I have a Canon EOS Rebel T3 1100D which will not turn on.

I have a Canon EOS Rebel T3 1100D which will not turn on. Battery charger shows green light , but when installed camera will not turn on. Place battery back into charger and it shows yellow light and takes awhile to charge and show green light. I thought must need new battery but it does same thing. This camera has been trouble free from start, it is a few years old but didn't think i would have internal issuses already. Am i missing something? Ordered ac adapter to plug in direct and see if it works then. Any ideas would be helpful Thank you.

Hi GP!
Welcome to the Canon Forum.
If the camera still does not power on after using a new battery or after you try an AC adapter, the camera will need repair. To start the repair process, you'll need to complete a Repair Request on our website.
Alternatively, you may participate in the Canon Loyalty Program. This option allows you to replace your current camera for a discounted fee. The original non-functioning camera would then be returned to Canon USA for recycling using a prepaid shipping label that would be provided. If you would like to take part in this option, please call our Sales Department at (800) OK CANON (800-652-2666) seven days a week, 8am to Midnight. Let them know you have been working with online technical support and the Canon Loyalty Program was offered. Be sure to have your serial number for your camera at the time of your call.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

My Canon MX892 suddenly powered off and will not turn back on.

My Canon MX892 suddenly powered off in the miccle of a print job and will not turn back on.

Reset, hold both home and power buttons until the iPhone begins to restart, usually about 10 seconds time. If still problem, connect iPhone to Wall Charger and Reset, this can take about 20 seconds of holding both buttons while on charger.

HT6208 hi i have an iphone 4s and my wifi setting will not turn on, can u help me pleas

hi i have an iphone 4s and my wifi setting is not turning on, please could u help

Hi jackharper1066,
If you are having issues with a WiFi setting on your iPhone that isn't responding or is greyed out, you may find the troubleshooting steps outlined in the following article helpful:
iOS: Wi-Fi settings grayed out or dim
http://support.apple.com/kb/ts1559
Regards,
- Brenden

Which Apple computer is best for video - Final Cut Pro X, Photoshop et. I have a 7 year old Mac Pro which will not accept FCP X.

I have an Apple Mac Pro. It is almost 7 years old and will not accept FCP X. I have been waiting for Apple to make a new Mac Pro, but I don't know when that will happen.
Any recommendations?

Do not put new money today into Mac Pro 2008 or previous. (the FBDIMM memory is too expensive).
Some say skip the 2009 model as the 2010 is better (has built-in support for hex processors) but not a lot more money.
Computers will always be better, faster, and cheaper if you wait. [A new Mac Pro may not be solid on day 1.] At some point, you have to get your work done, and just have to hold your nose and choose from what is avaiable and stable at the moment.

What are other ways i can locate my Serial number to my iphone? my iphone doesnt have it on the back and my iphone will not turn on

A few days ago my iphone stopped charging and now it wont turn on at all. Ive taken it into Verizon and they told me that the charging port is corroded. Ive looked at the back of my iphone and discovered my iphone serial number is not located on the back and i am unable to turn my iphone on. is there any other ways i can retrieve my serial number for my phone?

If you have access to your computer, but not your device
Open iTunes.
Open Preferences. (In Mac OS X, choose iTunes > Preferences. In Windows, choose Edit > Preferences.)
Click the Devices tab.
Position the mouse over a backup to display the serial number of the backed-up device. iPhone and cellular iPad models also display the IMEI/MEID and Cellular Data Number:
copied from iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

HT201412 Iphone 4s is frozen on the black apple logo screen. have tried to hard power off but it will not turn on. Have connected to computer but device it is not recognizing the device so can't do an itunes update. any suggestions?

My phone is frozen and I can not get it to "Wake up"
Stuck on the black apple logo screen. And my computer and itunes are not responding when I plug it in.
Any ideas?

try doing a restart / reset first
http://support.apple.com/kb/ht1430
if this doesn't work
You can try the step here in this link.
http://support.apple.com/kb/ht1808
when you're stuck on the apple logo, the operating iOS doesn't load so itunes could not detect the device

My iphone screen is black. I have tried. To reset it but it will not turn on. Please help!!!

