I have a big problem here ,,,, my iphone 5 with ios 7.1.1 had a heat came from the right back side from the device that make me unable to hold it while i am using the device .... any body can help me please ?

there are heat came from my right back side from my device and i think that make my battery died faster than i think it stay just for 3 hours and after that it became empty
please anybody respond to my proposal quickly  ..... please

When in use and or charging an iPhone will get warm that is normqal
Too hot to touch is not normal .I would take it to an Apple Store genius bar ,in case the battery has become unstable
Maybe not charge unless you are present

Similar Messages

  • HT204350 hi all i porches apple macbook air model mc-234 serial number W80031NH9A7 but it dont save the cahrge i dont know the reason is here any body to help me please i thing there will not be battery inside but im not sure about it

    hi all i porches apple macbook air model mc-234 serial number W80031NH9A7 but it dont save the cahrge i dont know the reason is here any body to help me please i thing there will not be battery inside but im not sure about it

    Being a 2009 model, it is likely the battery is worn out. Take it to a service center and have the battery replaced.

  • Good day I need the solution to the problem presented my iphone with ios upgrade from 7 to access any app, I get a message that says "log on to itunes to receive notifications"

    Good day I need the solution to the problem presented my iphone with ios upgrade from 7 to access any app, I get a message that says "log on to itunes to receive notifications"

    After the iOS 7.0.2 update words with friends is not working for me either. When I attempt to open the app it just closes itself after a few seconds of being open. This happens every time I attempt to open it.

  • TS2634 I have a very weak wifi signal, any body can help?

    I have a verry week wifi signal, any body can help?

    I have a verry week wifi signal, any body can help?

  • I need Expert Decomposition of classes in Source Code for my reaserch purpose. Any body can help me in this regard?

    <blockquote>Locked by Moderator as a duplicate/re-post.
    Please continue the discussion in this thread: [tiki-view_forum_thread.php?comments_parentId=698286&forumId=1]
    Thanks - c</blockquote>
    == Issue
    ==
    I have another kind of problem with Firefox
    == Description
    ==
    I need Expert Decomposition of classes in Source Code of Firefox for my research purpose. Any body can help me in this regard?
    == This happened
    ==
    Not sure how often
    == Firefox version
    ==
    3.0.19
    == Operating system
    ==
    Windows XP
    == User Agent
    ==
    Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.0.19) Gecko/2010031422 Firefox/3.0.19
    == Plugins installed
    ==
    *-Default Plug-in
    *RealPlayer(tm) LiveConnect-Enabled Plug-In
    *6.0.12.1662
    *Office Plugin for Netscape Navigator
    *Google Update
    *Shockwave Flash 10.1 r53
    *Yahoo Application State Plugin version 1.0.0.7
    *Next Generation Java Plug-in 1.6.0_18 for Mozilla browsers
    *Adobe PDF Plug-In For Firefox and Netscape
    *DRM Netscape Network Object
    *Npdsplay dll
    *DRM Store Netscape Plugin

    Please let me tell you that I Expert Decomposition may be of any Version of Firefox or Thunder Bird.

  • Ussd not Working on my iphone 5 Ios 7.0.3 i am form India , BSNL Carrier  Any one can Help me please . when i dail *123# then can't work its direct dailing.

    Ussd not Working on my iphone 5 Ios 7.0.3 i am form India , BSNL Carrier
    Any one can Help me please . when i dail *123# then can't work its direct dailing.

    Not ony for BSNL, Not working for all carriers in India right from 7.0 , 7.0.1, 7.0.2 and 7.0.3
    Apple needs to work it out in their  upcoming patch , All older versions of iphones from 4 and 4s works perfectly without any flaw  right from 7.0

  • My ipod is disabled and say connect to iTunes when i connect to computer it say enter the pass cod but the ipod browser it's not showing ..any one can help me please, ty

    my ipod is disabled and say connect to iTunes when i connect to computer it say enter the pass cod but the ipod browser it's not showing ..any one can help me please, ty

    Place the iPod in Recovery mode and then restore

  • My ipad is stolen ,, and i want to reopen find my ipad application because as i know once the ipad switched off and switched on again the application needs to be reopened ,, any one can help me please to find my ipad again

    my ipad is stolen ,, and i want to reopen find my ipad application because as i know once the ipad switched off and switched on again the application needs to be reopened ,, any one can help me please to find my ipad again

    Stolen
    http://support.apple.com/kb/HT5668
    Erase iPad
    http://support.apple.com/kb/ph2701
    Lost Mode
    http://support.apple.com/kb/PH2700
    Reporting lost or stolen iPad
    http://support.apple.com/kb/HT2526

  • Hi.. i've got problem with my iPhone 4s gsm factory unlocked it won't connect to a wifi. i tried to hold power and home button even reset the network setting but ended with i am not able even to turn the wifi on. does any body can help me out???

    hi..
    i've got problem with my iphone 4s gsm factory unlocked it won't connect to a wifi. i tried to hold the power and home button even reset the network setting but ended with i am not even can turn the wifi on. does any body can helpme?

