I HAVE A CANON DIGITAL REBEL EOS 300D CAMERA. THE CF CARD WAS PUT IN THE CARD SLOT WRONG &DAMANAGED

I HAVE A CANON DIGITAL REBEL EOS 300D CAMERA. THE CF CARD WAS PUT IN THE CARD SLOT INCORRECTLY AND THE CARD SLOT WAS DAMANAGED. CAN THIS BE REPAIRED. AND HOW MUCH.

Hi Ronald,
I'm sorry to hear that the pins in the memory card compartment of your Digital Rebel have been bent.
Because the service life for this camera has expired, Canon no longer offers service for it.  I'm sorry for the difficulty this causes.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

  • Windows 7 64-bit driver for Canon Digital Rebel XT

    How do I interface my Canon Digital Rebel XT with a computer running Windows 7 64-bit?

    You are correct.  Canon does not provide a driver for Windows 7 64-bit.  You have to change the communication mode in your camera and then use Windows Photo Gallery or other software to transfer the photos.  Here is the response that I received from Canon tech support (it works):
    "To connect your camera to a Windows Vista or Windows 7 computer, you'll need to change the communication mode.
    To set your camera up for this, please do the following:
    With the camera disconnected from the computer, turn the camera on.  Press the "Menu" button.  Now select the [Wrench, Hammer, 2] tab.  Scroll down to "Communication" and press the "Set" button.
    Select the [Print/PTP] and press "Set".  This process is more completely described (and illustrated too!) on page 121 of your Digital Rebel XT Instruction Manual.
    Now connect your camera to your computer and turn the camera on.  Your computer should now recognize and have access to your Digital Rebel XT.
    Unfortunately, Canon software cannot communicate with the Rebel XT when operating in this mode.
    You may download your pictures using Windows Photo Gallery, or you may use a card reader to download images.  If you haven't already done so, you may retrieve and install this program from Microsoft's download.live.com."

  • Best RAW Image Processing for Canon Digital Rebel XT - PS Elements 6??

    I'm new to RAW image processing and image editing. I just bought a Canon digital Rebel XT. It comes with Canon Digital Professional 2.1 software. I also have Aperture upgraded to 1.5.6, which I have tried on JPEGs from an earlier digital camera that only gave me JPEG files. Since Aperture doesn't give me as much editing diversity, I purchased the newly released Photoshop Elements 6 (and I don't have any experience with Photoshop). Thus, I now have 3 different RAW image processors. Does anyone have some experience with these 3 to suggest which one is best? The learning curve looks pretty steep, and it would be helpful to know which of these to focus on, at least initially.
    Thanks in advance for the help!

    Disgruntled3x wrote:
    I'm new to RAW image processing and image editing. I just bought a Canon digital Rebel XT. It comes with Canon Digital Professional 2.1 software. I also have Aperture upgraded to 1.5.6, which I have tried on JPEGs from an earlier digital camera that only gave me JPEG files. Since Aperture doesn't give me as much editing diversity, I purchased the newly released Photoshop Elements 6 (and I don't have any experience with Photoshop). Thus, I now have 3 different RAW image processors. Does anyone have some experience with these 3 to suggest which one is best? The learning curve looks pretty steep, and it would be helpful to know which of these to focus on, at least initially.
    Thanks in advance for the help!
    Now that you have the Canon DPP installed i would update it to version 3.2 which is at Canons site.
    Now, DPP has the best conversion quality for Canon RAW files. I used it a lot and although limited in what adjustments you have, it offers the essential adjustments and I liked it a lot.
    Aperture also does a great job with Canon RAW files, but version 2.1 is even better
    Photoshop Elements 6 I have not used but I do use Photoshop CS3
    Personally for RAW I prefer Canon DPP over Adobe Camera Raw
    And I prefer Aperture over Adobe Camera RAW too.
    Now that Aperture has improved it's RAW conversion immensely and it offers tethered shooting with the XT, I am using Aperture exclusively to process RAW files.
    An application like Elements or Photoshop CS3 are great if you want to do more advanced layered work and layer blending effects, however, for sepia , black/white, general image color & saturation or desaturated effects and good RAW conversion? I am all about using Aperture.
    Now although I use it on a MBP, I will only do edit and color judging when attached to a cinema display or any good LCD with a DVI connection to the laptop.
    But in conclusion, for RAW adjustments may as well focus on Aperture and use Elements for the few edits that Aperture does not allow.

  • Canon Digital Rebel XTi RAW support?

    I just purchased a Canon Digital Rebel XTi and cannot get RAW files to import into iPhoto. I even tried the Image Capture trick (downloading to disk and then importing) to no avail. The file format is listed as CR2, which is supposed to be supported. Is it possible that Canon is using a different variant of the CR2 format for this camera and that I'll have to wait for another iPhoto or OS X update?

