I have a brother laser hl 1110 printer. the double side page printing option is greyed out and unusable. anyone know a fix for this? thanks. it prints single side okay.

basically the question is the same as the title of the discussion. double sided printing option is grey and unselectable. i can't figure out if it can be changed to on in the presets etc. would appreciate any help. i am using maverick and the brother hl 1110 laser printer.

Hello! I have the same exact problem and tried your suggestion. I can't find a duplex setting

Similar Messages

Barcode shows a bunch of squares when barcode is made on AI CS11. Does anyone know a fix for this? We have CS2 running on another PC and we don't get this problem.

Barcode shows a bunch of squares when barcode is made on AI CS11. Does anyone know a fix for this? We have CS2 running on another PC and we don't get this problem.
Background:
Using FrameMaker 7.1 to create a PDF file where a CS11 barcode file is embedded. PDF generates fine but we get a bunch of squares when we copy and paste the barcode data into Notepad.
We have CS 2 running on another PC and we don't get this problem. Do I need to install a plugin (if any) for CS11 to get this to work?
Thanks!

Thanks for your feedback. I was not able to mention earlier that in my line of work, we use Notepad to check if the barcode text is written correctly or if the corresponding text can be found if searched in the PDF... We use FREE3OF9.TTF font when entering text values for the barcode (usually in document/part number format exclusive for our company's use) in AI CS11. After saving the AI file, we attach it in a document using FrameMaker 7.1, then a PDF file is created. The output PDF will be a certification sheet for our products. They (our clients) should be able to scan the document/part number out of the barcode. I'm sorry, I could not divulge any other information so I am not sure if this clears out the issue. It used to work before but I had to get my PC formatted and since then I have been encountering this problem. I am trying to figure out if we missed to install a component or something got messed up after re-installing Adobe Illustrator CS11.

I tried to sync music from iTunes to my iPhone and when I click on "on this phone" the songs are there, but they are greyed out and have a circle in front of them. I can not click on those songs and when I eject the phone they are not on the phone.

I tried to sync music from iTunes to my iPhone and when I click on "on this phone" the songs are there, but they are greyed out and have a circle in front of them. I can not click on those songs, delete or anything and when I eject the phone they are not on the phone. I tried to re-add the songs and it says it can't add songs because they've already been added. So HOW can I get the songs to actually ADD to my phone to where I can listen to them? It's like they're stuck in Sync limbo or something! Any help would be greatly appreciated.

I am having the same problem. I have just tried this. Unplug iphone > open itunes > delete all music from itunes library > close itunes > re-open itunes > add music from original folder > plug in iphone > select songs > press sync > unplug iphone using eject button onscreen > checked phone .... still nothing in music folder on phone. On itunes the "On this iphone" tab the songs remain there but greyed out.

I have a new Macbook pro, I cannot get past the country selection screen. 'Continue' is greyed out and keys just make error sounds. How do I move it on?

I have a new Macbook pro, I cannot get past the country selection screen. 'Continue' is greyed out and keys just make error sounds. How do I move it on?

sideeque wrote:
I have the same problem. What did you do last time?
What should I do now? Its around 40 miles away the apple store? Would they pay my taxi fare to go and return?
How can we trust this apple product?
You are still under warranty. Call Apple Care.

I have had to reinstall my Mavericks OS and use a Time Machine backup. Now when I open InDesign I get Error:5 , AMT subsystem failure. Do you know a fix for this?

I have had to reinstall my Mavericks OS and use a Time Machine backup. Now when I open InDesign I get Error:5 , AMT subsystem failure. Does anyone have a fix for this?

I have had to reinstall my Mavericks OS and use a Time Machine backup. Now when I open InDesign I get Error:5 , AMT subsystem failure. Does anyone have a fix for this?