    See this: http://support.apple.com/kb/TS1559
    If you carefully follow all of the instructions in this tip and none of them restore WiFi then your radio chip has failed and you need to get the phone replaced by Apple.

  • Mc Book Air 13 won't start up. Any one can help? Please!

    Any one can help please,

    Thanks. Mc Book Air 13. Model A 1369/2011. Charger is connected. I plugged inn the charger and turned off the power button last night before I sleep. It's power on but couldn't log in/strait up. Showing only apple symbol. Thanks for your concerning.

  • I restore my iPhone 4S on iTunes and then when restarted it is asking for valid SIM card and I don't have SIM card for that, I was just using the iPhone with wifi, any one can help? Please.

    I restore my iPhone 4S on iTunes after the restore was completed the iPhone was restarted and now asking for valid SIM card which I didn't,t have and I was using the iPhone with wifi, and now can't use it because the screen is locked for SIM card. Can anyone help me please.
    Thanks,
    David

    wjosten wrote:
    Phil0124 wrote:
    I doubt the phone is locked to GCI in any way
    Well, you're wrong, & in fact not only is it locked, GCI does not offer unlocking for iPhones.
    Fact is your post won't help the OP.
    And you are 100% sure its locked to them? How can you know this? While GCI does not offer unlocking that does not mean the phone is actually locked to it. Get off your high horse.
    Its possible the original owner had an unlocked phone. he was using with GCI. Or that GCI doesn't actually have locked phones. Seeing as they don't even have their own infrastructure but instead use AT&T's I doubt they'd have iPhones specifically locked to them and that would be the reason they do not offer unlocking (because there's nothing for them to unlock). And just to clarify, I'm not saying for a fact its not locked to them. It very well maybe be, but without knowing more about the phone and going by the fact GCI uses AT&T infrastrucure its possible its not locked. But here's no way to say for sure either way.
    Trying a Sim card from AT&T or another carrier might just help the OP if its actually unlocked or locked to AT&T rather than GCI.

  • HT201441 please help me. i buy iphone 4s (used) and the seller not give icloud password n username. i upgrade the iphone to ios 7. Now for activated iphone, i must enter username n password icloud but i dont have it. any body can help me?

    i have iphone 4s (used).
    but the seller not give icloud username & password.
    after i reset and upgarde ios to ios7. iphone cant activated because i dont have icloud password (as information, find my iphone is activated).
    i already go to iphone service center in indonesia, but they cant help me. its so complicated.
    any body help me?

    The only person that can help you is the prior owner with Apple ID and password.
    Without that it is completely worthless.
    If you can't get the Apple ID and password then return for a refund of your money.
    Allan

  • Any body can help me?

