I have a Belkin USB N150 Wireless Adapter used since my airport card broke. It worked in mountain lion however no longer works when i updated to mavericks. Anyone have a solution to this?
Is there anyway to fix this, or is there a way to downgrade back to mountain lion?
Hello melissanelson110,
If you've backed your Mac up with Time Machine, you may be able to revert to Mountain Lion by restoring from your backup.
OS X Mountain Lion: Revert to a previous OS X version
http://support.apple.com/kb/PH11181
Cheers,
Allen
Similar Messages
-
Hello! I used QuickTime for watch any videos on OS X Mountain Lion, but now, I'm passed to OS X Mavericks and QuickTime, when I open an .avi file, convert this in a .mov file. I'm sorry for my English, I'm French and I don't know speak English very well, but what can I do for QuickTime opens on .avi and doesn't convert to .mov?
HI GalaxieMusique,
I'm french too, but I'm going to write this post in english so that everyone may understand it
I have the same problem in Mavericks, but I'd say, more important, with QuickLook.
Indeed Quicklook can't read avi movies anymore. Actually it always been the case, but with Perian we were able to fix it. The problem is that Perian is no longer available for Mac OS 10.9....
I'd assume that our only hope is Apple themselves... It would be nice from Apple to creat an add-on for quicklook to be able to preview the avi movies.
In regards with quicktime, you can download QuickTime 7 here:
http://www.01net.com/telecharger/windows/Multimedia/lecteurs_video_dvd/fiches/10 0.html
and ask all the .avi movies to be played by QuickTime 7 and not QuickTime X (included into Mac OS).
Sorry for the english, we french people can make mistakes sometimes
If anyone has a solution for QuickLook, please do not hesitate. This topic is becoming a real mess.... -
I have a samsung scx 4100 series and i just updated to mountain lion and now i keep getting a "filter failed" error, anyone have any suggestions as to how to fix it.
Hi again, when you clicked on Mountain Lion and Lion in the App Store you are telling the laptop to reinstall them both.
You may have allowed simutanious downloads checked at the bottom of the window, I don't know, but I expect Mountain Lion is downloading, so Lion is waiting for it to finish, so if you have Mountain Lion installed cancel both download's.
Cancell both downloads anyway.
Go to the apple logo , top left, click on it, then click on about this mac, a window will open telling you what's installed, Mountain Lion is OX 10 version 10.8.2 click on more info, to find out more, Lion will be OX10 version 10.7.4.
Only update were it say's check for updates, not download now. -
My Rapoo 2300 wireless presenter didn't work with Mountain Lion
Hi.
Two months ago I bought a Rapoo 2300 Wireless Presenter that work perfectly with a MacBook 13' with Snow Leopard. Unfortunetly, when I tried use the same product in my new MacBook Pro with Mountain Lion, I can't. I want to know if there is any solution to this problem? Thank you for your time.Time to give up on the Rapoo and find a current presenter device that meets your needs and/or requirements. It would be beneficial if you could try it with your MacBook Pro, either in store, or with a return policy if it does not work.
Things to consider:
Application compatibility (e.g. Powerpoint, Keynote, etc.)
Current Apple hardware and Operating System compatibility
Has to do better than claiming OS X 10.5 or later
No support software (device driver) installation
Radio distance
Wireless, USB dongle
Bluetooth v2.1 +
Laser
Red
Green -
Have been using your products since 1984. Very sorry I upgraded to Mountain Lion. Wiped out all my old applications. Out of business until I get this fixxed. Can I go back to previous operating system? Time Machine?
Downgrade Lion/Mountain Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files.
In the future:
Before upgrading consider:
Don't upgrade if you are in the midst of important work. Wait until you have finished.
If you are having problems with your computer get them sorted out before you upgrade.
Verify that any mission critical software will be compatible with the upgrade. -
HP Laserjet 4100 and Belkin USB Parallel Printer Adapter
I'm a brand new Mac user. I wanted to connect my Mac to my existing HP Laserjet 4100 printer. To do that, I had to purchase a Belkin USB Parallel Printer Adapter. I saw that Mac wasn't supported by this adapter, so I called Belkin and they said it was supported. Tried to set it up and failed. Called Apple for help, was on the phone for quite a long time, and no luck. Went to HP site to load drivers, and no luck. I contacted HP online and was told this product is no longer supported.
So right now when I try to print, I get a message that says the printer is offline...but it's not. Anyone have any ideas for a workaround?
Thanks so much for any thoughts.I think you should be a little more patient in trying to find a solution. I have an HP Laserjet 4ML from 1992 that I still use every day.
In my case, I purchased an HP Jetdirect external parallel print server and have the printer connected to my router that way.
You may also want to power off the printer, reset Printing System, and then power on the printer and re-Add it in Print & Fax.
http://support.apple.com/kb/HT1341 -
Can't connect wirelessly HP Photosmart C4780 to MacBook Pro OSX 10.8.2 Mountain Lion.
