I have a broken screen on my 2008 MacBook, I want to access the hard drive what are my options?

I Have a 2008 MacBook with a broken screen, how can I access the hard drive?

1. Connect an external monitor. If everything else is working fine on the MacBook, you'll have full access to your computer. Or
2. If the MacBook has a FireWire port, use Target Disk Mode (http://support.apple.com/en-us/HT1661) to mount the HDD and then copy the files to the second Mac. Or
3. Remove the HDD, put it in a $20 USB caddy, and connect it to another Mac for file-retrieval.
By the way, this forum is devoted to vintage Classic operating systems that Apple retired over a decade ago. More people will see your posts if you put them in a forum devoted to your particular level of OS X (Leopard or above for a 2008 MacBook).

Similar Messages

I have a macbook pro 15 inch mid 2012 and I want to change the hard drive, what specifications do I need to search for?

I have a macbook pro 15 inch mid 2012 and I want to change the hard drive, what specifications do I need to search for?

Does a Seagate - 1TB Internal Serial ATA III/Serial ATA II Solid State Hybrid Drive for Laptops - Multi with the following specifications may work??
Height
4 inches
Width
2.75 inches
Weight
3.5 ounces
Color Category
Multi
Minimum System Requirements
PC: Windows XP, Vista, 7 or 8; MacBook®, MacBook Pro or Mac Mini: Intel®
processor; OS X; Linux; internal Serial ATA III or Serial ATA II support

I have a power mac g4 with mac os 10.4. 11 , I want to change the hard-drive ,what program can I used to transfer one hard-drive to another hard- drive on this mac pc.

I have a power mac g4 with mac os 10.4. 11 , I want to change the hard-drive
,what program can I used to transfer one hard-drive data to another hard- drive on this mac pc.

The Disk Utility, Carbon Copy Cloner, SuperDuper, or similar software. For best results, place the second drive inside the computer or in a FireWire enclosure and boot the computer from it before removing the internal drive.
(66989)

I have a 15" MacBook Pro 2.4 GHz Intel Core 2 Duo (Early 2008) running OSX Lion 10.7.5. I want to erase the Hard Drive, install Mountain Lion, and manually restore select applications and files. Is there a known procedure to do this? Any tips or feedback?

I have a 15" MacBook Pro 2.4 GHz Intel Core 2 Duo (Early 2008) running OSX Lion 10.7.5.
I want to erase the Hard Drive, install Mountain Lion, and manually restore select applications and files.
Is there a known procedure to do this? Any tips or feedback?

1. Make a backup, open App Store and purchase Mountain Lion. When its download finishes, close the installer and open Lion Diskmaker to create a bootable USB drive with Mountain Lion.
2. Press Option key while your Mac is starting, select the external drive and open Disk Utility.
3. Select Macintosh HD in the sidebar and erase the drive.
4. Close the window and install Mountain Lion

Hi i am have had a lot of trouble emptying my trash. when i go to put something in there it asks from my password and the item goes off the screen, but this does not clear any space on the hard drive.

Hi i am have had a lot of trouble emptying my trash. when i go to put something in there it asks from my password and the item goes off the screen, but this does not clear any space on the hard drive.

1. Triple-click the line below to select it:
~/.Trash
2. Right-click or control-click the highlighted line and select
Services ▹ Show Info
from the contextual menu. An Info dialog should open.
3. The dialog should show "You can read and write" in the Sharing & Permissions section. If that's not what it shows, click the padlock icon in the lower right corner of the window and enter your password when prompted. Use the plus- and minus-sign buttons to give yourself Read & Write access and "everyone" No Access. Delete any other entries in the access list.
4. In the General section, uncheck the box marked Locked if it's checked.
5. From the action menu (gear icon) at the bottom of the dialog, select Apply to enclosed items and confirm.
6. Close the Info window and test.

I have an early 2008 macbook and want to upgrade the os. Can I upgrade to snow lepard?

I have an early 2008 macbook and want to upgrade the os. Can I upgrade to snow lepard?