    Iam trying to make setup for sakai project.
    I ran "maven sakai" at the command prompt, I am having proxy at my work place. By using the proxy configuration in browser I can able to access the internet. Can you tell me how to access the net through the command prompt or java stand alone application. Below is the error i am getting:
    D:\sakai-src>maven sakai
    | \/ |__ Apache_ ___
    | |\/| / _` \ V / -_) ' \ ~ intelligent projects ~
    |_| |_\__,_|\_/\___|_||_| v. 1.0.2
    Attempting to download sakai-2.1.jar.
    Error retrieving artifact from [http://www.ibiblio.org/maven/sakaiproject/plugins/sakai-2.1.jar]: java.net.UnknownHostException: www.ibiblio.org
    Error retrieving artifact from [http://cvs.sakaiproject.org/maven/sakaiproject/plugins/sakai-2.1.jar]: java.net.UnknownHostException: cvs.sakaiproject.org
    Error retrieving artifact from [http://horde.planetmirror.com/pub/maven/sakaiproject/plugins/sakai-2.1.jar]: java.net.UnknownHostException: horde.planetmirror.com
    WARNING: Failed to download sakai-2.1.jar.
    Attempting to download jakarta-tomcat-5.5.9.zip.
    Error retrieving artifact from [http://www.ibiblio.org/maven/tomcat/zips/jakarta-tomcat-5.5.9.zip]: java.net.UnknownHostException: www.ibiblio.org
    Error retrieving artifact from [http://cvs.sakaiproject.org/maven/tomcat/zips/jakarta-tomcat-5.5.9.zip]: java.net.UnknownHostException: cvs.sakaiproject.org
    Error retrieving artifact from [http://horde.planetmirror.com/pub/maven/tomcat/zips/jakarta-tomcat-5.5.9.zip]: java.net.UnknownHostException: horde.planetmirror.com
    WARNING: Failed to download jakarta-tomcat-5.5.9.zip.
    Attempting to download jakarta-tomcat-compat-5.5.9.zip.
    Error retrieving artifact from [http://www.ibiblio.org/maven/tomcat/zips/jakarta-tomcat-compat-5.5.9.zip]: java.net.UnknownHostException: www.ibiblio.org
    Error retrieving artifact from [http://cvs.sakaiproject.org/maven/tomcat/zips/jakarta-tomcat-compat-5.5.9.zip]: java.net.UnknownHostException: cvs.sakaiproject.org
    Error retrieving artifact from [http://horde.planetmirror.com/pub/maven/tomcat/zips/jakarta-tomcat-compat-5.5.9.zip]: java.net.UnknownHostException: horde.planetmirror.com
    WARNING: Failed to download jakarta-tomcat-compat-5.5.9.zip.
    The build cannot continue because of the following unsatisfied dependencies:
    sakai-2.1.jar
    jakarta-tomcat-5.5.9.zip
    jakarta-tomcat-compat-5.5.9.zip
    Total time: 4 seconds
    Finished at: Mon Dec 12 19:29:07 GMT+05:30 2005
    D:\sakai-src>

    Dear All
    I try to install sakai but
    my system
    1.linux fedora core 3
    2.java
    # java -version
    java version "1.4.2_11"
    Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_11-b06)
    Java HotSpot(TM) Client VM (build 1.4.2_11-b06, mixed mode)
    3.maven
    # maven -v
    | \/ |__ Apache_ ___
    | |\/| / _` \ V / -_) ' \ ~ intelligent projects ~
    |_| |_\__,_|\_/\___|_||_| v. 1.0.2
    and add " export MAVEN_OPTS="-Djava.net.preferIPv4Stack=true" " to
    /etc/profile
    4.tomcat
    apache-tomcat-5.5.15.tar
    and i run command and has error below
    # maven sakai
    | \/ |__ Apache_ ___
    | |\/| / _` \ V / -_) ' \ ~ intelligent projects ~
    |_| |_\__,_|\_/\___|_||_| v. 1.0.2
    Attempting to download sakai-2.1.jar.
    Error retrieving artifact from [http://www.ibiblio.org/maven/sakaiproject/plugin
    s/sakai-2.1.jar]: java.net.NoRouteToHostException: No route to host
    WARNING: Failed to download sakai-2.1.jar.
    Attempting to download jakarta-tomcat-5.5.9.zip.
    Error retrieving artifact from [http://www.ibiblio.org/maven/tomcat/zips/jakarta
    -tomcat-5.5.9.zip]: java.net.NoRouteToHostException: No route to host
    WARNING: Failed to download jakarta-tomcat-5.5.9.zip.
    Attempting to download jakarta-tomcat-compat-5.5.9.zip.
    Error retrieving artifact from [http://www.ibiblio.org/maven/tomcat/zips/jakarta
    -tomcat-compat-5.5.9.zip]: java.net.NoRouteToHostException: No route to host
    WARNING: Failed to download jakarta-tomcat-compat-5.5.9.zip.
    The build cannot continue because of the following unsatisfied dependencies:
    sakai-2.1.jar
    jakarta-tomcat-5.5.9.zip
    jakarta-tomcat-compat-5.5.9.zip
    Total time: 22 seconds
    Finished at: Fri Apr 21 09:16:46 ICT 2006
    any body help me please
    thank

  • I have forgot my password and need help. I have not synced my device with a computer so I can not restore it if any body can help please tell me. Thanks

    i forgot my passcode and have not snyced to a computer so I can not restore. Please help

    If you don't remember your iPad's passcode, you have to restore it as a new device.
    Read iOS: Forgot passcode or device disabled
    The passcode is quite secure. It would not be worthwhile to have one otherwise.

