I have a brand new Ipod nano never been opened. Could I exchange and get money off for ipad at an apple store?

I have a brand new Ipod nano that has never been opened. It was a gift.  Could I exchange it and get money off for an ipad at an apple store?

No.  The most you can do is turn it in your a 10% discount towards the purchase of a new one.  You would be much better off selling the Nano on Craigslist or eBay and using the profits from that towards the purchase of an iPad.
B-rock

Similar Messages

  • I have a brand new ipod nano and I am wondering why it stops playing music if I let it sit to long with out pressing the stop and it has a battery life

    So I just got an Ipod nano from apple and I decided to pop it in and listen to it but if I do not use the touch screen for more than like a minute, it turns itself off and stops playing music. why?

    This is usually an indication that the headphones are not plugged all the way in. The white part of the headset should be flush with the Nano and no silver from the jack should still be seen.  The newer headphone jacks on the 6G Nanos are a bit tighter than in previous generations and require just a bit of extra force to pop them all the way in.
    B-rock

  • I have a brand new iopd nano and it will conect to my laptop but when itunes opens it disconects ipod :-(

    I have a brand new ipod nano that will conect to pc but when i open itunes it disconect and itunes error msg....ipod has been detected but cannot be indentified properly. I have uninstalled and reinstalled itunes and spent hours trying to access itunes with my ipod . I am not very cluey with PC as my daughter gave me both laptop and ipod as gifts :-) Please help :-(

    Hello Lea64,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iPod nano: Error message saying that iPod 'could not be identified properly'
    http://support.apple.com/kb/ts3218
    Verify that your computer meets the minimum system requirements
    Verify that iTunes is installed and updated
    Restart the computer
    Verify that Apple Mobile Device Support is installed
    Verify the device's USB connection
    Verify that the Apple Mobile Device Service and iPod service are both running
    Verify that the Apple Mobile Device Driver is installed
    Remove and reinstall iTunes
    Best of luck,
    Mario

  • My brand new ipod Nano is not being reconised on itune.I changed to the new itunes and now there is nothing on the left hand side as before and it just has the music. Help!

    My brand new Ipod Nano is not being recognised on itunes and i cannot download music onto it.
    \i changed to the new itunes and now there is nothing on the screen other than the music ie no options.
    help please!

    Try a different cable. And are you connecting directly to your computer or through a USB hub?

  • Can't see brand new iPod Nano in Windows!!!

    I just bought a brand new iPod Nano (2nd Gen) for my daughter for Christmas, and right out of the box it would not be recognized by Windows XP or iTunes -- even though another iPod Nano (1st Gen) that we own did connect. It was charging though.
    I used this forum looking for answers and although helpful, there was an awful lot of misleading advice. I finally called the help line 1-800-275-2273 on this website http://www.apple.com/support/contact/
    What I was told was to simply go through the reset process (which I had ignored because it seemed too simple). The steps are to flip the hold button a couple of times and then hold the menu and select (center) button down at the same time for 10 seconds. The iPod will power back up and be reset.
    What this tells me is that Apple has a problem with the software originally loaded on these iPods, but at least this simple procedure solved the problem. I thought I would come back here and provide you with the solution to this problem -- hopefully saving you a lot of time! Good luck!!

    I agree with you, Apple to me has some type of problem with their iPods. I've used some type of computer device since 1971, and in all this time, I have never used a device such as the iPod with so many quirks.
    I tell you one thing the iPod makes you think!!! O;-D
    I'm afraid to buy Apple Care because during the 1st year of owning an iPod you get support that really is not much help. Within the 1st year of owning an iPod, a customer can purchase the Apple Care Plan. The Apple Care Plan is only 2 years, and then you are on your own. If Apple had confidence in their iPod's, they would offer a longer warranty period.
    The only thing I see Apple Care is good for is that if something catastrophic happen, they will pay for shipping and any parts that are needed to fix it.
    Their stock is doing great. Where is the money going???

  • I have a brand new Ipod touch and it will not sync.