Print the report on page has width larger than height and not landscape mode

Hi,
I'm trying to print report on page (Width: 18cm, Height: 13cm) which the width larger than the height.
The problem is windows keeps changing the page oreintation to landscape and when I change it back to portrait its changing the width to 13cm and height to 18cm.
I'm using dot matrix printer to print the report, if i put Landscape , printer is printing the text in horizontal.
Already i have tried to setup the custom for on printer, and used custom page size but it is changing to landscape.
I need to print the report with out preview, direct print top printer, NO PDF....
Thank you .....

Hi Anil,
After testing the issue in my environment, I can reproduce it. When I set (Width: 18cm, Height: 13cm) as the Report Page size, it would automatically convert Orientation from Portrait to Landscape. Because the Orientation displayed is dependent on the page
width and page height of the report.
But in my scenario, the Orientation option just change the Width and Height sizes, it couldn’t affect the text rotation. I guess this issue can be caused by the printer and printer driver, please try to update them. Reference:
http://stackoverflow.com/questions/15244336/printing-in-landscape-or-portrait-automatically-rotates-text-ssrs?lq=1
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Display flickers on my 2 wk old iPhone 5. I have tried resetting the phone, but it still flickers. Very annoying. Does anyone know how to solve this?

The display is flickering on my iPhone 5. Any suggestions how to cure this by re-setting something?

Basics (straight from the manual) are restart, reset, restore from backup, restore as new. Good through each step in succession until your problem is solved. If not solved after all these steps, you'll need to bring your phone to Apple for evaluation.

I have a Bootcamp partition on my Imac with Mavericks which I can't delete because the Partition Layout is greyed out and is stuck on 'Current'. What can I do?

I have a Bootcamp partition on my Imac with Mavericks which I can't delete because the Partition Layout in Disk Utility is greyed out and is stuck on 'Current'. What can I do? I was trying to install Windows 8.1 but apparently, this is not yet possible.
I was originally able to restore to my original Mac OSX partition using Boot Camp Assistant but then after entering Disk Utility and re-RAIDing the default RAID 1 to RAID 0 in the BootCamp partition (I suspect this is the cause of the problem but why was it defaulted to RAID 1 in the first place?!!!!), forever afterwards, I couldn't restore the single OSX partition.
Whenever I used BootCamp Assistant my choice to 'Install or remove Windows 7 or later version' was greyed out. Finally I went to Disk Utility to repartition but the Macintosh HD and BootCamp disk partition functions were also greyed out (even if I started up from Recovery mode holding down option, command and 'R' and choosing Disk Utility). BootCamp Assistant gives the error message 'The startup disk cannot be partitioned or restored to a single partition' with additional small script 'The startup disk must be formatted as a single Mac OS Extended (Journaled) volume or already partitioned by Boot Camp Assistant for installing Windows', and DU gives the error message 'The full size of the Fusion drive is not available for repartitioning'.
What can I do to fix this problem? How can I make the Partition Layout button active in DU so I can change the partition to all OSX? I'm prepared to wipe off all my data etc to repartition and have backed up all to disk using Time Machine.

My problem is fixed now, thank you. It was caused by my changing the Boot Camp partition's 'RAID1' to 'RAID0'. If I hadn't done that, Boot Camp would still have been able to 'restore' back to the one partition. It was fixed with the help of Applecare by using a terminal and typing a command to erase the IP of the Macintosh disk (not the volume) as well as the IP of the Bootcamp partition (if I remember correctly), but then I had to restore the OS and all my applications and data etc which I had previously backed up using Time Machine. I haven't taken note of the exact command terminology used. It would be wise to speak to Applecare about this if possible.
Two words of warning, 1. According to the cause of this problem, it might be wise, after reinstalling the ops system to reinstall all extra applications one by one, manually, in case a similar problem arises again. Then manually copy back all data. Or the Mac user could use the Time Machine backup and then uninstall all the added apps then re-install them one by one manually. 2. Beware as after all this the user might not have the 'Recovery partition'. There is a small recovery partition (a few 100 Mb is size) which comes with all later Macs. After all this is done this tiny partition might not be there anymore and the user might have to re-install Mavericks again to get it back, or just install the upcoming update of Mavericks due in a month or so.