  • Flex List with data-grid issue any body can help me ......i added the full code below

    Thanks in advance
    Exactly wat i need is
    1.if i click the open button want to visible all datagrid ,its working perfectly.
    2.if i click the close button want to close all data grid ,its working perfectly.
    3. if i click a particular  list means want to visible particular datagrid..some times working good but some times not visible ...
    4.if i click the list if datagrid already open means want to close .some times creates extra space below the datagrid........
    if u cont get clearly please copy the below code and check it.......any other way to solve this problem?.......
    <?xml version="1.0" encoding="utf-8"?>
    <s:Group xmlns:fx="http://ns.adobe.com/mxml/2009"
    xmlns:s="library://ns.adobe.com/flex/spark"
    xmlns:mx="library://ns.adobe.com/flex/mx" width="100%" height="100%" >
    <fx:Declarations>
    </fx:Declarations>
    <fx:Script>
    <![CDATA[
    import mx.collections.ArrayCollection;
    [Bindable]
    public var ArrUserList:ArrayCollection;
    [Bindable]
    public var listDB:ArrayCollection = new ArrayCollection([ {label: "2011", data:"jan",day:"saturday",date:"1-4-11"},
    {label: "2011", data:"jan",day:"monday",date:"13-4-11"}, {label: "2013", data:"jan",day:"monday",date:"1-5-11"}, {label: "2013", data:"jan",day:"wednesday",date:"14-5-11"}, {label: "2015", data:"jan",day:"tuesday",date:"11-5-11"}, {label: "2015" ,data:"jan",day:"friday",date:"1-6-11"} ]);
    public var loc_first_last_name:String;
    function Load():void
    ArrUserList=Find_Duplicate(listDB);
    for(var i:int=0; i<ArrUserList.length; i++)
    ArrUserList[i].click=0;
    Lst_userlist.dataProvider=ArrUserList;
    Lst_userlist.rowCount=ArrUserList.length;
    function Clink_lnk_open():void
    if(lnk_open.label=="Open")
    for(var i:int=0; i<ArrUserList.length; i++)
    ArrUserList[i].click=1;
    lnk_open.label="Close";
    ArrUserList.refresh();
    Lst_userlist.validateNow();
    Lst_userlist.dataProvider=ArrUserList;
    Lst_userlist.rowCount = ArrUserList.length ;
    else
    for(var i:int=0; i<ArrUserList.length; i++)
    ArrUserList[i].click=0;
    lnk_open.label="Open";
    ArrUserList.refresh();
    Lst_userlist.validateNow();
    Lst_userlist.dataProvider=ArrUserList;
    Lst_userlist.rowCount = ArrUserList.length ;
    function Click_UserName1(event:MouseEvent,data:Object):void
    loc_first_last_name=event.currentTarget.text;
    var str:String;
    for(var i:int=0; i<ArrUserList.length; i++)
    str=ArrUserList[i].label;
    if(loc_first_last_name==str)
    if(ArrUserList[i].click == 0)
    ArrUserList[i].click=1;
    else
    ArrUserList[i].click=0;
    ArrUserList.refresh();
    Lst_userlist.validateNow();
    Lst_userlist.dataProvider=ArrUserList;
    Lst_userlist.rowCount=ArrUserList.length;
    public function Find_Duplicate(test_arr:ArrayCollection):ArrayCollection
    var res_arr:ArrayCollection=new ArrayCollection();
    var flag:Boolean;
    for(var i:int=0;i<test_arr.length;i++)
    var j:int=0
    flag=false;
    for(;j<res_arr.length;j++)
    if(res_arr[j].label==test_arr[i].label)
    res_arr[j].dataCollection.addItem(test_arr[i]);
    flag=true;
    break;
    if(!flag)
    var myItem:Object = new Object() ;
    myItem.label=test_arr[i].label;
    myItem.dataCollection=new ArrayCollection();
    myItem.dataCollection.addItem(test_arr[i]);
    res_arr.addItem(myItem) ;
    return res_arr;
    ]]>
    </fx:Script>
    <s:Scroller id="id_scroller" width="100%" height="100%">
    <s:VGroup id="id_Vgroup" paddingLeft="50" paddingTop="10" paddingBottom="10"   width="100%" height="100%" >
    <mx:VBox width="850" paddingLeft="0" paddingTop="1"    color="black"  backgroundColor="#FFFFFF">
    <mx:HBox width="850" left="50" paddingBottom="3"  paddingLeft="5" backgroundColor="#6D6C6C"   paddingTop="3" color="#FFFFFF" >
    <mx:LinkButton id="lnk_open" label="Open" textDecoration="underline" click="Clink_lnk_open();"/>
    <mx:Button id="load_btn" label="Load" click="Load()"/>
    </mx:HBox>
    <mx:VBox id="Vbox_main" width="850"   horizontalScrollPolicy="off" verticalScrollPolicy="off"  >
    <mx:List variableRowHeight="true"   width="850" id="Lst_userlist" paddingTop="-3" verticalScrollPolicy="off"  horizontalScrollPolicy="off"
    buttonMode="true"  >
    <mx:itemRenderer>
    <fx:Component>
    <mx:VBox paddingTop="-5"  horizontalScrollPolicy="off" verticalScrollPolicy="off" >
    <fx:Script>
    <![CDATA[
    import mx.collections.ArrayCollection;
    override public function set data(value:Object):void
    super.data = value;
    Membership_Grid.dataProvider=data.dataCollection;
    Membership_Grid.rowCount=data.dataCollection.length;
    lbl_userhead.text=data.label;
    lbl_userhead1.text=data.dataCollection.length+" Datas";
    if(data.click==1)
    Vbox_main.visible=true;
    Vbox_main.includeInLayout=true;
    else
    Vbox_main.visible=false;
    Vbox_main.includeInLayout=false;
    Membership_Grid.validateNow() ;
    ]]>
    </fx:Script>
    <mx:HBox id="vbox_grid"  horizontalScrollPolicy="off"  height="25" verticalScrollPolicy="off" width="850"  paddingLeft="10" paddingTop="5"  backgroundColor="#6D6C6C" color="#FFFFFF">
    <s:Label id="lbl_userhead" click="outerDocument.Click_UserName1(event,data)" buttonMode="true"   width="250"  paddingTop="3" />
    <s:Label id="lbl_userhead1"  buttonMode="true"   width="548" paddingTop="3" />
    </mx:HBox>
    <mx:VBox id="Vbox_main" width="850" horizontalScrollPolicy="off" verticalScrollPolicy="off"  visible="false" includeInLayout="false" >
    <mx:DataGrid id="Membership_Grid"   alternatingItemColors="[#DCDCDC,#F8F8FF]"  paddingLeft="5"  horizontalScrollPolicy="off" color="black"
    horizontalGridLines="false" verticalScrollPolicy="auto"  verticalGridLines="false"  rowHeight="25" width="850"  borderSkin="{null}"
    borderVisible="false" >
    <mx:columns>
    <mx:DataGridColumn width="150" headerText="Year" dataField="label"/>
    <mx:DataGridColumn width="150" headerText="Month" dataField="data"/>
    <mx:DataGridColumn width="150" headerText="Day" dataField="day" />
    <mx:DataGridColumn width="150" headerText="Date"  dataField="date"/>
    </mx:columns>
    </mx:DataGrid>
    </mx:VBox>
    </mx:VBox>
    </fx:Component>
    </mx:itemRenderer>
    </mx:List>
    </mx:VBox>
    </mx:VBox>
    </s:VGroup>
    </s:Scroller>
    </s:Group>