    I'm having the same issue - RAW images (both sRGB and AdobeRGB) from the new Rebel XTi will not open in iPhoto.
    It is important to note that the same images will not open in Photoshop CS2, nor with Adobe Bridge 1.0 and even with the updated Bridge 1.0.4.6.
    I would hope that Apple will recognize that there is a significant difference in file format from the Rebel XT and the Rebel XTi - and that Apple will issue an update to iPhoto accordingly.
    For now, looks like Rebel XTi users will need to limp along on Canon's proprietary (and u-u-ugly) software provided with the XTi.
    Jason

  • Camera Connector+Canon Digital Rebel XT or SanDisk's reader

    Does anyone know if Apple's iPod Camera Connector work with Canon Digital Rebel XT camera or with SanDisk's ImageMate CF Reader?

    I have a answer for all of you regarding this question.....
    I decided to give a risk and buy that connector and check it out by myself. Well, it doesn't work with SanDisk ImageMate CF Reader, BUT it WORKS with Canon Digital Rebel XT ! All you have to do is change in your menu option from PC to Print. I bought 5G iPod and everything works fine. That only big minus, it's slooooow. Downloading photos to you iPod is just super slooow.

  • RAW Images from Canon Digital Rebel XT

    Does (or will) iPhoto 5 support the RAW files from the Canon Digital Rebel XT?

    Hi David,
    I have a Canon 20D which is supported in RAW mode.
    The following dpreview report outlines the CD software download Canon Zoombrowser EX:
    http://www.dpreview.com/reviews/canoneos350d/page16.asp
    It has a RAW image task which comes as a plug-in with the supplied software.
    If the RAW can only be manipulated in the Canon software, a JPEG copy could be saved to iphoto.
    I do agree a specific standard would be very helpful.
    Best wishes,
    Scott

  • So if I have my Canon 70D set to sync with the iPhone ...

    So if I have my Canon 70D set to sync with the iPhone, you're saying it also will sync with the iPad? What application would I have open on the iPad to accept the wifi transfer of photos, since there is no Canon remote app for the iPad?

    Hi...
    If you delete the backups it will not delete any content from their device, however the data will be removed from iCloud.
    It will also prevent the devices from backing up to iCloud in future, unless this is re-enabled.

  • Canon Digital Rebel XT NOW supported!!!!!!

    The 10.4.3 update has now updated the system to support the .CR2 raw files that the Digital Rebel XT makes. I notice that I could open them in Preview.app now so I figured I would give iPhoto a try and yup they import just as expected.(Finally!)
    Hope everyone that has been waiting for this is happy. I know I am.
    Matt

    As long as the photo in iPhoto has the little RAW under it when I drag it from the library it shows up in photoshop as a raw image.
    You might try reverting to original image before you try to drag it out of the library. The problem I have with this is when you are done and save it back iPhoto doesn't seem ti understand that this is an edited photo. So it looks like you will have to re-import the edited image.
    Matt

  • Photoshop CS Plugin for Canon Digital Rebel XT

    I'm trying to access RAW files on my digital Rebel XT through Photoshop CS. I can't seem to find the right version of plugin. I tried 2.4 but it doesn't look like it supports Digital Rebel XT. Can anyone point me in the right direction?

    The DNG converter is a stand-alone program that does not rely on Photoshop or any other program to do its thing. It comes packaged with the Camera Raw plug-in, and is updated whenever Camera Raw is updated. Using the converter is very simple:
    1. Extract the DNG converter from the zip file and place it wherever you want. The desktop is a good choice.
    2. Locate a folder containing raw images. This can be a folder on your hard drive or a card from the camera.
    3. Drag the folder containing the raw images and drop the folder onto the DNG converter icon.
    4. The DNG converter will start. Choose a destination for your DNG files. Then click on the OK button.
    When the DNG converter is finished, just close it and then open Bridge and locate the folder where you told the DNG converter to put your DNG images.

  • Aperture stripping 8 pixels from Canon Digital Rebel CRW files?

    hi,
    I just wanted to see if anyone else was having the issue I am. I'm using Aperture with CRW files from a Digital Rebel, which are 3072x2048 in resolution. However, upon import into Aperture, images are listed as 3072x2040 in resolution. Exporting JPGs confirms that the images are only 2040 pixels in height. Converting the same RAW files in Photoshop results in images that are 2048 pixels in height.
    What happened to those 8 pixels? It is kind of a pain because the 3072x2040 files are now not exactly a 3:2 aspect ratio...

    yeah, I recognize that it's a very small "loss" of information, but it's just a little bit annoying because of the loss of the 3:2 aspect ratio. I just sent some of the 2040 images out for printing so hopefully there won't be an issue there.
    I noticed that the crop tool, when you tell it to use a 3:2 aspect ratio, will generate crops that aren't exactly 3:2 pixel-wise. Again, it's very close, but I just feel like there's no reason why it shouldn't be exact.
    Thanks for everyone's help! I guess I should start thinking about this as more of a "feature" than anything else...

  • After using Canon Digital Photo Professional Adobe Camera Raw cannot identify my Monitor again.

