I have a c310, when printing photos I am getting red tint in every photo I print.

I have cleaned the print head. I have tried different papers including HP premium photo and still get the red.
This question was solved.
View Solution.

Hi cart1775,
Sorry to hear your having this issue. Here is a link that may be able to help (some of which you may have already done):
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02187415&tmp_task=solveCategory&cc=us&dlc=en&ju...
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

Similar Messages

Hi When going from Develop module to print module a white boarder appears on screen which also prints via my epson r3000 printer. I can get round this by exporting photo to Elements and printing from there but can i get rid of the boarder and print from l

Hi When going from Develop module to print module a white boarder appears on screen which also prints via my epson r3000 printer. I can get round this by exporting photo to Elements and printing from there but can i get rid of the boarder and print from lightroom?

In the printer driver (accessed through the Page Setup button) set the Advanced tab to borderless. Then in the right hand panel under Layout set all the margins to zero.

When i click on my external hard drive the screen goes dark and a msg pops up saying i have to shut down my computer by holding the power button and then restart it. when i do that i get the same result every time. it worked perfectly last night..

when i click on my external hard drive the screen goes dark and a msg pops up saying i have to shut down my computer by holding the power button and then restart it. when i do that i get the same result every time. it worked perfectly last night..

These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Ifou don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.
I know the report is long, maybe several hundred lines. Please post all of it anyway.

My wife and I share a computer but we have separate Facebook accounts. How do we get iPhoto to share the photos with a second Facebook account?

My wife and I share a computer, but we have separate Facebook accounts. How do we get iPhoto to share photos with a second Facebook account?

iPhoto -> Preferences -> Accounts. Add a second ccount for hers. Log out of one to use the other.
Regards
TD

When composing or replying I get red dots under each word

When composing anything, including this message I get red dots under each and every word, and don't know how to get rid of it

Hi kudu77,
It sounds like an issue with the spell checker dictionary. Please take a look at the [[Using the spell checker]] Knowledge Base article. Try right clicking in a text box and going to ''Languages > English (US) or en-US''. If you don't see that, then it probably means you don't have a dictionary installed and you should add one.
Hopefully this helps!

I have a canon MX7600 multifunction printer. My security setting allow connection with the printer. If I disable the firewall it works fine. If the firewall is running I get a dialog box every time I print asking for permission. How do I fix this?

I have a canon MX 7600 multifunction printer. Each time I print I get a dialog box asking for permission to allow connections to the printer. This box stays on my screen for a few seconds, if I don't click allow I get a communication error which then requires me to delete the job and start over. I contacted Canon and proceeded with their suggestions to no avail. They now say it is an Apple issue. My security settings are set to allow connection to the canon printer. If I disable the firewall it works fine, once I enable the firewall the problem returns. This issue is a royal pain. Any suggestions on how to fix it short of buying a new printer?

jsavage9621,
It pains me to hear about your experience with the Home Phone Connect. This device usually works seamlessly and is a great alternative to a landline phone. It sounds like we've done our fair share of work on your account here. I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you. I look forward to speaking with you.
TrevorC_VZW
Follow us on Twitter @VZWSupport

Whenever I open my Photo Booth I get a message saying that Photo Booth has no save location and that I need to pick one...It won't let me pick a folder, how do I just set Photo Booth to automatically save to iPhoto?

Please help!

I have already copied my photographs to the a library manager but when I tried to reuse iphoto and import the photos back into iphoto, it would not let me.
You can't "copy" your photos to the "library manager", there is just no way to any such thing.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

How did I get duplicates of nearly every photo in my iPhoto library? How do I get rid of them?

I have about 2500 photos in my library. At least 1000 of them are duplicates. I don't understand how they got there. I'd like to delete them, and I'd like to keep this from happening in the future. They are randomly scattered throughout my library, usually in blocks of 2-20 photos. I tried an app that is supposed to delete dups, but it only found about 20. I think the file names are somehow different. The only way I have found to identify and delete them is to (laboriously) try to remember a group and then scroll down until I find dups of the ones I remember. This could take years and is very difficult with so many photos in the library.

I have about 2500 photos in my library. At least 1000 of them are duplicates. I don't understand how they got there. I'd like to delete them, and I'd like to keep this from happening in the future. They are randomly scattered throughout my library, usually in blocks of 2-20 photos. I tried an app that is supposed to delete dups, but it only found about 20. I think the file names are somehow different. The only way I have found to identify and delete them is to (laboriously) try to remember a group and then scroll down until I find dups of the ones I remember. This could take years and is very difficult with so many photos in the library.

When connected to Netflix I get an annoying beep every 6 to 10 minutes. Why?

I have been a member of Netflix for several years. However, in the last 2 weeks whenever I am connected to the site, to watch in-stream movies, the computer sounds a beep at intervals, while I was immersed in the plot ('''was''' because I am not anymore in it due to the beeping), as if I was talking to a jailbird.
Netflix tells me they didn't change anything in my subscription.
What is the problem?

I have been experiencing these beeps off and on when streaming video, but it isn't the browser, as I generally use Chrome and my phone (Dolphin). It went away for a little while, but now it's back.

