I have a C610 issue on my Canon PIXMA ip3600. What can I do to fix this?
Can someone help me with a C610 error on my Canon PIXMA ip3600 printer?
Hello luckydogs.
This error may occur if one of the ink tanks was not seated properly or when there is a loose object stuck inside the printer. Please try the following:
1. With the cover of the printer open, unplug the power from the back of the printer or the wall.
2. Look for any loose objects or packing material in the printer, clear if necessary.
3. Try gently moving the ink tank holder as close to you as possible. Try pushing the closest ink tank down. Once clicked into place, try moving the ink tank holder closer, repeat as needed. If you meet resistance, do not attempt to move the ink tank holder any further.
If the issue persists, please contact our support group using the "Contact Us" link below for additional assistance.
This didn't answer your question or issue? Find more help at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
Similar Messages
-
Since installing 10.7.3 my downloads say that I do not have enough space on my computer for the download. These downloads are never more that 200 megs or so and I have 270 gigs left on my hard drive. Somehow the remaining space on my hard drive is not being correctly read. What can I do to fix this? I have run permissions repair several times, but to no avail.
Th downloads do not finish. I am dowloading to a file on my desktop called MUSIC, but it first starts to download to my desktop and then I move it to the MUSIC file also on my desktop and I have been doing this without incident using 10.7.2 as well as 10.7.1 and 10.7.
-
For some reason my Quicktime will not play a mpg file. It says that my computer does't have the proper codec to support the file.
The info in this thread should help you - https://discussions.apple.com/thread/3648239?start=0&tstart=0
-
Downloaded IOS 7 and now I do not have a dictionary in iBook. This is very frustrating. What can be done to fix this issue?
I've got to agree with Allan. It sounds like the hard drive is corrupt at least. It's possible it might be physically failing. Without backups, it's possible your data is already gone. You need a professional to help you.
If you do not have an Apple Store near you or simply don't have the time to spare, there are some things you can try, but you must understand that it's possible these things could make the chances of recovering your data worse than they already are. Perform the instructions to follow at your own risk!
First, you can try repairing your hard drive with Disk Utility. If that works, see if you can start up the machine. If you can, the very first thing you need to do is back up any data you don't want to lose. You may still need to take other steps, as your system may be damaged as well, but getting the data is the important part.
If Disk Utility cannot repair the problems, you can try DiskWarrior. It can repair problems that Disk Utility cannot. However, it also increases the risk of destroying your data if it fails. If it works and you can start up the machine, do the same as I advised for following success with Disk Utility.
If repairs (with either) were successful, but the machine still won't start up, you can try reinstalling the system. Hold down command-R at startup and then just install right on top of the existing system. If all goes well, you'll be able to start up afterwards and can get your data backed up. If all goes badly, it'll further decrease the chances of getting your data back.
If neither can repair the damage, you're in bad shape. You will need a professional to help you, unless you are willing to lose all your data. -
I'm having a huge issue with itunes locating my missing files..and it's too many for me to locate 1 by 1..It says I'm missing over 3,000 songs and They are all in my music folder..What can I do to fix this issue? I've looked at all the tutorials on youtube and none of it works. I recently got a new computer and I Back-Up all my music and itunes playlist and I import it on my new computer with the new itunes and I go to play a few songs, it says I'm missing them I locate a few but it's still like 3,000 missing and again they are all on the computer and in one folder..Please Help !
I did that and nothing changed half my songs still have examination marks beside them
I also just tried dragging my folder of music int he playlist and it duplicated all of my songs? My playlist was at 5k now it's at 10k becuz of 3 duplicates of songs. Is there a way to delete multiple duplicate files? -
I have an iPhone 4S and for some reason when I go to turn my wifi on sometimes it's greys out and Won't let me turn it on so what can I do to fix this ???
If the steps in the article TJBUSMC1973 linked didn't resolve your issue, then the next step would be to have your phone serviced at an Apple store. Good luck
-
Since upgrading to 11.1 ITunes keeps freezing, I have windows 7 64 bit. I have tried opening in safe mode and creating a new user, I have also uninstalled and reinstalled. What can I do to fix this? Its very frustrating.
Hey pbonnett!
Here is an article that will help you troubleshoot these issues with iTunes on your Windows computer:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Take care, and thanks for visiting the Apple Support Communities.
-Braden -
i have a classic that seems to be stuck in restore mode, the screen says "do not disconnect'' and i can't restore using itunes. i have tried resetting it and still no good, what can i do to fix this problem ?