    I have a brand new ipod touch and I cannot get it to synch with my itunes.  I have two other Ipod Nano's that will synch up just fine.  The computer has windows XP with the latest service pack on it.  It does not recognize it as a device in windows, but sees my other two ipods.  I have the latest itunes software on it.  I even uninstalled it and reinstalled per the apple web site.  I connected the ipod touch to another cpmputer and the usb port sees it as a device just fine.  What do I need to do to this thing to get this computer to see it?

    Start here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    The iOS devices use differnt drivers than a Nano and other simple iPods

  • Why won't my BRAND NEW iPod Nano 7th Generation recognize headphones?

    My BRAND NEW iPod Nano 7th Generation (purchased from and Apple Store less than a week ago) will not recognize any headphones.  Consequently, I can hear NO sounds.  It worked just fine right after I set it up. I turned it off, disconnected headphones that came with the Nano. Several hours later I turned it on again, plugged in the headphones, and then I could hear NOTHING. When I tried the radio, I got the message there was no signal because it said the headphones were not plugged in, which they were.  I have tried two other sets of headphones.  None work, but they all work in another iPod, so I know it is not the headphones. I restored the software and started over, but this didn't help either.  I have pushed the headphone jack in as far as possible. This is very frustating because this Nano was a birthday gift for my husband.   I will be grateful for any help.  Thanks a lot.

    Thanks SO much for the GREAT advice!  I did just what you said, and I am back in business.  The sound is fine, and the radio works. I cleaned out the jack with a tooth pick, blew some air in, and pushed the jack in a bit harder.I guess I was too tentative about pushing the jack all the way in. You were right that it is a tight fit.  Thanks again, deggie.  My husband thanks you also! His birthday gift now works!  Yay!

  • Issue with brand new iPod Nano 7g No Phone, can't contact Apple

    Hi everyone,
    I just got my brand new iPod Nano the other day, when I opened it up and took the sticker off, I saw a large scratch down the screen. That was annoying enough but the scratch affects the touchscreen ability and it's very tough to ignore.
    So like a normal person I want to contact Apple to try and resolve this, but I've hit another barrier. I only have one phone, a mobile and that's bust up. No way I can take or recieve calls unless I become psychic as the speaker and mic are broken. So i'm wondering if there's any other way I can contact Apple?
    My nearest Apple store is about a 2 hour drive away as I live in the middle of nowhere, helpfully...
    Totally new to this place so any help is appreciated.
    Thanks

    So i'm wondering if there's any other way I can contact Apple?
    Either borrow a cell or a landline phone.  I find it hard to believe no one in your neighborhood, family, school or job have no phone.
    My nearest Apple store is about a 2 hour drive away as I live in the middle of nowhere,
    They are not the only places to go - AASP's Outside of the USA
    How to find your nearest Apple Authorized Service Provider (AASP)

  • I am unable to get my decently new Imac to recognize or charge my brand new ipod nano.

    I am unable to get my decently new Imac to recognize or charge my brand new ipod nano.  I have tried to restart my computer and the ipod, neither have worked. Running itunes 10.7.  Please help.

    Can you see your device being connected to your iMac in the System Profiler?
    Although this is not an iPod touch, try these suggestions as well:
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

  • Brand new ipod nano will work when attached by cable either to a power adaptor or usb port but stops immediately when disconnected, despite being put on charge with different adaptors. Battery indicator remains constantly on lightning flas symbol and whit

    My Brand New ipod nano (sold to me two days ago by Apple as replacement for previous ipod nano -15 months old and therefore out of warranty - which had suddenly stopped functioning altogether) will operate only when attached by cable to either power adapter, usb port on my laptop or when playing on a docking station. When detached, it stops playing and screen goes dark and it will not respond to any buttons, despite being charged several times for many hours on different chargers. The battery indicator stays on lightning flash symbol on white background and has only momentarily shown fully charged symbol once !
    I am baffled as to why this new ipod has a similar problem to the old ipod.
    Is there a virus out there which can have this effect and which I may have picked up on my Pc and have inadvertently transferred to both ipods when sync-ing ?
    My PC has Norton anti-virus software.
    Any suggestions , please ?

    Sounds like the Nano has a faulty battery.  You should be able to have Apple swap it out again for you at no cost.
    B-rock

  • I have a brand new ipod touch and it wont connect to itunes or my computer!!??

