I have a C310A and it has started making a dinging noise! Ink is full it prints from the desktop !

I have a C310A and it has started making a dinging noise! Ink is full it prints from the desktop, any ideas?

Hello Lahaina,
I will assume that you have power cycled the printer already, does that Correct the issue for a period of time? or does it continue as normal?
I am an HP employee.
__ if this Solution has helped Please Mark as Resolved and feel free to Provide a Kudos__

Similar Messages

Recently my mac has started making faint clicking noises just like a fan catching something as it spins round, it is only faint but i can notice it -any suggestions please

Recently my mac has started making faint clicking noises just like a fan catching against something, it is only faint but loud enough to hear. any suggestions please

While it could be a cooling fan, a noise like that is usually a sign of a dying hard drive. Back up everything immediately. Make immediate backups of any new documents you create after the full backup.

WhenI print from firefox on a Mac everything comes out 50% too light, if I save the image and print from the desktop it looks fine. No problem either printing from FF with Win7. How do I fix FF on the Mac?

My iMac runs bootcamp, so I have both OSX and win7 available. I run the latest Firefox on both as my primary browser. The printing looks like the ink is running low, but when the same image is printed from other desktop apps the printing looks fine.

Hi, Jordan -
Welcome to Apple's Discussions.
If the original drive in the newer Mac is a Western Digital, its jumpers may be set to Single, which WD drives often use when there is only one device on the bus. When a second drive is added, the jumpers on the original must be reset to Master.
OS 9's utility is named Drive Setup - you should find it in the Utilities folder on the hard drive. Run that. Select the added hard drive in the list, then select Mount Volume from the Functions menu.
You can also check with that utility to see if the OS believes the drive has been set to automount at boot. Again, select the drive in the list. Then select Volume Settings from the Functions menu - there's a checkbox in that screen to set automount (for freshly initialized drives, that's turned on by default).
Also, try running Disk First Aid (should also be in the Utilities folder). Let it have a look at the second drive, and repair anything it can.
Apple System Profiler should report the format of all drives it sees. Is the format of the drive from the old Mac stated as Mac OS Standard, or as Mac OS Extended?

I have windows 7 and when i start up i tunes i get a message..."The registry settings used by the i Tunes drivers for importing and burning CD's and DVD's are missing. This can happen as a result of installing other CD burning software. Please reinstall i

when i start up i tunes i get the message,"The registry settings used by the i Tunes drivers for importing and burning CD's and DVD's are missing. This can happen as a result of installing other CD burning software. Please reinstall i Tunes." I tried reinstalling and still get the same message. when I ran the i Tunes diagnostics is says that the high and low filters are missing.
when i was having trouble with my optical drive(before Dell sent me a new one) the dell tech support representative had me delete some reg. files to try to fix the problem. I was told this would not affect the new drive when i install it or any of my existing programs. here is what he had me do....
Agent (CLKsmb_RyanJose_224427): "Click on Start
Click on Run
Type in REGEDIT
Click on OK
Click on the plus sign next to HKEY_LOCAL_MACHINE
Click on the plus sign next to SYSTEM
Click on the plus sign next to CurrentControlSet
Click on the plus sign next to Control"
Click on the plus sign next to Class
Click on the plus sign next to {4D36E965-E325-11CE-BFC1-08002BE10318}
On the right pane, click to highlight Upperfilters
Right click on Upperfilters
Click on Delete
Click on OK
On the right pane, click t
o highlight Lowerfilters
Right click on Lowerfilters
Click on Delete
Click on OK
Right click on Silent Install
Click on Delete
Click on OK
Close the Registry Editor
Reboot the computer
how can i get this message box to stop poping up every time i open i tunes? otherwise i tunes works fine. it still rips cd's. I just keep getting this message even after reinstalling i tines.
thanks,
chris

Refer to this article to fix:
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/TS3299

My ipod classic has started making a mewing sound and all it does is scroll through the songs. It will not play except when connected to my computer. I tried resyncing and that did not work. How do I fix this problem?

My ipod classic has started making a mewling sound and all it does is scroll through the songs. It does not play on my Bose sound dock or through earbuds. It will play when connected to the computer...but that makes it hard to take it on a walk with me I thought it might be a synching problem so tried that--still doesn't work. How do I fix this problem with out restoring it to the factory setting? I do not want to lose all my music content as some of it I cannot replace easily. Please help with suggestions and advice. Thanks. Karen in GA

Have you recharge your iPod for at least 2 hours, preferably till the Full charge Battery symbol comes ON.?
See this Apple support Article
http://www.apple.com/support/ipod/five_rs/classic/
You did not by chance bought the Hello Kitty special edition?
Have nice day!