Insert Bar in hotmail is greyed out and am unable to attach files; have silverlight plug in enabled; what's the problem?

the Insert bar in hotmail reply is greyed out and the icons such "Attachments" are not clickable. I am using Firefox 3.6.13 and have Silverlight 4.0.51204.0 enabled. What can be the problem? Also, in some instances cookies that store my address and other information that I need to populate when filling in online purchase forms on - say - eBay, are not working and I have to fill them in every time.

in mozilla firefox go to Tools/addons/plug-ins and '''disable silverlight'''

My iMac is connected to a Brother printer. I have Snow Leopard 10.7.3 As of yesterday, when I try to print a PDF it prints as a blank black page. Does anyone know how to correct this so that the PDF will print as I see it on screen?

My iMac is connected to a Brother printer. I have Snow Leopard 10.7.3 As of yesterday, when I try to print a PDF it prints as a blank black page. Does anyone know how to correct this so that the PDF will print as I see it on screen?

If you are running Mac OS X 10.7.3 then you have Lion installed, not Snow Leopard. It's probably not important to this discussion, but something you should be aware of.
What application are you printing the PDF files from? Have you tried opening the PDF file using the Preview application that can be found in the Applications folder? Does the issue still occur? Have you tried other PDF files from a different source?
Another poster in the following discussion thread reported that this method resolved their black blank PDF issue when viewing (and presumably printing) PDF files from Safari.
https://discussions.apple.com/thread/3890509?start=0&tstart=0
This solved my question by mcbuffy on Apr 20, 2012 11:29 AM
There's a solution if you want to see the PDF inside Safari's window :
Go to the folder : Your Hard Drive / Library / Internet Plug-ins.
If you see a file with PDF in its name drag it to the trash.
Quit and restart Safari to test with a PDF.
If it works you can empty the trash.

HT1338 I have an HP Printer/scanner, and since upgrading to Mountain Lion I can no longer scan on my HP. HP tells me that I can get an upgrade app from 'Apple Software Upgrade' . Does anyone know how to do this?

I have an HP Printer/scanner, and since upgrading to Mountain Lion I can no longer scan on my HP. HP tells me that I can get an upgrade app from 'Apple Software Upgrade' . Does anyone know how to do this?

HP couldn't find its own apps with both hands and a flashlight.
As of Lion all scanning functions are incorporated natively in OS X. You can scan three ways:
Use Preview: File > Import from scanner
Use Image Capture
(Preview and Image Capture are both in your Applications folder.)
System Preferences > Print & Scan. Select your HP and use the Scan tab.
If you have HP's "Image Zone" software installed, you no longer need it and it no longer works anyway.

When i 'upgraded' to Mavericks, it locked me out and shut down my computer. now it won't print from my Epson Stylus CX3810. Epson doesn't have the driver to download and neither does the App store. Suggestions?

when i 'upgraded' to Mavericks, it locked me out and shut down my computer. now it won't print from my Epson Stylus CX3810. Epson doesn't have the driver to download and neither does the App store. Suggestions?

I'm having similar problems with my Epson Stylus DX5000. There was no in-built driver available (the generic old and new Stylus drivers didn't work), so downloaded the latest driver from Epson site. It shows as being available to print to, but just sends data to the print queue then job disappears.
I hope you're right C F McBlob, I could do with printing today but if there are new drivers available from November 5, then so be it.

I was able to print from adobe digital editions up to two days ago and now I do not have the option to print. The "Print" option is greyed out. Please help.

I was able to print from adobe digital editions up to two days ago and now I do not have the option to print. The "Print" option is greyed out. Please help.

Printing Expiry option might be set by the Publisher at server level. Right click on the book and select Item Info to know about the book permission.

