I have a bright spot on the screen of just purchased iPad mini 32. What is the cause and solution?

I have a bright spot about quarter inch circular on the display of just purchased iPad mini 32 g . Does anyone know the cause and solution?

If you just purchased the tablet,   take it back to an apple store and have it replaced.

Similar Messages

  • Why it is taking too much time to login in yosemite? and to load webpages.. whenever i kept in sleep mode battery drains itself causing overheat... what might be the cause and solution? i have my projects going on..please help.thanks.

    thanks

       Reset PRAM.   http://support.apple.com/kb/PH18761
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
       Start up in Safe Mode.  http://support.apple.com/en-us/HT1564

  • My Apple ID is no longer working, what is the cause and solution to getting it back?

    A few days ago, my Apple ID stopped working. over the last week, i have been trying to recover thru the normal website process. There are two options on the website - have a temp password sent to your email OR answer a security question in my case BIRTHDATE. When requesting they send a temp password, the procuess would seem to complete, but I never got an email (not in 'junk' folder either). When entering the answer to the secret question, that did not work either.
    We have been trying many different tactics and nothing has worked...until today.
    We decided to try establishing a new Apple ID. AND we used the same ID. It accepted it! We are now facing issues with finishing the set up of the account thru iStore, we are hung up on the credit card entry (we are living overseas, but entering with valid US credit cards).
    Not so concerned about the latter issue. I am worried that we were able to re-establish an Apple ID using the original. The system is treating it as if it never existed.
    I've gone thru the community support site, and it seems like others have had similar issues, but in the threads I've read, there never seems to be a resolution to the issue.
    Help!

    With the amount of information you've provided it's impossible to offer a potential solution.  We can't see your computer so we need to know some details of your problem and setup, i.e.:
    what version of iPhoto are you using?
    what system version are you running?
    what fixes have you tried?
    where is you library located?
    did you apply any updates or upgrades just prior to the problem occurring?
    are you running a "managed" or "referenced" library?
    what type of Mac?
    how much free space on your boot drive?
    OT

  • I recently did the iOS 7.0.2 update, now I'm unable to purchase apps. "App could not be purchased at this time. Please try again later. ". I have tried a few of the suggestions and nothing has worked. Reset,change auto lock time on main screen, now what??

    I recently did the iOS 7.0.2 update, now I'm unable to purchase apps. "App could not be purchased at this time. Please try again later. ". I have tried a few of the suggestions and nothing has worked. Reset,change auto lock time on main screen, change language setting. Now what???

    This sorted it for me:
    Backup your iPhone to iCloud (I believe backing up to iTunes will work too). Now go to "Settings --> General --> Reset --> Erase All Content and Settings" to completely restore your iPhone to factory settings. Assuming you've backed up to iCloud, you'll be asked when setting up your iPhone if you want to restore from an iCloud backup. Choose that option and once your iPhone has restored itself from your backup, this annoying problem will finally be gone! (was for me anyway).
    To restore from an iTunes backup, connect your iPhone to your computer, load iTunes. Click the File menu and select Devices > Restore from Back up.

  • Ipad 2 screen is black . when i press the power button it takes a screen shot but i have no functionality . tried holding the home and power button together but the screen just flicker and stay black . no apple icon shows up. help please

    ipad 2 screen is black . when i press the power button it takes a screen shot but i have no functionality . tried holding the home and power button together but the screen just flicker and stay black . no apple icon shows up. help please

    Make sure it is charged for about 10min using the adapter, then connect in recovery mode, explained in this article:
    If you can't update or restore your iOS device

  • My iphone screen has gone completely blank I have tried holding down both the sleep and home buttons and nothing has happened and I have tried to connect it to my laptop but itunes will not recognise, what can I do ?

    My iphone screen has gone completely blank I have tried holding down both the sleep and home buttons and nothing has happened and I have tried to connect it to my laptop but itunes will not recognise, what can I do ?

    have you tried charging the device ?
    if so and it still does not work you can try a Forced Recovery..
    by holding the HOME button down and plugging it into your computer at the same time..
    http://support.apple.com/kb/HT1808

  • I just purchased an extreme.  I have an express.  The sales guy recommended setting up a hot spot with the express and use the extreme as a base station.  What does he mean and how do I do this?  What are the advantages?