    I have a brand new ipod touch however when I connect it to my computer, itunes does not recognise it and neither does my computer. The drivers have downloaded and are showing working. I have tried uninstalling and re-installing itunes as discussed in support centre however nothing seems to work. The ipod itself just has the connect to the computer on the screen, is fully charged and when plugged in a little lock sign comes up for a second or two above the itunes icon!!! Let me know if you have any further suggestions please.

    Thanx for you suggestions, I used my old xp laptop...update software and my ipod connected however the memory is not large enough to hold my itunes library so I could see it was not the cable or the ipod at fault.
    I have tried to connect to my vista laptop again and have tried all of the suggestions in troubleshooting again...I have even upgraded to windows 7 to see if that cleared the problem....and....my computer has located my ipod but is only recognising it as a digital camera so back to the drawing board...
    Please have you any other suggestions???

  • My new ipod nano is not recognized by my itunes and I have tried the trouble shooting tips

    my new ipod nano is not recognized by my itunes and I have tried the trouble shooting tips

    This came from another thread, but worked for me.  Problem is with newest iTunes 4.62 and Windows 8.1.  Unistall iTunes, as well as its helper programs (Apple Application Support, Apple Mobile Divice Support, and Apple Software Update).  Reboot, and reinstall iTunes.  It will reinstall all the other ones and you should be able to connect your nano.  Good luck.

  • I have a brand new ipod touch 32gb ipod touch. Upgraded to ios 7. open music app but there is no radio tab to select!!! All online help just says, "just select it". Can you help?

    I have a brand new ipod touch 32gb ipod touch. Upgraded to ios 7. open music app but there is no radio tab to select!!! All online help just says, "just select it".
    I have looked at the "More" part but again radio is not an option.
    Can you help?

    Just wait a bit.  Turn it off, then back on.
    I don't know why, but after the update it doesn't show up right away.
    When it finally does, you will find a red icon on the bottom of the screen, on the left side.

  • Have a brand new ipod touch.  Will not respond to swiping.  Have tried to reset it but no luck.  please help

    Have a brand new ipod touch and the screen is completely unresponsive.  I cannot swipe the screen to configure it at all.  I have pressed the home button and on/off button to reset it but it does not have any effect.  Please could someone help.

    - Restore the iPod from backup
    - If still problem restore to factory settings/new iPod
    - Last, male an appointment at the Genius Bar of an Apple store. you have a hardware problem.

  • Just bought a brand new ipod nano and downloaded an audiobook borrowed from the local library.  The book is there and playing but, I cannot hear anything.  What am I doing wrong?

    just bought a brand new ipod nano and downloaded an audiobook borrowed from the local library.  The book is there and playing but, I cannot hear anything.  What am I doing wrong?

    Does the same file play normally in iTunes?  Do other audiobooks play normally on the iPod?
    How does "borrowing" work?  Does it require use of another app, other than iTunes, to get it on the iPod?

Maybe you are looking for

  • Create a dynamic attribute for each user

    Hi All, I request you all to let me know how to give an approach to the following requirement. REQUIREMENT: I have to create a dynamic attribute in UME for each user and the read the attribute on lead selection of a table having list of Users.       

  • SQL Query (pl/sql function body returning Sql query)

    Hi All, I have created a region of "SQL Query (pl/sql function body returning Sql query)" type and it is working fine , but when I am migrating(export /import) this application from development to systest environment , It gives error for this region

  • Whats the best free video converter ?

    I am sending out a small mov (DV)  file to a a few dozen people (not clients as this is a free thing). These people want to be able to convert this avi file down to a MP4 or other formats that will work fine on: Mobile phones Video frames small porta

  • Transaction timeout

    Hi, A) can anybody tell me how to set/get the timeout for a transation. (using Oracle). B) Or it is better to set this property direct on oracle-db? If B) yes, where do i set this property? thx

  • Try to give reasons for these Q's

    1. Why clone() method to be defined as 'final'? What is the security reason involved in this? 2.Why Interfaces should not be serializable? What is the security reason involved in this?