Last night I posted: I have an early 2008 macbook and want to upgrade the os. Can I upgrade to snow leopard?
Today I started the install using a OSX 10.6.4 install dvd. It would not install on my Macbook. The general requirements were met, the Macbook booted to the dvd but I received the meesage that I could not install the new OS. So, new question: Any advice on where to get the last release of 10.5 Leopard (> 10.5.2)? Also, does anyone know why Snow Leopard won't work? Is Leopard as far as I can go on this machine?

I have a MacPro with two 1T hard drives. How do I access the hard drive that is not the start-up drive?

I purchased a MacPro and upgraded to 2 1T hard drives. How do I access the hard drive that is not the start-up drive?

Have you formatted these new drives yet with Disk Utility? That is the first step.
Once they are formatted, if you want to see them on your desktop open the Finder preferences, General, and clock the checkbox that says "Show these items on the desktop" for the hard disks. If that preference was already set you should see the drives appear after they are formatted. Then they are there for you to use as you wish.

I have a rather old iMac 20" (mid 2007) and I want to upgrade the Hard drive. How do I change it? How do I transfer all my applications? May I just copy the old hd into the new one? Thanks.

I have a rather old iMac 20" (mid 2007) and I want to upgrade the Hard drive. How do I change it? How do I transfer all my applications? May I just copy the old hd into the new one? Thanks.

There are many online tutorials on how to change out the HD on a mid 2007 iMac. One of the originals is from 2007 and is Upgrade your iMac 20" or iMac 24" aluminum (mid 2007) to 1TB Hard Drive and 4 GB RAM - DIY Guide. As far as migrating your system Apple helps out with that in Setup Assistant which automatically starts when you turn on a new Mac for the first time. After you have installed the new HD you will have to format the new HD to Mac OS Extended (Journaled) and then you will have to install OS X. The first time you turn it on Setup Assistant will start. Follow the directions and you will be fine. In order to restore your information you will need to backup what is on the current internal HD first. I'd recommend using Time Machine (Assuming you are using Leopard or later) AND also creating a bootable clone using either SuperDuper or Carbon Copy Cloner.
Please complete your profile so at the very least we know what version of OS X your machine has installed.

I have to extract all files from a hard drive of a macbook pro that is no longer working. All I have to access the hard drive is a PC, is this possible, and if so how?

I have to extract all files from a hard drive of a macbook pro that is no longer working. All I have to access the hard drive is a PC, is this possible, and if so how?

You could try Paragon HFS+ for Windows. That would allow you to read and write files from a Mac-formatted drive.
Clinton

I want to wipe the hard drive on my apple G4 powerbook clean. I do not have the original discs that came with the laptop. I do have the OS x 10.4 disc that I purchased. When I reinstall 10.4 will that disc also have itunes iphoto and safari on it.

I have an apple powerbook g4 running 10.3.9 which my daughter gave me. However all the installation discs were lost. I just purchaed OS x Panther for it. I want to wipe the hard drive clean to get rid of all of her personal information as I want to donate the laptop to a needy family. Do I need the installation discs or will the panther os x disc have everything that I need to wipe the hard drive clean and install panther. I do have an external hard drive.

Hello again,
Some of those applications you mention will not be on the recently purchased OS 10.3 Panther disk so you'll need to make a copy of them so you can restore them later.
Copy to your external drive;
iPhoto, iMovie, iTunes* and you may also have World Book 2003 depending what bonus software was installed when new. There may be other Non Apple applications you want to keep also.
*You could probably still get a download of iTunes but because it is such an old version, to save searching for it, make a copy of it while it is in front of you.
Everything else will be the 10.3 Panther disk including Safari.
Ideally with original disks, the process would be:
Insert your Install disk 1 into the drive and then Restart, and hold down the C key to take you to the installation windows.
Select your language, the start up Disk and choose Erase and Install.
At the point your registration process starts, abandon the registration, quit and eject the disk and switch of the computer.
This will allow the new user a freshly installed system, whereby they can complete the registration process themselves.
However...
But as you want to add back iPhoto and iMovie etc, you'll proceed to create an Admin account, in order to add back those applications, by copying them from the external drive back to the Applications folder. After doing that you are finished.
Instruct the new user can create their own Admin account, (more than one can exist) and thereafter deleting the first one you created.
This would achieve a fresh setup akin to the original.