    I just purchased an extreme.  I have an express.  The sales guy recommended setting up a hot spot with the express and use the extreme as a base station.  What does he mean and how do I do this?  What are the advantages?  How do I set this up?????

    I think he means to set up the main extreme as the main router or "main base station", and then use the express to "extend" the network.
    You can look up the manual for your express here for more details:
    http://support.apple.com/manuals/
    Extend the range of your network by adding AirPort Express to your existing AirPortExtreme or AirPort Express wireless network (this is called a Wireless DistributionSystem, or WDS). "
    Extending the Range of an Existing AirPort Extreme or
    AirPort Express Network
    You can extend the range of an existing AirPort Extreme or AirPort Express wirelessnetwork by setting it up in a WDS. Wireless computers can connect to the network andshare the Internet connection, share files, and play network games. If you connect yourAirPort Express to your home stereo, computers on your wireless network can useAirTunes to play music on the stereo from iTunes. If you connect a USB printer to yourAirPort Express, all of the computers on the network can print to it.
    n Open the AirPort Setup Assistant on a Macintosh, or the AirPort Express Assistant on acomputer using Windows XP. Follow the onscreen instructions to extend the range ofyour AirPort Extreme or AirPort Express network.
    Note: Extending the range of a network using WDS may reduce overall networkperformance.

  • I noticed the bright spots on the ipad retina display in a black image. Used only 2 weeks.is it normal?

    I noticed the bright spots on the ipad retina display in a black image. Used only 2 weeks.is it normal?

    No its not normal. I'm not sure how big these bright spots are, but it could be a hardware problem. Without more details, I would suggest that you take it to an Apple Store or take it back to wherever you bought it and let the, evaluate the iPad.

  • My iPad screen has gone black.  I have tried resetting it with the sleep and home buttons and it only flashes the apple on the screen for a nano second and then it goes black again.  I can even hear notifications arriving, but I cannot see anything...

    My iPad screen has gone black.  I have tried resetting it with the sleep and home buttons and it only flashes the apple on the screen for a nano second and then it goes black again.  I can even hear notifications arriving, but I cannot see anything...I'd rather not reset it to the factory settings as I have a lot of things I worry about using.  Either way seems to me that the system itself is working since I can hear it working, but its the screen that isn't.  It has not been dropped and has been in a case for years!  Please help!

    When the power is on and I press the home button, I can slide my finger where the slider bar "would be" and it makes the noise as if its "opening" flashes a blue screen then returns black...

  • I have a Dead Spot in the Tone Curve

    I have noticed when using a tablet while working in LR5 I have a dead spot in the upper part of the curve near the highlights portion. I thought it was just a result of my tablet being old and a cheaper model. I tested it with a new Intuos 5 Touch and had the same problem. I go to drag down or up on the upper part of the curve and it doesn't move or hangs up. It happens in all RGB channels also. Has anyone else had this problem or know why this happens? Thanks!

    Try:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes      
    - Restore to factory settings/new iOS device.                       
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.

  • I have rearranged all icons on the second and third pages to have a just a photo on my home, but if i switch off the iphone when i restarted it all the icons come back in the old position on the home and second page. I have ios5.

    I have rearranged all icons on the second and third pages to have a just a photo on my home, but if i switch off the iphone when i restarted it all the icons come back in the old position on the home and second page. I have ios5.

    you can suggest it here - http://www.apple.com/feedback/iphone.html
    And it is only a problem if you want a blank first screen.  Personally, it would drive me nuts always having to swipe over one page to get to my apps - the only time I unlock my iPhone is to use it or run an app, so no, I have no need nor desire to have a first screen with no icons at all.
    But, if they'd put it in as an option so people like yourself can also have what they want, that's fine too    So send them your feedback (they actually do listen - iOS 5 includes a number of things people have been asking for on these forums, like being able to delete individual entries from the call history, inproved alerts/notifications, being able to opt out of all the location based data they collect,...).

