I have a black screen on my 5S.
I have a black screen on my 5S. I tried to renew the software, but every time tha message fault 40 appaers. What is that and how can I repair it.
Check for hardware issues
Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers.
jwhbos wrote:
I tried to renew the software, but every time tha message fault 40 appaers.
If using windows...
Temporarily disable your firewall and antivirus software and try again...
http://support.apple.com/kb/TS1379
See iTunes Connection Issues here...
iTunes for Windows: Troubleshooting security software issues
Similar Messages
-
I have an iphone 4S why does it have a black screen instead of my background picture when I get a text message?
When you see the old number come up in the suggested choices look for a blue arrow to the right of the Contact. Tap the blue arrow and then tap Remove from Recents.
-
I have an ipod touch that continues to have a black screen with the white apple on it. It won't shut off and is completely frozen. This happened when we tried to restore it last night. Help please!!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My iPad was upgraded to iOS 8.3 software while plugged in. This morning, the battery is almost dead, and I have a black screen. Not sure the iPad is even charging! Any thoughts on what to do? Thanks.
The update is iOS 8.1.3 not iOS 8.3.
Have you tried resetting your iPad?
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds).
No data will be lost. -
having problems watching a tv series on iTunes on my macbook pro. bought from iTunes on this device but when i go to play it all it does is have a black screen and nothing happens or plays at all. any suggestions?
Hello toddy7,
Thank you for using Apple Support Communities.
For more information, take a look at:
iTunes: How to install the latest version
http://support.apple.com/kb/ht5654
Mac: Choose iTunes > Check for Updates.
Have a nice day,
Mario -
Just upgraded my iPad to IOS5 and when the download was completed, a window said that there was an error and it could not restore. Now I have a black screen with the Apple logo and the circle lines. None of the buttons respond. Help, please!!
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. Maybe this will let the iPad reboot and then you may need to restore again but see if this helps to start the iPad first.
-
while in email today, the computer began flashing. I had to turn off with button. When I turned it back on, I got the apple icon and the moving loading wheel. It would turn for about 60 seconds and then stop. I turned off again. I now have a black screen.
Hi wiesenruth,
If you are having issues starting up or booting your computer, you may find the following articles helpful:
Troubleshooting: My computer won't turn on
http://support.apple.com/kb/TS1367
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/ts2570
Regards,
- Brenden -
MacBook Pro (Late) 2008 running 10.8.4
I was using my computer every morning as I do everyday with no issues. I had left home for most of the day. Closed lid and while I was gone for a couple of hours. I returned home, opened my MacBook and nothing but a black screen. I've tried many things all evening try and fix this problem out of "safety sleep mode, and other similiar tricks that other people had tried.
I still have a Black Screen and cannot get my macbook out of what seems to be the sleep mode.
I've done a master reset and after I restart, I do get the power up chime but still a black screen. I don't know what else to do. Please help. Should I bring computer to a local repair shop or is there something I can do to fix myself. I just don't know where to start.
Thank you.
SusanGenius reservation http://www.apple.com/retail/geniusbar/
on-line https://getsupport.apple.com/GetproductgroupList.action
check warranty https://selfsolve.apple.com/agreementWarrantyDynamic.do -
i plugged in my iphone 5S and locked the screen 20 minutes later I tried to open the phone it will not turn on i treid reset and that wont work I have a black screen,
I tried just holding down the power key...NOTHINGDo a reset, hold down the home/sleep button together until you see the apple logo and then release.
-
I just updated my Ipad to I0S 7.02 like it asked me too. Now i have a black screen Itunes logo and a picture of the plug in cord. I can't get to my home screen. What happened?
You are in Recovery Mode. Follow the instructions below to recover your iPad.
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost. -
I have a iPod classic 2gb. I haven't used in years and I charged it for 3 hours and it won't turn on and I tried resetting and nothing. I plugged it into iTunes and iTunes doesn't even recognize it. I just have a black screen. PLEASE HELP!!!
I'm sorry it's a nano 2gb silver
-
Why do I have a black screen when I merge to HDR from Bridge?
Why do I have a black screen when I merge to HDR from Bridge?
Back up all data.
Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again. -
Why do I have a black screen with the icon spinning round and won't open?
why do I have a black screen with the icon spinning round and won't open my photos?
Because there is a problem. Want to try fix it?
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD -
HT1752 I have a black screen and I hear 6 hissing sounds durring start-up on my mac
I have a black screen and I hear 6 hissing sounds durring start-up on my mac, I have an old 1999 (possibly G5 PPC)Imac computer
Blank (lighted, but black) screen with cursor at bootup
[SOLVED] - Macbook Air Sleep/Wake problem
Dark screen on start-up can only see curser -
TS3718 I have a black screen when trying to Face Time...iOS is 5.1.1...any suggestions?
I have a black screen when trying to Face Time ...iOS is up to date..any suggestions?.
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
Cheers, Tom
Maybe you are looking for
-
How to convert the customized report sales price list into excel sheet
hi friends, i am faceing the probulem in VK13 report is not conveting into excel sheet, then i developed the one customized report, in this report i am using the tables are a506, konp,and makt, result is coming and it converted into excel sheet in my
-
IPod touch 3rd generation not charging
I got the ipod about 4 years ago and now it doesnt charge any more. If I want to charge it I have to push up or down but I only did that once because I dont want to damage it any more. Also awhile ago There was a little piece that came out of the cha
-
DMS Document Attachment for Z Transactions
Dear All, I have a Z transaction ( Module Pool ) , its getting used for some customer business process which is not mapped in sap. now my user requirement is that he wants to attach some documents ( diff types ) to that ztransaction like DMS function
-
Is is possible to run aggregate queries (cf SQL's "group by") on a CQ5 repository?
I am trying to produce a report of how many images were added to our crx repository (under cq 5.3) in the last year, by the directory to which they were added. In SQL I'd do something like SELECT COUNT(*) FROM image WHERE image.date >= '2012-01-01
-
hI all, I use tomcat before and I use port 80 now I wan to add apach, since the defaul por tis 80 too, so I uninstall tomcat, but when I open my appach I still have can't listen to port 80, is be used ,why?? Thank you