Hi!
Didn't know exactly where to direct this question in the Apple Community so I chose Airport. To everyone, thanks in advance.
I’m really desperate. I’m a big Apple fan. I have two Apple MacBook Pro laptops with Mountain Lion software. I also have an Apple Airport Extreme. My HP Photosmart C4780 printer was also purchased from Apple. Anyway, my Internet service is AT&T. AT&T just upgraded my service with a new modem/router (AT&T U-Verse). Prior to the conversion, my wireless printer connection was working perfectly.
Now can’t print wirelessly. For your information, everything is connected via Wi-Fi. The AT&T technician stated that I no longer needed my Apple Airport Extreme, so it was removed. Naturally, after the tech leaves, we find out the HP printer wirelessly no longer works. Thinking that removing Airport Extreme may have been the problem, I reconnected it to the AT&T modem/router, however no change.
This appears to be an HP printer problem. I went to HP community support with the information below but I have received no solutions outside of buying a new printer.
“Ran the HP wireless network test report and it states that HP printer can’t find wireless router and to verify that the HP printer network name (SSID) matches the wireless router network name (SSID) exactly. The Diagnostic Summary in brief: Wireless On & Working & Security – Pass; Network Name (SSID) Found – Fail. Nothing else under diagnostic summary ran. Under Configuration Summary: It shows old SSID name and Mac Hardware Address but no IP Address.
Next ran the Network Configuration Page and everything is enabled except the 802.11 Wireless. It shows status – disconnected. Under general information it states the following: Network status - Offline; Active Connection Type - None; URL(s) for Embedded Web Server – http://0.0.0.0.”
To be straightforward, I’m no computer tech so I don’t know what this means or where to find. The AT&T tech provided me the new SSID Name and a wireless key number but that’s it. Also I uninstalled and reinstalled via USB. The HP message states can’t find router. At this point, I’ve tried everything to reconfigure without success. If I need to make these changes via Airport Extreme Utility 6.0 not easy to find not that I know what I’m doing.
Most importantly if I ever get wireless working again, do I still need Airport Extreme connection or is the AT&T U-Verse modem/router sufficient?
Any direction or help is greatly appreciated. Thank you for listening.Thank you for your prompt response. I'll be honest I'm a retiree and a newbie to all of this stuff. I don't even know how to do a thread. (Embarassing) This is my first ever contact with the Apple Community so I'm slowly trying to figure this out as well.
As to your thread request, I'm assuming you want to read my post with HP. Not knowing how to thread, I've copied it below.
I have an Apple MacBook Pro laptop with Mountain Lion software. I also have an Apple Airport Extreme. My Internet service is AT&T. AT&T just upgraded my service with a new modem/router (AT&T U-Verse). Prior to the conversion, my wireless printer connection was working perfectly.
Now can’t print wirelessly. For your information, everything is connected via Wi-Fi. The AT&T technician stated that I no longer needed my Apple Airport Extreme, so it was removed. Naturally, after the tech leaves, we find out the HP printer wirelessly no longer works. Thinking that removing Airport Extreme may have been the problem, I reconnected it to the AT&T modem/router, however no change.
Ran the HP wireless network test report and it states that HP printer can’t find wireless router and to verify that the HP printer network name (SSID) matches the wireless router network name (SSID) exactly. The Diagnostic Summary in brief: Wireless On & Working & Security – Pass; Network Name (SSID) Found – Fail. Nothing else under diagnostic summary ran. Under Configuration Summary: It shows old SSID name and Mac Hardware Address but no IP Address.
Next ran the Network Configuration Page and everything is enabled except the 802.11 Wireless. It shows status – disconnected. Under general information it states the following: Network status - Offline; Active Connection Type - None; URL(s) for Embedded Web Server – http://0.0.0.0
To be honest, don’t know what this means or where to find. The AT&T tech provided me the new SSID Name and a wireless key number but that’s it. Also I uninstalled and reinstalled via USB. The HP message states can’t find router. At this point, I’ve read your forum and tried everything to reconfigure without success. Any direction or help is greatly appreciated.
Thanks in advance!
Re: Can't connect wirelessly HP Photosmart C4780 to MacBook Pro OSX 10.8.2 Mountain Lion.
I finally figured it out! (Sorry that I'm replying to my own posts btw, but I want to post the solution for anybody else with the SigmaplusEOL1 problem). If you have the SigmaplusEOL1 as your SSID when you print the "Wireless Network Test Report", you do NOT need to return it (I know that's hassle for people). To fix the problem, follow these steps.
1) Unplug your printer.
2) Go to your router's IP address (like 192.168.1.1 or whatever it is for your router).
3) Change the SSID of your wirelss network to "SigmaplusEOL1".
