is Elgato's eyeHome.
http://www.elgato.com/index.php?file=products_eyehome
EyeHome allows you to access the digital content you have stored on your Mac - photos, music, video, movies - and enjoy it on your TV and home entertainment system. EyeHome features an easy-to-use and remote-controlled TV interface. From the main menu's list of "EyeTV" recorded television, "Movies", "Music", "Pictures" and "Web", you can simply access your library of digital content.
My eyeHome is connected to my Airport network via an Airport Express in WDS mode and it works really effectively.
iFelix

I have a base station express that cannot be set

Similar Messages

Maybe you are looking for