  • Since cahnging FIOS Internet provider, which required a router to go in front of "AirPort" I have a blinking yellow on the AirPort and suggested editing in AirPort utility to cahnge from Double NAT to "Bridge Mode" my knowledge base is not clear as t

    How do I clean up my new FIOS connection? I just cahnged ISP Fios and they reqquired a router of thier own in front of my AirPort Extreme. Since then I have blinking yellow light on the AirPort and AirPort utility keeps promting for an edit. Suggests canging from NAT to "Bridge mode". Obviuosly U have some internet or this post would not go anywhere, my knowledge base is not enought to feel comfortable with changing the settings. Correctly editing can be tricky, so how do I make necessary changes?

    How do I clean up my new FIOS connection?
    The FIOS router needs to be in Bridge Mode to prevent the Double NAT error from occurring when two routers are both fighting with each other for control of the network.
    Unfortunately, the likely problem from the FIOS side is that FIOS support will either tell you that their router cannot be configured to operate in Bridge Mode, or if it can, they will not tell you how to do it.
    But, it could not hurt to check with FIOS to see if anything might have changed recently in this regard, so your first call would be to FIOS support.
    If you cannot change the FIOS router to Bridge Mode, the alternate plan would be to change the AirPort Extreme to Bridge Mode. If you are using the Guest Network feature on the AirPort Extreme at this time, that feature will not work correctly when the AirPort is set up in Bridge Mode.

  • Hi from the last two days my iphone have very slow to open the apps and very slow when i check the notification window , it taking too much time to open when i tap to down . help me to resolve the issue.

    Hi,  from the last two days my iphone( iphone 4 with ios 5) have very slow to open the apps and very slow when i check the notification window , it taking too much time to open when i tap to down . help me to resolve the issue.

    The Basic Troubleshooting Steps are:
    Restart... Reset... Restore...
    iPhone Reset
    http://support.apple.com/kb/ht1430
    Try this First... You will Not Lose Any Data...
    Turn the Phone Off...
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear and then Disappear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...
    Turn the Phone On...
    If that does not help... See Here:
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414

  • What is the default key command for the COMMAND key?I seem to have changed it somehow along the way and now when I push the command key it hides all windows or shows desk top I need to correct this as soon as possible-.any ideas?

    What is the default key command for THE COMMAND (apple) key? I seem to have changed it somehow along the way and now when I push the command key (only) it hides all open windows and shows the desk top and when I push it again it shows all windows again...I need to return to default A.S.A.P. just this one key...Any ideas? Thanks in advance...

    Go to
     > System Preferences > Keyboard
    Click on the 'Keyboard' tab and hit the 'modifier keys...' button. You can see and change the defaults there.
    As I'm not sure if all the labels are the same in Lion, he's a screenshot from Snow Leopard. It should be similar enough:

  • I attempted to update my iphone5 to 7.1.1  There was an error and now my phone is erased.  I have attempted to restore from the cloud and it propogates the apple id with an old one, and will not allow me to restore from a the cloud

    I attempted to update my iphone5 to 7.1.1  There was an error and now my phone is erased.  I have attempted to restore from the cloud and it propogates the apple id with an old one, and will not allow me to restore from a the cloud

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              
    Also, do you remember what the error message said?

Maybe you are looking for

  • Bank Statement Import interface tables

    Hi all, I'm using OEBS R 12.1.3. Can anybody tells me/some links or info / about the Bank Statement Import Program which interface tables uses as i cannot found or i'm just a bad researcher...? I have to insert data there in order this program to cre

  • Change first day of the week from Monday to Sunday(0CALWEEK)

    Hello! We have a report that display the data at a calendar week level. The start of the week currently show as Monday( retreived from FM - WEEK_GET_FIRST_DAY). Is there a global setting in source system to change the start day of the week from Monda

  • Error in raising an event

    Hello friends                 I have 2 iViews in a Page. The first iView consists of a variable for a query and the second iView is nested in a tabstrip. The second iView consists of 2 tabs with each consisting of a BW query. Both the queries share t

  • Does any one know how Fixed Assets links to the Purchasing ledger?

    Hi, Does any one know how Fixed Assets links to the Purchasing ledger? As I have looked high and low and can't find any table mappings or anyway the ledgers link, this is a problem as I am struggling to track an asset back to a Purchase Order. I have

  • Spotify and Flash Player 10.3

    My Spotify didn't functioning (didn't "answer") suddenly. When I deleted Flash Player 10.3 Spotify worked again. Trying to download Flash Player again; same result. This means I have to decide whether I shall give priority to Spotify or the abality t