I have a blank area at the end of my timeline

I have just cut a 20 min movie to a 13 min movie and at the end of my timeline is apprx. 3 min of nothing. The movie also stalls uot while I am playing it, stills up and continues playing. I also have several photo clips from photo shop inserted.
When I share with idvd, the audio is not there.
I did add new music that is an mpeg3, but the movie audio is not there either? Any ideas. I need to burn by DVD's today.

IOS 7 not designed to run on iPhone3G. Will run on iPhone 4 and newer.

Similar Messages

Implementing multiple page size requirement - extra blank page at the end

My XMLP report requirement is as follows.
- The report is printing a bunch of lines.
- Based on data and layout requirement, lines are grouped into page where they belong (due to complex logic for determining which page a line should go to...this is done in PL/SQL package that is called in the beginning of the RDF trigger)
- The first page needs to be printed on Legal size paper
- Subsequent pages (IF NEEDED) need to be printed on Letter size paper
So some report will have a 1-page output (legal size), and some will have multiple pages (1st page should be legal size, subsequent on letter size).
Here is a sample XML data:
<REPORT>
<LIST_G_PAGE_NUMBER>
<G_PAGE_NUMBER>
<PAGE_NUMBER>1</PAGE_NUMBER>
<LIST_G_LINE>
     <G_LINE>...</G_LINE>
     <G_LINE>...</G_LINE>
</LIST_G_LINE>
</G_PAGE_NUMBER>
<G_PAGE_NUMBER>
<PAGE_NUMBER>2</PAGE_NUMBER>
<LIST_G_LINE>
     <G_LINE>...</G_LINE>
     <G_LINE>...</G_LINE>
</LIST_G_LINE>
</G_PAGE_NUMBER>
<G_PAGE_NUMBER>
<PAGE_NUMBER>3</PAGE_NUMBER>
<LIST_G_LINE>
     <G_LINE>...</G_LINE>
     <G_LINE>...</G_LINE>
</LIST_G_LINE>
</G_PAGE_NUMBER>
</LIST_G_PAGE_NUMBER>
</REPORT>
For this, I created 2-pages RTF template and using the Word Page Setup feature:
1. First page setup is legal size (go to Page Setup, Paper tab, choose Letter and choose Apply to "Whole Document").
The first page has the following XMLP tag:
<?for-each: G_PAGE_NUMBER?>
<?if: PAGE_NUMBER=1?><?call:body?><?end if?>
<?end for-each?>
<?template:body?>
for-each loop that prints lines in a tabular format
<?end template?>
2. Second page setup is letter size (go to Page Setup, Paper, choose Letter and choose Apply to "This point forward").
<?for-each: G_PAGE_NUMBER?>
<?if: PAGE_NUMBER>1?><?call:body?><-- Ctrl-Break to insert a page break here --> <?end if?>
<?end for-each?>
It almost worked, except there is a blank page printed at the end. How do I remove the blank page? I have tried to use <?split-by-page-break:?> instead of the Ctrl-Break, but it did not seem to work (there is no page break happening at all).
I think the extra page is due to the multiple page nature of the RTF template. Is there a way to control the page size through XMLP tag (or XSL-FO). With that, I can try having a single page template and put the page size control within the XMLP / XSL-FO tag and hope that the extra blank page at the end will go away. Can someone please help?
Thank you!

Sorry for the typo in my previous post... I meant Ctrl-Enter (not Ctrl-Break).

How to avoid printing an additional blank page at the end of the report

I have a report which has 3 panels in the main section of the report, about 3 pages in size. 1st & 2nd panels are enclosed in a repeating frame, and 3rd panel in a different repeating frame.
The vertical panels per page in the property inspector of the main section of the report is kept as 2. And thus, when I am printing the report I am getting an additional blank page at the end. Also I tried to make the vertical panels per page to 1 in the property inspector for main section but the following error is being returned:
REP-0801: Layout canvas must remain large enough to fit all layout objects
Can anyone tell me how to handle this?