I can no longer print from windows pc via mac/time machine in lion. Does anyone know why, I can no longer print from windows pc via mac/time machine in lion. Does anyone know why

I can no longer print from windows pc via mac/time machine in lion. Does anyone know why or how to fix? I have print sharing ticked and printer is HP laser jest 2550.

I finally found a log file... unfortunately, it doesn't help me figure out what's wrong... but maybe it will mean something to one of you?
I [10/Dec/2007:20:23:35 -0500] [Job 11] Adding start banner page "none".
I [10/Dec/2007:20:23:35 -0500] [Job 11] Adding job file of type application/postscript.
I [10/Dec/2007:20:23:35 -0500] [Job 11] Adding end banner page "none".
I [10/Dec/2007:20:23:35 -0500] [Job 11] Queued on "SUTTER_WG" by "kristophermiller".
I [10/Dec/2007:20:23:35 -0500] [Job 11] Started filter /usr/libexec/cups/filter/pstoappleps (PID 335)
I [10/Dec/2007:20:23:35 -0500] [Job 11] Started filter /usr/libexec/cups/filter/pstocupsraster (PID 336)
I [10/Dec/2007:20:23:35 -0500] [Job 11] Started filter /usr/libexec/cups/filter/rastertoepson (PID 338)
I [10/Dec/2007:20:23:35 -0500] [Job 11] Started backend /usr/libexec/cups/backend/smb (PID 339)
E [10/Dec/2007:20:23:36 -0500] [Job 11] cgpdftoraster unsupported colorSpace: colorSpace = -1, colorOrder =1, bitsPerColor = 1
E [10/Dec/2007:20:23:36 -0500] [Job 11] cgpdftoraster: got an error from cupsRasterInterpretPPD
E [10/Dec/2007:20:23:36 -0500] [Job 11] No pages found!
E [10/Dec/2007:20:23:36 -0500] PID 338 (/usr/libexec/cups/filter/rastertoepson) stopped with status 1!
I [10/Dec/2007:20:23:36 -0500] Hint: Try setting the LogLevel to "debug" to find out more.
E [10/Dec/2007:20:23:36 -0500] [Job 11] Job stopped due to filter errors.

My problem is that after printing the first photo or picture, when I come to print a second, both the Colour Management and Epson Colour Controls are greyed out and showing No Colour Management

I have recently purchased a Mac computer (updated to Maverick) to go with my Epson Stylus Photo RX500 printer which has given excellent service with my old Windows computer. However, when trying to print pictures or photos via Photoshop Elements 11, the best results I can get are using the Colour Management and Epson Colour controls in the printing options box.
My problem is that after printing the first photo or picture, when I come to print a second, both the Colour Management and Epson Colour Controls are greyed out and showing No Colour Management, The only way I can reset the controls is to shut down the printer and computer and restart.
Could there may be a setting somewhere that I need to adjust please? I have been in touch with Epson and they say that the Epson Colour controls are part of the Photoshop Elements software but a post on the Adobe forum brought no results and I am unable to contact Adobe.
<Edited by Host>

Hello Garry. Thanks for the reply. I guess I should have used a different title from "How do I post a question?" That should come after trying to resolved the colour settings first. However, to answer your question, after experimenting with all the different settings in Photoshop Elements and Epson software, I now start with PSE11 Colour settings then click "no colour management" then after clicking Print, I choose "More Options/Colour Management/Colour Handling/Printer Manages Colour" then I choose "Page Setup/Layout/Colour Matching" which then shows Epson Colour Controls but I also choose "Layout/Colour Management" which then shows "Colour Controls/Mode" I then of course choose an Epson printer profile depending on the paper I am using. I get good results but as I said, the Colour Matching and Colour Controls are then greyed out. Hope that makes sense.

I have a brother laser hl 1110 printer. the double side page printing option is greyed out and unusable. anyone know a fix for this? thanks. it prints single side okay.

Similar Messages

Maybe you are looking for