My iPhone 5 was working perfectly fine earlier. All of of sudden the screen started having black lines then went black. I tried to reboot it pressing the home buttons. Now the phone won't turn on at all. Any and all help will be greatly appreciated!!!

See Here for > Frozen or unresponsive iPhone
Try this First... No Data will be Lost..
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
More Info here > https://discussions.apple.com/message/19521062

I have a iPod touch 3rd generation and it will not turn on or charge.

This iPod, when ever I turn it on all I get is the apple logo. Then about five minuts later, it tells me to plug it up, you know, the low battery simbole. But the kicker is that it is always pluged up when it is doing this! Can you tell me how to restor this iPod? I've tried force recovery but I discontinued it from my account. I've heard if you plug up to a computer it will charge better, didn't work. Thanks for helping me. Cameron44

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Canon EOS Rebel T3 Freezing or locking up.

Hi there, I have a canon eos rebel t3, I'm trying to figure out what is going on with this for a friend and trying to fix it. I had to fix a ribbon cable that her husband broke trying to fix a button that he thought was broken because the disp button wouldnt make the lcd come on. Heres pretty much is whats happening. I have tried new card, reformatted the cards. Sometimes it will work fine, but seems if you actually try to take alot of pictures in few secs it ends up freezing up, and the display doenst work or any of the buttons do anything, but you can hear beeps sometimes. But in the view finder the green writing is still visible on the buttom. It also will click to take picture but will not try to focus or autofocus. When it finally goes back to not acting up the focus works again and the buttons work. It seems like its locking up or has errored out trying to write to the memory. I don;t think it would be the lcd display because when it does work the lcd display has no problems. I have tried other memory cards with high read/write speeds. I tried to reformat them. Also when you plug the camera into the computer when is acting up the computer does not reconize it at all. Please give me some help on getting the problem down to one area of the camera so I can fix it for my friend that just doenst have the money to afford a new camera even with the trade in program Thanks for any help you can give me.

Hi kordris!
Thanks for posting.
At this point, the best suggestion we have would be to remove the battery from the camera for a few minutes when it freezes up, then put it back in the camera. If the camera's controls still freeze up and do not operate, the camera will need to be repaired. To start this process, you'll need to complete a Repair Request on our website.
This didn't answer your question? Find more help at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Canon EOS Rebel T3 camera

I have a Canon EOS Rebel T3 camera. I have misplaced my inside cover for the lense. is there any place I can purchase one. I am speaking of the screw on one that covers the inside lense after you remove the larger lense. its hard to explain in typing so I hope you can understand what I am speaking of. I inserted a photo of what part I mean. if you see where the hand it pointing, well there is a cap that screws on to protect the lense inside. I need this screw on cover.
I am praying that you can tell me where I can find one. I need this asap. I am going on holidays on dec 19th and need a cover for it. thank you
Solved!
Go to Solution.

http://www.amazon.com/Canon-RF-3-Body-Cap-Cameras/dp/B00007E7K1
John Hoffman
Conway, NH
1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

I have just brought a brand new Iphone 5 and it will not turn on or charge.

Have brought a brand new iphone and it will not turn on, charge, In fact won't do anything

Return it for another one, Apple gives you 14 days to return iphone

I bought a canon EOS Rebel T5i. It came with photoshop elements 11. PS won't open my C2 raw files and says my camera isn't supported by the software I have downloaded 7.4 dng converter and I still can't open the files. What do I need to do?

I bought a canon EOS Rebel T5i. It came with photoshop elements 11. PS won't open my C2 raw files and says my camera isn't supported by the software I have downloaded 7.4 dng converter and I still can't open the files. What do I need to do?