Hi,
I too faced similar prob.
But when i made the After Page Value property of the report as blank it removed the blank page for me .
Try this and let me know whether it has helped you.
Regards
Srinivas Pusa

Blank Page at the end of the report

Hi
In my report i did not have any pagebreak or section break.
But some times i am getting extra blank page at the bottom of the report .
How to avoid this ..
Thanks in Advance
Have a Nice day.

Hi,
It is very probable that you are have unncessary space somewhere before the end of your template.
Use Ctrl+Shift+* to show the end of line markers and remove the unnecessary spaces in your
template then run again the view report.
cheers
Jorge
p.s If your question was answered then please grant the points and close the thread

Problem with a blank page at the end.

Hi,
I have a report. That comes up with a blank page at the end of the report when the report generates the output in the report builder. Also in pdf file.
It was created by somebody earlier... and i need to fix this bug.
Any solutions..?
Thanks in advance.
KK
Message was edited by:
KK28

Hi
there are a number of hits on Metalink for this...
Subject:      Extra Page Shown At The End Of A Web Report
     Doc ID:      Note:172426.1      Type:      PROBLEM
     Last Revision Date:      04-JAN-2005      Status:      ARCHIVED
* fact: Oracle Reports Developer 6.0.5
* fact: Solaris Operating System (SPARC)
* fact: Microsoft Internet Explorer
* fact: Adobe Acrobat
* fact: OAS
* symptom: Extra Page Displayed At The End Of A Report Viewed on the Web
* symptom: Only happens on one report
* symptom: Using Times New Roman
* symptom: Client/Server configuration works successfully
* change: Report originally created for client/server application was moved to a web application without making any coding changes in the report.
* cause: Bug 1386820 : HTML GENERATED ON NT AND UNIX IS DIFFERENT. ADDITIONAL BLANK LINES ON UNIX
fix:
Use the Report Builder on Unix to make fine adjustments in the layout to
improve the HTML output.
-----x------------------
Subject:      How to set the number of rows per page dynamically in a report
     Doc ID:      Note:122714.1      Type:      SCRIPT
     Last Revision Date:      07-NOV-2000      Status:      PUBLISHED
PURPOSE
This article shows how to set the number of rows per page dynamically according
to the user parameter specified.
INSTRUCTIONS
Follow these steps:
1. In the Object Navigator under Data Model-->User Parameters, create an user
parameter P_1 -- this parameter specifies the number of rows you want to
print per page
datatype: number.
2. In the Data Model Editor, create the query and the layout according to your
requirements.
Let's assume that we have the following:
Q_1: Select empno, deptno ename from emp
order by deptno, ename
G_1 has the columns empno, deptno, ename
3. In the Data Model Editor, create the following summary columns:
CS_numrow will be numbering the rows within the detail group
(created within G_1).
Set the following parameters:
Name: CS_numrow
Function: count
Source: <any column that does not accept nulls> for instance, empno
Reset at: Report
CS_total_rows will calculate the total of rows retrieved
(created at the report level)
Set the following parameters:
Name: CS_total_rows
Function: count
Source: <any column that does not accept nulls> for instance, empno
Reset at: Report
4. In the Layout Model Editor, create a Group Frame M_1 within the repeating
frame, below the fields empno, deptno, and ename. You may have to stretch
the existing frames to be able to fit this in.
F_enmpno F_deptno F_ename
--------------------------------------------- <<<< create the group
frame here
5. Set the properties for the Group Frame M_1 as follows:
Print condition: First
Object: Enclosing Object
Sizing:
Vertical: variable
Horizontal: fixed
Check the box "Page Break before".
6. Create a Format trigger for this frame M_1 as follows:
function M_1FormatTrigger return boolean is
/* prints until a row number is product of P_1 */
/* if row number is 5 and P_1 = 5, MOD is 0 */
/* then it prints the frame, doing a page break */
begin
if :CS_total_rows <> :CS_numrow then -- avoiding blank page at the end
if mod(:CS_numrow,:P_1) = 0 then
return (TRUE);
else
return(false);
end if;
else
return (false);
end if;
end;
NOTE: This assumes that the report is tabular. If you have a break group, this
logic can be applied for the detail group.
REFERENCES
Information in this article was taken from Oracle Sample Code @ Repository
Entry #956. In order to request the binary (rdf file or .sql script), please
log a TAR via Metalink requesting Oracle Sample Code #956
CAUTION
The sample program in this article is provided for educational purposes only
and is NOT supported by Oracle Support Services. It has been tested
internally, however, and works as documented. We do not guarantee that it
will work for you, so be sure to test it in your environment before relying
on it.
-------x-------------
the list goes on...
Hope this helps