    Wenn eine RAW Bildbearbeitung mit Canon Digital Photo Professional stattgefunden hat, erkennt Camera Raw die Auflösung meines Bildschirms nicht mehr und produziert die Fehlermeldung, das die Auflösung des Bildschirmes zu niedrig wäre. Diese Fehlermeldung kommt dann auch bei bisher nicht aufgerufene und somit nicht bearbeitete .raw. Die gleichen Bilder als .jpeg werden in der richtigen Bildschirmauflösung angezeigt.
    Installiere ich Photoshop Elements 13 neu ist alles OK, bis zu dem Zeitpunkt wo ich Canon Digital Photo Professional das erste Mal wieder benutze. Nach der 1. Nutzung erkennt Camera Raw die Auflösung nicht mehr.
    Der Fehler ist seit dem letzten Update von Ramera Raw vorhanden und auch mit dem letzten Bugfix von Camera Raw nicht verschwunden.
    Hat jemand eine Lösung?

    Wenn eine RAW Bildbearbeitung mit Canon Digital Photo Professional stattgefunden hat, erkennt Camera Raw die Auflösung meines Bildschirms nicht mehr und produziert die Fehlermeldung, das die Auflösung des Bildschirmes zu niedrig wäre. Diese Fehlermeldung kommt dann auch bei bisher nicht aufgerufene und somit nicht bearbeitete .raw. Die gleichen Bilder als .jpeg werden in der richtigen Bildschirmauflösung angezeigt.
    Installiere ich Photoshop Elements 13 neu ist alles OK, bis zu dem Zeitpunkt wo ich Canon Digital Photo Professional das erste Mal wieder benutze. Nach der 1. Nutzung erkennt Camera Raw die Auflösung nicht mehr.
    Der Fehler ist seit dem letzten Update von Ramera Raw vorhanden und auch mit dem letzten Bugfix von Camera Raw nicht verschwunden.
    Hat jemand eine Lösung?

  • Photoshop Elements 6.0 locks up deleting pictures from my Canon Digital Rebel XSI

    I'm a long time user of Photoshop Elements and have never had one issue with it.  I just got a Canon Rebel XSi and when I connect it to my PC, PE offers to download the pictures.  That works fine.  The pictures come into PE.  Then it offers to delete the pictures from the camera and this is where the trouble begins. I click "Okay" to begin deleting and then the little dialogue box never goes away and the program just stays hung up.
    HELP!  What is wrong?  Why is this locking up?

    It's really not a good idea to let elements delete the photos in any case. Your camera has its own directory structure that the computer doesn't fully understand. It's preferable to just reformat your card in the camera or delete the photos directly in the camera, rather than letting a computer do it for you.

  • I have a Canon EOS 500D Camera the LCD has started to get black lines across it. Any ideas why?

    Solved!
    Go to Solution.

    Are they horizontal lines? And they don’t show up in the photos (once you export to a computer)?  It’s completely a guess, but I’d assume that the electrical contacts for those lines have become detached/corroded/broke.  So long as it doesn’t affect your final photo I’d say just live with it.  Fixing a camera that old isn’t worth it, so live with it or upgrade are your options. 
    If they do show up in the final photos then I’d guess that your sensor is damaged.  There are no settings that would do that, so something is damaged.  Again, with a camera that old it wouldn’t be financially sound to repair it, whatever it is.

  • I have downloaded a digital copy of a movie and when it was completed my itunes said the the couldn't find the file?

    the other day i got a movie and when i enterd the code it took it and downlaoded. however when it was done it had the exclamation mark beside it and it said that it coulndt find the file and told me to locate it . Now i also got the itunes extras and they work just fine. what should i do?

    Hi there,
    You may want to remove that file from iTunes and try re-downloading it from the iTunes Store. Take a look a the article below for more information.
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    http://support.apple.com/kb/HT2519
    -Griff W.

  • How can i change the last frame in a trailer i have converted.  everything else is fine but the wording is wrong on the final "credits" and don't know how to edit after converting it to a project.  Thanks to All.

    looking to edit the final frame which is the the "credits" section.  I have already  converted the trailer.  Is it too late to correct some nserts in the credits?
    Thanks to all.

    If by "converted" you mean that you've converted the trailer to a normal project using the menu option File>Convert to Project, then YES it is still possible to edit the Credits Title.
    In the converted project, double-click on the blue Title bar that sits above the background clip. In the Viewer, double-click on the text you wish to change (or highlight text by dragging over it). Now you can replace the highlighted text by typing in the new text. You can also change fonts and font colours.
    It's always good practice to duplicate the Trailer before converting it. To do this, while in Project Library view, click on the Trailer name in the Library then select File>Duplicate Project. A copy will appear in the Library with the same name as the Trailer, but with the number 1 appended. You can rename this copy as desired. Now, convert the duplicate to a standard project and continue with your editing as required. You now have the original Trailer in template form (which can be further edited), and can duplicate it again if required.
    John
    EDIT: Regarding my first sentence - just noticed that you did mention "converting it to a project" in you topic header. Sorry!
    Message was edited by: John Cogdell

Maybe you are looking for