4) For the Security option for your wireless network select none (so that a password is not required to access your wireless network).
5) Power your printer back on and reprint "Wireless Network Test Repor". It should say "No problem found..."
6) The report should also have a the IP Address of the printer (under Configuration Summary at the bottom). Type that IP Address in your browser to get to the printer's settings page.
7) Click the "Network" Tab at the top.
8) Under the "Connections" header in the left pane, click "Wireless (802.11).
9) Click "Start Wizard" at the bottom right.
10) In the wizard, change the SSID and encryption (wep or wpsk) password to whatever you want your wireless network to be. So probably whatever it started out as before you changed the SSID to SigmaplusEOL1
11) Click "Finish" at the end. The page will probably try to keep loading but it won't because you changed the network settings of the printer. Just ignore that
12) Go back to your router's IP address and change the SSID and encryption password to whatever you changed the printer's SSID and password to.
13). Reprint the Wireless Network Test Report. It should say the SSID is the same as your wireless, and everything is good.
That's it. You should be good to go now.
Re: Can't connect wirelessly HP Photosmart C4780 to MacBook Pro OSX 10.8.2 Mountain Lion.
Thank you for your prompt response. This has been a totally frustrating experience. I’ve spent at least 8 hours trying to fix this. My HP problems and your initial steps were identical to mine. I am by no means a tech person and my computer tech knowledge is minimal. However I followed your steps to the best of my ability.
I did get the SigmaplusEOL1 message. I was able to get to Step 6 where the wireless network test report now reads – “HP printer settings do not match your wireless router settings.” So I guess this is a step in the right direction. However unfortunately the Configuration summary message for the IP Address reads – “Not Applicable”. (Note: changing SigmaplusEOL1 to network name knocked out my Internet access. Had to switch back to regular network name to regain access.)
I’m at a loss as to what to do next. Without the IP Address is it possible to move forward? As I stated earlier, I’m not a tech person. As to your steps 7, 8 and 9, I can’t find them on my computer or maybe I’m looking in the wrong places. In System Preferences - Network, I have none of these steps. If you’re referring to Airport Utility, with the changes in Mountain Lion, these steps are no longer there. If you’re talking about Safari, Firefox or HP, now I’m really lost.
Finally, I don’t know if you can answer this or not. If I ever get wireless working, do I still need Airport Extreme or is the AT&T U-Verse modem/router sufficient?
Again thank you for your time and patience.
Re: Can't connect wirelessly HP Photosmart C4780 to MacBook Pro OSX 10.8.2 Mountain Lion.
Unfortunately I am unable to offer any further advice as I only followed the instructions listed on the other page.
Finally, as to having WEP enabled, I don't know. Don't even know where to look. The best that I could determine is that my security is WPA/WPA2 Personal.
I'm truly sorry about all of this. Thank you for your time and patience. After reading all of this and you change your mind, I would understand. -
I have a MacBook Pro bought in dec 2009. Currently has mountain lion osx installed. Worked like a dream until today. Randomly froze, so I restarted it. To find I got a grey screen. It wouldn't start. Also note my DVD drive doesn't work, but mountain lion was installed via App Store anyway.
So here's what I done so far:
tried resetting PRAM - No success
Done disk utility. Disk verified with no errors. I even re formatted disk. - no success starting.
Tried re installing mountain lion via download . It froze halfway installing -no success.
Tried backing up a time machine backup from my USB hard drive. It froze at 1% - no success
Tried booting from safe mode - no success
Tried the command line boot - no success.
Please someone help!Sounds like the hard dre has left the building, Died, in the Sh*tter, Gone to the hard drive resting place in the sky.
Buy a new drive connect it to the system with a SATA to USB adapter and see if you can install Mt Lion on that drive connected externally. If you can then the drive inside your system has failed.
Oh Wait!!!! You have the 2009 model. They are known for bad drive to logic board cables. So it may not be the drive itself but the cable going from the drive to the logic board. Do the same as above then if the system runs OK with the new drive connected externally install it in the system and see if it boots. If it does you are good to go. If it doesn't then it is more then likely the cable that hs failed.
I would suggest you also SAVE a copy of that download of Mt Lion and create a USB install drive from it using Lion Disk Maker, once you get your system up and running. -
I have two Macbooks that are connected to the same Comcast Wi-Fi network modem. One of the computers has become very sporadic in receiving the WI-FI signal while the other is unaffected. Both have same operating system (10.5.8). I have restarted computer, and unplugged and retarted modem on several occassions to no avail--one still works the other inconsistent. Have spent a great deal of phone time with Comcast and they suggest acquiring latest OS. Does anyone know a solution to this problem?