Be good to know what the diagnostic results are.
I've also just run into an issue where I couldn't restore an iPod with a corrupt file system, and the "super fix" in that linked article wasn't working for me. I've run across a potentially useful workaround.
iPod Classic went on the fritz today just after syncing. Couldn't restore via iTunes, kept getting 1439 errors, Windows wouldn't format as FAT32, claimed the "Volume is too big for FAT32". Finally tracked down EaseUS Partition Master Home Edition (Free) and formatted as FAT32 with 128k clusters. The iPod is filling back up again. Might be worth a shot here...
tt2 -
Hi, I rented a movie in Apple TV, i Have tried to watch it several times but it says there is a problem downloading the content, my movie expires in few days, what can i do to fix this?
Hello chipotles
If the rental is not working, then follow the steps in this article to report an issue with your purchase. And then after that try the to rent the movie again.
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/HT1933
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
Every time that I try to download my music from I tunes an error message comes up it says, ( err = 450) Make sure that your network connetion is active and try again. What can I do to fix this problem, I have tried everthing that I-tunes has told me but with no luck. Thanks
Try disabling your parental controls. Does that help with the 450?
iTunes: Using Parental Controls -
my sound has stopped working i have speakers plugged in but computer doesnt register or recognize them. the volume is on mute and grayed out ...will not let me change,what can i do to fix this problem....i have tried unplugging and plugging back in and reset and headphones...nothing works..how do i get my sound back?
OS X Mountain Lion: If you can’t hear sound from your speakers
Read the "If you’re trying to listen through external speakers" section. -
I have an iPod Touch version iOS 4.2.1, 8 G capacity, and whenever iTunes tries to sync my iPod, I get an error message saying "Mobile Backup has encountered a problem and needs to close", and the sync fails. I have tried deleting and reinstalling iTunes, and the same thing happens. What can I do to fix this problem?
Try:
iOS: If you can't back up or restore from a backup in iTunes -
does anyone have a problem with the new page software? I am currrently running into the same problem with the old pages software re-appearing and any document that I had used with the new update, will not open. The system requires me to attempt to download a new version of page, when the newiest version has aleady been download and has been in operation.
What can I do to fix this problem? I desire to use the new version at all times.
Please help
JamesYou just have to be particular with which Pages version you are opening the document. use Right click on the document and choose the right version of Pages.
-
I just got an apple at&t iphone 4 and I have it unlocked. But I want to connect it to t-mobile, so I trimmed my sim card and once the phone was unlocked I inserted the sim and it says no sim, activation error. What can I do to fix this? What is wrong?
JayleneC wrote:
Wait.. Everything on iTunes worked, but when I insert my sim it brings me to the start were I have to choose my language, etc... Then it says activation error.. Are you sure it's the sim card?
As you addressed me that is exactly what I said
Dodgy trimming ?? get a new micro sim from T-Mobile -
When I try to load certain webpages, a message says I have to have Javascript enabled with instructions on how to enable Javascript. Javascript IS enabled, but I still get the same message. What can I do to fix this?
To avoid confusion: http://kb.mozillazine.org/JavaScript_is_not_Java
http://kb.mozillazine.org/Java <br />
http://kb.mozillazine.org/JavaScript
Maybe you are looking for
-
In-App Purchase Details Access
Is there a way to access In-App purchase Details of an IOS app in an Objective Program
-
My laptop will only recognise my AirPort if it is plugged into my wi-fi hub via ethernet cable
This completely defeats the point of my getting the AirPort because i bought it exclusively to stream music from my laptop to my stereo without the use of any long wires. And as my Wi-Fi hub is in another room, it would mean that i'd have to trail a
-
Report list duplicate customers
Is there a standard SAP way to check whether the customer database contains duplicate entries? Customers has been created for a long time (9 years I guess) and we suspect that the database contains several double entries since there was no check at a
-
Datagrid - doubleclick row - change value in cell
Hi, I have a datagrid populated via HTTPservice where one column entitled Selected initially contains the value of 'yes' for all rows. I want the user to be able to double-click on the row to toggle the value between Yes and No. I can trap the double
-
How to configure address-2-name mappings in Tiger Server ?
Our primary name server is Debian Linux (thank God). On this box we have address-2-name mappings file. We are using Tiger server as secondary(slave) name server. In the Secondary Zones tab, I entered zone names and their primary name server (debian).