SMS Messaging: Blank line at the end of the message

I never had this problem with the 3G, but on my iPhone 4, I often see a blank line at the end of my text message after I send it.
Also, a similar issue I am having is that while I am drafting text messages, the words fits nicely in the text input box, but once I hit send, some words are shifted to the next line.
*Typed in input box:*
Sorry. We'll be there asap.
*Show in the green bubble:*
Sorry. We'll be there
asap.
Anyone know how I can solve this problem? Thank you!

this isnt the way to respond to someones problem... thats not what this forum is for ..
now to the op have you tried resetting your phone by holding both the home button and the sleep/wake switch for 15 seconds...
if that doesnt work I would try restoring your phone from backup to see if you can clear this issue up

IDoc to file - how to delete a blank record at the end of the file.

Hi,
My senario is IDoc to file. I have successfully implemented this using FCC. But when i checked the flat file, it has a blank record at the end of the file( i think PI adds one blank line/record at the end of the file). Please suggest me What i need to do, to delete the blank record .
Thanks & regards
Sreeni

Kindly Check below.
Check whether the problem is at mapping level of adapter level.. to do this count no. of rows/IDOC before mapping and after mapping in IE and no. of rows in the output file.
Thnx
Subbu

Blank Page at the end of report(html output)

Hi,
I have created a paper layout report using report 10g.
DESFORMAT for the report is html.
when i take a print out of the report from internet explorer its printing a blank page at the end.
I tried with BLANKPAGES=NO it didn't help me and even unchecked the Blank Pages property in Report Builder tool.
Please help me in resolving this issue.
Regards
Srinivas.

Many thanks. That works

How to find out which objects are at the end of the datafiles

My Scenario is having a tablespace of 65G but the data is 5G and that is at the end of datafile for that we are not able to resize the datafile our though is to find out what are the objects at that end of datafiles and will either alter move <owner.tablename> move or alter index <owner.index> rebuld online.
For that how to find out which objects are at the end of the datafiles.

>
My Scenario is having a tablespace of 65G but the data is 5G and that is at the end of datafile for that we are not able to resize the datafile our though is to find out what are the objects at that end of datafiles and will either alter move <owner.tablename> move or alter index <owner.index> rebuld online.
For that how to find out which objects are at the end of the datafiles.
>
You may want to copy this and add it to your toolkit
See 'What's at the End of the File?' in this Tom Kyte article from the Sept 2004 Oracle Magazine
http://www.oracle.com/technetwork/issue-archive/o54asktom-086284.html
And this AskTom blog shows you how to generate a script containing ALTER statements toresize your datafiles to the smallest possible. You can 'pick and choose' from the ALTER statements to do what you want.
Then of course, you can use techniques from this article by Oracle ACE, and noted author, Jonathan Lewis
http://jonathanlewis.wordpress.com/2010/02/06/shrink-tablespace/

Creating PDFs of drawings from ArcMap results in blank areas on the PDF

I generate maps in ArcMap and when I make PDFs of the maps I get white or blank areas in the resulting PDF unless I generate it in High Quality mode. Anyone know what causes this?