I have an Ipad, I activated the time capsule with no issues. I added the airport Utility application without issue. However, I do not know how to access the hard drive with either my Windows computer or the Ipad. Does someone know how?

I have an Ipad, I activated the time capsule with no issues. I added the airport Utility application without issue. However, I do not know how to access the hard drive with either my Windows computer or the Ipad. Does someone know how?

On windows load the airport utility .. latest correct version as possible.. there is no windows 8 but win7 works after a fashion.
Make sure the TC is using SMB compatible names.. short no spaces and pure alphanumeric.
Type the name directly into windows explorer.
\\TCname or \\TCIPaddress
If no luck turn off all the firewalls.. internal windows plus security software plus whatever other gargyoles and other rubbish AV software you have running.
Ensure windows is able to at least ping the TC by IP address and name..
Use the utility in windows to set file sharing to guest account on with full read and write access.. and set workgroup to WORKGROUP.

I have 2 different MacBooks (owned by 2 people) connected to my Time Capsule. I want to use the Time Capsule to back up both MacBooks separately from each other. Can one person access the hard drive of the other person, on the same Time Capsule?

I have 2 different MacBooks (owned by 2 people) connected to the same Time Capsule over a wifi network. I want to use the Time Capsule to back up both MacBooks separately from each other. Can one person access the hard drive of the other person, on the same Time Capsule? Is there a way to ensure that the files on the 2 laptops are kept private from each other? Thanks!

If someone really wants to do something, it won't take them long to find out how to do it.
http://pondini.org/TM/17.html
Security on a Time Capsule is a bit like installing a lock on a tent. It will keep the honest folks out, but probably not the others.

My imac is a 2009 model. It won't turn on. I have been told it could be the video card.What are my options?, My imac is a 2009 model. It won't turn on. I have been told it could be the video card.What are my options?

My imac is a 2009 model. It won't turn on. I have been told it could be the video card.What are my options?, My imac is a 2009 model. It won't turn on. I have been told it could be the video card.What are my options?

It could also be the power supply. Do you have a backup of the OS. If you have a near by Apple Retail Store I would bring it in and let them do a diagnostic on it to find out for sure. Once you know what it is for sure, you can decide whether to fix or replace.

Hi. i have a 1hr wedding video in imovie but it wont let me burn to disc - what are my options please?

Hi. i have a 1hr wedding video in imovie but it wont let me burn to disc - what are my options please?

Hi
Or if in Panic - There are free (but very vey simple) options
No iDVD
If there is no iDVD on Your Mac (and it's not on newer Macs as Apple discarded it) then You need a program that can do this.
Your Mac can burn CDs and DVDs - BUT DVD as Data-DVDs not as Video-DVDs - they need a program to be encoded and STRUCTURED as such.
• Burn - Very simple - Just for doing a plain Video-DVD
Burn http://www.digital-digest.com/software/Burn.html
• Free DVD Creator.app - free from Apple Store - Looks really OK !
Pay program's:
• iDVD is part of the boxed version of iLife'11 and can only be bought outside Apple as on Amazon and e-bay
• DVD Studio pro - Part of FinalCut Studio Pro bundle - this to has expired and can only be bought second handed. (High price and tough learning Curve - but best ever done.)
• Roxio Toast™ - Not as elegant as iDVD - but has many other positive additions (I like it as 10-Pro incl BD-component) (now version 11)
• FinalCut Pro-X which also can burn to DVD but without any nice themes.
AppleMan1958
You can also buy Compressor from Apple for $50 US. It will also create DVD and BluRay but without the nice themes.
Yours Bengt W

I have a Macbook Pro and want to take the Hard drive back to as it was the day I purchased it.

Hi, I have a Macbook Pro and want to take the Hard drive back to as it was the day I purchased it, It came preloaded with Lion so no disk, how can I do this so I can sell it without any of my personal data on it.
Thanks
Paul

What operating system are you using?
OS 10.7.2
What model/vintage/year is it?
Macbook Pro 17" 2011
Do you have the original OS X install DVD disc that came with the computer?
It came preloaded so no disk

I have a broken screen on my 2008 MacBook, I want to access the hard drive what are my options?

Similar Messages

Maybe you are looking for