You need camera raw 8.4 for your camera, if it’s Digital Rebel T5 EOS 1200D EOS Kiss X70. It is not compatible with PSE11; so it’s a bit odd if that software was bundled with the camera except that it will work with jpegs. I suggest you download and install the free Adobe DNG converter to convert your CR2 files to the Adobe universal Raw format and the DNG files will editable in PSE11(keep your originals as backups and for use in the camera manufactures software)
Mac download (.dmg file) click here DNG Converter 8.4
You can convert a whole folder of raw images in one click. See this quick video tutorial:
You Tube click here for DNG Converter tutorial

I HAVE A CANON DIGITAL REBEL EOS 300D CAMERA. THE CF CARD WAS PUT IN THE CARD SLOT WRONG &DAMANAGED

I HAVE A CANON DIGITAL REBEL EOS 300D CAMERA. THE CF CARD WAS PUT IN THE CARD SLOT INCORRECTLY AND THE CARD SLOT WAS DAMANAGED. CAN THIS BE REPAIRED. AND HOW MUCH.

Hi Ronald,
I'm sorry to hear that the pins in the memory card compartment of your Digital Rebel have been bent.
Because the service life for this camera has expired, Canon no longer offers service for it. I'm sorry for the difficulty this causes.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

HELP!!! I do the yearbook for my elementary school. I took a lot of pictures on my Canon EOS rebel

HELP!! I do the yearbook for my elementary school. I took a lot of photos on my Canon EOS rebel t3i and was transferring them to my computer when I get impatient. I pulled the disc out of the computer while it was still trying to read it. Then I put it back in the computer to try to start over. When that didn't work I put the disc into the camera to see if I could read them there. The photos did not show in the camera so making things even worse I took a picture to see if it was working at all. I was able to take a picture but it said that only 1 picture was on the disc. Then I put the disc back into the computer and it came up showing the icons for the original photos but kept spinning and spinning and didn't do anything. Now it won't even do that much but what happens now is I get the DCIM folder like normal, then the 100CANON folder and then a folder that says ╟/ 0A1.u when i try to open that folder it says, "The filename, directory name, or volume label syntax is incorrect." Is there any hope for getting the pictures back or making this disc useable again? Thank you for your time and your help! I feel like saying, "Help me o b canon experts you're my only hope!"

Well, first may I say I think it is appalling that an elementary school would ask a kid between the ages of 6 and 11 like yourself to shoulder such a responsibility. Budget cuts are what they are, but kids should not be expected to pick up the slack. You have done remarkably well under these shocking circumstances. And you write way beyond your age group, which is a credit to yourself and your teachers.
You should tell your parents to contact their state congressman and demand that they increase funding for schools, or else drop the yearbook program.
Scott
Canon 6D, Canon T3i, EF 70-200mm L f/2.8 IS mk2; EF 24-105 f/4 L; EF-S 17-55mm f/2.8 IS; EF 85mm f/1.8; Sigma 35mm f/1.4 "Art"; EF 1.4x extender mk. 3; 3x Phottix Mitros+ speedlites
Why do so many people say "fer-tographer"? Do they take "fertographs"?

After loading Lion I cannot open some pictures. I get Unsupported Image Format. It tells me picture was taken with Canon EOS Rebel with unknown lens

After loading Lion I cannot open open some pictures in Aperture. I get Unsupported Image Format, all files even the ones I can open are .JPG. Also it tells me picture was made using Canon EOS Rebel with unknown lens.

You mention that 'most' of your files are DNG. Try
running the effected files through Adobe DNG
converter again and then import your reprocessed
files to Aperture and see if the problem persists.
I had a problem with a batch of D2x files converted
to DNG which had been metadata tagged by
PhotoMechanic (the evil app).
B.T.W. You mention that you had been using Bridge.
Are you getting any of the embedded XMP metadata
coming into Aperture during the import process?
Already tried that multiple times...no luck. I'm wondering though if it might be related to metadata as you suggest. I'm still trying different things to see what happens.
I was able to alleviate the problem on one set of images by painstakingly searching my external drive for the oldest backups I could find - CR2 files from before DNG conversion. I then ran those through DNG Converter and tried importing them again (this time, I embedded NO thumbnail, but I'm not sure if that made the difference - I think it was more likely a fluke in the original conversion that caused the problem). This time, it worked.
Now, the big problem is that I still have a couple hundred images for which I can't seem to locate the original CR2 files. I don't typically keep them after conversion, as I don't have the space for both.

I have a Canon EOS Rebel T3 1100D which will not turn on.

Similar Messages

Maybe you are looking for