This does not sound to be a router problem...You should try to uninstall and re-install the ethernet adapter/card installed in your computer...Do you have 2 Ethernet Adapter's by any chance...Check the Device Manager, Click on the Start button >>> Settings >>> Control Panel >>> Double click System, go to Hardware >>> Device manager, click on the plus'+' sign next to Network Adapters and see how many Ethernet Adapters are listed...
Also connect that computer straight to your modem and see check if you get the same message,that 'YOU ARE CONNECTED TO MORE THAN ONE NETWORK'... -
I have mac osx 10.6.8 but i cannot update but win i upgriding osx mountain lion tha mac tell me (cheke network ???) I HAVE mac book pro 2011
Instead of getting a wireless card for the Mac Pro, you might want to consider getting an 802.11ac wireless bridge device that would enable you to connect more than one device to it by Ethernet cable and to eventually take advantage of the faster 802.11ac wireless standard.
-
hi - i have recently upgraded to an iphone and find that when i open my MS Outlook on my computer, the emails that were on the iphone get wiped out. Has anyone got a solution to this problem? I'm sure it's very simple when you know the answer! Thanks.
Pay no attention to iinami, the amount of replies to people saying their handsets must have been jailbroken everytime iTunes throws out an error is tremendous. (Clearly you don't need to have any real knowledge to get to level 3 on these forums, let's hope apple's geniuses know a lot more than some of their customers.)
http://support.apple.com/kb/TS3694
Solution below.
Error 9
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software. -
I just set up my Site 5 email account on my iPhone, but there is a delay of over 2 hours for the iPhone to receive the emails. Can anyone provide a solution to this problem?
Hey Garlicdaisy,
Thank you for the follow up.
With iCloud, you can have iTunes automatically download new music purchases to all your devices the moment you tap Buy. You can also access past music, movie, and TV show purchases from any of your devices — wirelessly and without syncing.
For more information, see the following:
Apple - iCloud - All your music on all your devices.
http://www.apple.com/icloud/features/itunes-in-the-cloud/
To download past purchases on your devices, follow these steps:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/HT2519
If you want the benefits of iTunes in the Cloud for music you haven’t purchased from iTunes, iTunes Match is the perfect solution:
Apple - iTunes - Match
http://www.apple.com/itunes/itunes-match/
Thanks,
Matt M. -
My M-AUDIO Keystation Mini 32 stopped working right when I updated to Mavericks. What can I do to fix this?
Only 25 of the 32 keys are working. The last 7 keys are not. I tried to use it on both GarageBand and Logic Pro and it's all the same.I resolved with a very cheap USB hub (a simple gadget I had at home, nothing professional...)
-
Will upgrading to a new OS like Lion or Mountain Lion delete my previous files on my computer? Will I have to back up my files with a hard drive first?
Upgrades do not delete your personal files in the Home folder. But any installation can go bad, so it would be wise to backup your current system to an external hard drive.
Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
Snow Leopard General Requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider;
fees may apply.
6. Some features require Apple’s iCloud services; fees and
terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
or Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mountain Lion - System Requirements
Macs that can be upgraded to OS X Mountain Lion
1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table - RoaringApps.
For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion. -
i have tried everything that is recommended by apple to get my ipod shuffle 4th gen to sync with itunes or even show up on my computer does anyone have suggestions?
Hey Xxx_Dank_xxX,
Have you ever been able to sync your iPod shuffle to iTunes on your computer, or has something recently occurred? Are you working with a Mac or a PC? Without knowing what has been recommended to you, I'm going to start here with the basics troubleshooting for this issue.
iPod shuffle (4th generation): Not seen in iTunes - Apple Support
https://support.apple.com/en-is/HT203407
iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
https://support.apple.com/en-is/HT204095
Regards,
Judy
Maybe you are looking for
-
Spent $50 on a component cable -$50 + brand new tv + iPhone 3g = nothing
I just ( 3 hours ago) purchased an Av component cable (model #MB128LL/B) from the apple store in hingham, MA. After being assured it would work with my brand new Westinghouse flat screen I brought it home and plugged it in. I get a message that says.
-
Background Image in JTable headers
Hi I used the following article http://java.sun.com/products/jfc/tsc/articles/swing2d/index.html to create a background image in my java application and then also how to make the table "see through". I have managed this apart from one small problem.
-
Logistic handling group tab of material master
Hi, We are actually grouping materials based on the picking types, these picking types should be visible in the material master plant data/ stor.2 view under the tab Log. handling group field. Can anybody tell me how do I create these picking types.
-
Does anyone know if one can use a non-dedicated interface (i.e. one through which other traffic flows) for redundancy? I ask this as the pair of 11503's in question will only have the two gig interfaces available, both of their slots filled with SSL
-
Connect as: change default user to connect to server
Hi, I connect to my Windows Home Server which works fine, except that the default account it uses is never the same as the account I log in to my iMac. How can I change the default user it uses to log in to the server? I can, of course, keep using th