    Hi
    Sir am using flex 4.0.1     SDKS 4.1.0....
    Still i cont fix this problem....i have the same prob in many mxml files .any alternate solution for my prob pls let me know...
    Thanks in Advance,
    senthil.

Maybe you are looking for

  • My appstore gift card code is not working? what do i do?

    hello, yesterday i purchased an appstore gift card from jb-hi-fi so i could buy things from the appstore, later that night i tried entering the code and it is not working some of the letter/numbers are hard to read and it keeps sayig the code is not

  • To mount a CD-ROM in Single User Mode.  How?

    Thank you for reading my question.  I need to run single user mode on my iMac because of a disk problem.  I would like to be able to mount the cd drive while I am in single user mode.  I would also like to be able to mount usb hard drives with confid

  • Aol on iPad2

    I have been using aol as my email and only recently I have found that I can't send emails but can receive them. I have cancelled and reinstalled but this did not work. Can anyone help?

  • Ho to get the structure for a subnode

    Hi Experts, I am an beginner in webdynpro abap - sorry for this simple question, but I have not found an answer. I have a context node generated from a interactive form. Let's call this node 'node1'. Within this node I have a subnode 'subnode1' conta

  • Vulnerabilities noted in Security Audit

    Hi all, I am running the following ASA 5510 Cisco Adaptive Security Appliance Software Version 8.4(5) Device Manager Version 7.1(3) We were recently audited by an outside firm and was givena couple vulnerabilities they saw which were: 1. Web Page wit