Hey Jason Smith,
Please let me know what exact Acrobat version are you using.
You might need to go to 'Edit> Preferences> Page Display' and check mark Show large images" option under Page Content and Information section.
Then check and let me know.
Regards,
Anubha

I have a blank screen with the spining circle. doesn't respond to anything

i have a i touch runing newest software 10.5? i have a blank screen with the spining circle. doesn't respond to anything, ie...holding the on off switch
or the home button for 10 seconds

Hi,
If the site has been bookmarked, you can try to check if '''Load this bookmark in the sidebar''' has been enabled (tick) in the [https://support.mozilla.org/en-US/kb/how-do-i-use-bookmarks?s=bookmarks&r=0&e=sph&as=s Bookmarks Library]: '''Bookmarks''' > '''Show All Bookmarks''', search for the site on the top right search box, select the site and click on the arrow beside '''More''' on the bottom.

I hooked up my iPod to the computer and opened iTunes and now all my music is gone. I have greyed out areas where the music is supposed to be. Can I get my music back?

I hooked up my iPod to the computer and opened iTunes and now all my music is gone. I have greyed out areas where the music is supposed to be, but it says that I still have the same number of songs as I did before. Can I get my music back?

Grayed out whee? Computer? On iPod?
If in iPod that means the music files got corrupted and are lost.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Blank Page at the end of generated PDF Document

Hi,
my problem is that ADS is generating a blank page at the end of my report.
I fill the ADS with a template and an XML stream.
The XML stream contains multiple orders. Each order has several detail data. It is a requirement that every order object has to appear at a new page.
XML structure:
- Order
-- Group1
--- fields of Group1
-- Group2
--- Fields of Group2
My template looks like this:
- body page subform: Order (Default binding: $record.Order[*]; Repeat Subform for Each Data Item: yes; After: Go To Next Page)
-- subform1
--- fields of subform1
-- subform2
--- fields of subform2
Because of the "Go To Next Page" at the Order subform a new page is rendered each time an order ends. This leads to the blank page after the last order is processed.
Does anyone know how I can suppress the blank page at the end of the document?

You may use a forum for xsl fo.

Email attachments I receive have numbers and brackets at the end of the file names

Sometimes the email attachments I receive have numbers and brackets at the end of the file names, please view the screen shot attached. Any idea what causes this? Mac OSX 10.8.5 and Mac Mail v6.6

E-mail the sender and see if that is how the attachments looked when attached.

Can't pull a clip onto the end of my timeline ... (1st time on iMovie) One of the clips has an orange highlight on it. Is this causing the problem?

Can't pull a clip onto the end of my timeline ... (1st time on iMovie) One of the clips has an orange highlight on it. Is this causing the problem?

Ahhh, now I see the problem, Grasshopper. Problem is, we are all Grasshoppers, here.
Yes, that little piece of info is critical. I'd say the biggest difficulty with FCPX is the whole new language.
If I read you correctly, your Audio is in the Main Storyline (Track 1 in plain old Editorese). This makes anything else you add (above or below) a "connected clip", which we can no longer think of as "Track 2" because Jobs sez so. So, yes, you cannot just add a transition to either end of a connected clip.
No argument with Tracy's solution, because I haven't seen any other general solution presented for any attempt to treat connected clips as the main storyline. And, of course, when they were "track 1" and "track 2", you could.
An alternative solution, however, is to highlight the connected clip and press Ctrl-V to bring up the Video Animation Editor. Click the "reveal button" for Compositing: Opacity (bottom, right). Once open, there is a "fade handle" to the right top. Drag it left for however much fade you wish. (there is one on the left as well, but you were only talking about a fade-out.)
A second alternative, perhaps for future projects where everything keys on audio, may be to create a Gap clip (used to be called slug) in the primary storyline before ever dropping in the audio. Then you can add video to the main story line and modify it without having to go thru hoops to do the simplest thing.

I have a blank area at the end of my timeline

Similar Messages

Maybe you are looking for