The back button no longer works. I have disabled all add-ons, rebooted & reset the defaults for the browser and nothing has changed. This happens on all webpages.How do I get the back button to light up again?

the back button no longer works. I have disabled all add-ons,rebooted & reset the defaults for the browser and nothing has changed. This happens on all webpages.How do I get the back button to light up again?

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
*Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
Another possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.com/kb/Bookmarks+not+saved#w_places-database-file

Hello I am on a macbook pro (retina IOS 9) i have installed xcodes and command line tools but codeblocks does not compile, terminal gives this message /Users/MacPc/Desktop/Untitled1: Permission denied      any one has a solution

Hello I am on a macbook pro (retina IOS 9) i have installed xcodes and command line tools but codeblocks does not compile, terminal gives this message /Users/MacPc/Desktop/Untitled1: Permission denied      any one has a solution?? please...

Back up all data before proceeding.
This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
          Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
           ▹ Restart
from the menu bar.

I have recently changed internet supplier. My ipad has started to ask me to sign into icloud. It displays the old suppliers address. How can I change that?

I have recently changed internet supplier. My ipad has started to ask me to sign into icloud. It displays the old suppliers address. How can I change that?

Login at http://appleid.apple.com/ and change the email address associated with your AppleID.

I updated iOS 7 and my contacts were ok then they suddenly disappeared a few weeks after updating. I have no idea if it has anything to do with iOS 7 but when I email someone the contacts are there. When I open the app they are gone. What happened?

I updated iOS 7 and my contacts were ok then they suddenly disappeared a few weeks after updating. I have no idea if it has anything to do with iOS 7 but when I email someone the contacts are there. When I open the app they are gone. What happened?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Hi, I just bought the new i phone 5. I have plugged it into my computer a few times to run the back up and it has previously worked fine. When i try to connect it into the computer it is not recognised and will not do anything at all??

few times to run the back up and it has previously worked fine. When i try to connect it into the computer it is not recognised and will not do anything at all??

By calling iPod tech support while you are under warranty. You also have 14 days to return it w/no questions asked for a replacement or your $$$ back.

Hello, I have a document and it has a page border around it.. I have been filling this area in such

Hello, I have a document and it has a page border around it.. I have been filling this area in such as a photograph that goes over two pages. I wanted to know if the items that go into the border are printable, or will there be a white border around it? Thank you in advance

Depends entirely on the device youuse to print and the size of the sheet.

I have an ipad and it has iCloud is unable to access account and it won't let me go to settings or use any buttons

I have an ipad and it has iCloud is unable to access account and it won't let me go to settings or use any buttons. How do I fix this?

Go to Settings>General>Restrictions>Accounts (near the bottom) and set this to Allow Changes.

I have received a notice that my forms central account has lasped due to being unable to charge credit card. I have changed cards and will update, but do not want to pay a full subscription since Forms is ending. I am in the middle of a process that wil

I have received a notice that my forms central account has lasped due to being unable to charge credit card. I have changed cards and will update, but do not want to pay a full subscription since Forms is ending. I am in the middle of a process that will end in a month. What do I do to be able to finish this process???

It is a bad situation. Your credit card expired but you cannot change it because FormsCentral is retiring.
Please consider moving your forms to JotForm right away. It takes a few minutes to do it using JotForm new Import Wizard:
http://www.jotform.com/formscentral/

I have MacBook Pro and whenever I start Aperature 3 it stays on for about 5 minutes then it shuts down with an error of shutting down unexpected... anything??

Hello, I have MacBook Pro and whenever I start Aperature 3 it stays on for about 5 minutes then it shuts down with an error of shutting down unexpected... anything??
Also does anyone know how to take something from one picture and add it to another in aperature?
Thank you!!!

I had the exact same problem. Here is what an Apple Support person told me to do - and it worked like a charm!
Go to your APPLICATIONS Folder. Find a folder within that folder called TOOLBARS. Remove the ENTIRE folder. Once you remove that folder, your Aperture should work perfectly.
There is something in that folder that you don't need that messes with Aperture. Try it. Mine worked perfectly!

I have 3 computers and one has the "clear search history" line greyed out. I can't get this to work.

# Question
I have 3 computers and one has the "clear search history" line greyed out. I can't get this to work.

Is Tools > Options > Privacy > History: "Remember search and form history" enabled?
If that is disabled then there is nothing saved and nothing to delete.<br />
You still see suggestions in the drop down list if showing suggestions is enabled.
*http://kb.mozillazine.org/Search_Bar

I have a C310A and it has started making a dinging noise! Ink is full it prints from the desktop !

Similar Messages

Maybe you are looking for