PS6; print; PS print settings; color management; printer profile: how to get paper profile to "stick" for multiple prints of same paper type, ie Matte. Mine reverts to Luster as the default.

see question

Hola Gustavo,
your task is for me not quite clear. I can see two scenarios:
a) Calibrate the press for ISONewspaper26v4 ink (your standard process) on salmon colored paper.
    Print the target by press on this paper, measure and build the profile. There is no problem so far.
    But preparing CMYK data with this profile for printing by press requires a very complicated gamut
    compression, becauses the gamut of the actual process on salmon paper is small and excentric
    in Lab. As mentioned in my previous post.
b) Simulate the appearance of press prints on salmon paper, disregarding the salmon color by profiles.
    This shall be done in your case by a toner printer.
    The toner printer has to be calibrated with white paper. As a result one gets a valid Printer Profile.
    The proof printing happens for a CMYK file, for instance a PDF/X-1a file so:
    Input profile: ISONewspaper26v4
    Output profile: Printer Profile
    Printed on salmon paper!
    The printer profiling converts the toner printer into a more or less reliable proof printer. This has nothing
    to do with colored paper.
Page 11 shows an example:
http://docs-hoffmann.de/oki-ps-28082005.pdf
Best regards --Gernot Hoffmann

My bookmark toolbar showa two line oc print, how do iI get it to show one line of print

'''bold text'''

Please post a screenshot of that issue.
https://support.mozilla.org/en-US/kb/how-do-i-create-screenshot-my-problem <br />
It is best to use a compressed image type like PNG or JPG to save the screenshot and make sure that you do not exceed a maximum file size of 1 MB.
Then use the '''Browse ....''' button below the '''''Post a Reply''''' text box to upload the screenshot.

I have two related keyword problems. Some keywords get "broadcast" to every photo in an event. It's almost impossible to delete these keywords from individual photos. I select the keyword, hit delete and it reappears after a few seconds.

I have two related problems with keywords in iphoto 11. Sometimes, keywords get magically "broadcast" to every photo in an event or album. It's difficult to delete these keywords. If I select one and try to delete it it vanishes. About half the time, it reappears again either in a couple of seconds or after I go to another photo and then return to the previous one. When thios happens, I need to delete the keyword two or more times before it actually vanishes. With several hundred photos in an event that all have a bad keyword, this is a tedious process. I've tried rebuilding the library once, but with only the first (I think) option checked on the rebuild.

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

How to get existing albums to iCloud photo library

My boss is a home builder and he needs albums of homes across his devices and I'm looking for a solution for getting the albums of photos across the devices. Any thoughts? The photos are currently synced from iTunes and when I turn on iCloud Photo Library, it says its going to delete those photos. Whats the best way to get them in the mix?

Given that it is a beta product - which i certainly understand - it still doesn't seem to work as it has been described.
I have updated to iOs 8.1 on my iPhone 5 and iPad 4; I have approximately 1000 photos which are in albums on the devices, and which I have backed up to my computer. Here is what happens when I turn on iCloud photo library:
I get the warning about removing photos from the device and downloading optimized versions back to the device.
The upload begins, but only selects 50 or 60 photos, and NOT just limited to those which remain in my camera roll.
Only that upload lands on icloud.com. The other 900 or so just seem to drop into space, and can only be found on my computer.
Only those 50 or 60 are downloaded back to the device.
I swear with great vigor and volume, and restore my computer back up to the device.
I have the sense that there is some obvious step I'm missing, because this just does NOT seem to way this service is supposed to work, and I would think even a beta would work as described. But I've tried this multiple times on both devices, with the same result. I had great hopes that iPL would work as it seemed to be described and get me out of backing up to my computer, to Google Plus, and to Onedrive. Apparently not, at least not yet.
Would be deeply grateful for any advice.

When does a promotion/pricingmodel gets applied to an Item

Hi,
I have a question when does a pricingmodel/adjustment get added to an Item/Product/Sku.
I have a configurableSubSku item added to cart, and for the same sku i have added a promotion say like 50% off. But it doesn't gets triggered at all.
So I wanted to know where does the item discounts happen in ootb. Incase if i want to customize it add the promotion to the sub skus how should i do it.
Thanks.

In response to below question:
I have a question when does a pricingmodel/adjustment get added to an Item/Product/Sku
Pricing Engine Service is responsible for pricing in ATG.
All global promotions gets loaded periodically by Pricing Engine Service.
When Order is modified(item added, quantity changed, etc) or RepriceOrderDroplet is called.PriceEngineService Comes in picture.
Pricing Engine Service calls individual Engines(ItemPricingEngine, OrderPricingEngine,ShippingPricingEngine, TaxPrcingEngine).
Individual Engines perform following tasks
load individual level promotion
determine right pricing method
invoke precalculator
Call qualifier
Apply discounts
I have never worked on configurable sku, second answer wait for some other reply.
Thanks,
Nitin.

I can print, using AirPrint, just fine. But how do I change Printer settings using my Ipad, like page orientation and 2 sided printing?

When printing an email I get the option to select 2 sided printing but not page orientation. When trying to print a picture from my picture library I don't get either option. I am using a HP printer with AirPrint. Thanks, Dave

Whow what a shame, I thought this iPad was going to be terrific. Guess I'll get out my trusty Cannon from now on, lots less hassle.
Thank you for the reply!

I have a c310, when printing photos I am getting red tint in every photo I print.

Similar Messages

Maybe you are looking for