I have a Canon ImageClass MF6540 Laser printer. Need to download print driver Need link

My computer crashed. I need to reinstall laster printer Canon Image Class MF6540. Do not have original installation disk; cannot find link on internet. Just want to get this printer to print. Do not need full software. Can someone provide me with a link to a print driver that will allow this printer to function. I have been looking all over the web, even downloaded what apeared to be a driver, but not working. Just need simple link. thanks
Solved!
Go to Solution.

Hi,
Did you find this page already?
http://www.usa.canon.com/cusa/support/consumer/copiers_fax/multifunction_copiers/imageclass_mf6540?s...

Similar Messages

HT4507 How do I connect my Canon ImageClass 4000 BW printer on Lion?

Hello every one,
I have a Canon ImageClass 4000 printer which was working fine with my OS 10.6, but since I installed Lion, I can not print. I would really appreciate if you could help me with this. Thanking you in advance.

Sorry for my confusing reply. I had never heard of the imageCLASS 4000 so that's why I thought it was an MF4000 series. Seems like it was only sold in the USA and quite a number of years ago.
So I checked the Canon USA web site and saw the hqx package you refer to containing the old Adobe PS driver for OS8. I also saw an old version of a PCL and PS driver for Windows.
So working on the assumption that the device does support Postscript you should be able to create a printer queue using the Generic PS driver included with Lion. If this doesn't print or simply prints rubbish then change the printer queue via Options & Supplies > Driver to use the Generic PCL Laser driver.

I have a Canon Pixma MP500 scanner printer, is there a driver that can be loaded that is compatible with OSX v10.9.4?

I have a Canon Pixma MP500 scanner printer, is there a driver that can be loaded that is compatible with OSX v10.9.4?

Thanks, PAHU, for providing the Australian site for the Canon driver. I have an MP500 and it still seemed to print fine after I downloaded Yosemite. However, as others have reported, the MP Navigator no longer performed normally in scanning. The "Save As" keys didn't align and therefore didn't work but one could still scan using an alternative method ("Scan with scanner driver" button).
In any case, my hard drive subsequently failed on this 2010 27" iMac and when it was replaced the tech installed Yosemite 10.10.1. Just tried printing this evening and it wouldn't. Advised I needed undefined "software." Got various error messages. Went to Google and read this and downloaded that to no avail. Tried the Gutenprint driver but it too didn't work. Latest error was "stopping job because the scheduler could not execute a filter." Had no clue what that meant! System info listing for the printer (under About this Mac, System Info) lacked any reference to permissions or a printer utility version (but I didn't notice or know significance of omissions). Finally I downloaded from the Australian site, just the print driver 10.51.2. The printer then printed!!! (The MP Navigator scanner remains flawed but works by clicking "Scan with scanner driver" rather than the normal way.) I'm holding my breath that things will continue to work.
Thanks again, PAHU, for your help, and Greg and Pam and Andy too!

HT1338 I have a canon pixma ip4300 ij printer connected to my mac G5 with an intel processor, i cannot print cd labels since i changed from the old mac OSX processor.

I have a canon pixma ip4300 ij printer with software to print cd/dvd labels ,i origonaly had it connected to a mac with the old MAC OSX processor,since i have changed to a mac with MOUNTAIN LION the new intel processor i cannot print the cd labels, i have downloaded software update for the printer but it still reverts back to the old software , can anyone help thank you Allan R

So do you have any problems using the iP4300 to print from other applications on 10.8? Just trying to get an idea of your current setup.
I ask because Easy PhotoPrint (EPP) will use your existing printer - there is no need to create a new printer. So when you open the software and select to make a Disc Label, when you get to Step 4 - Print Settings, the software looks at your existing printer setup to check that you have a printer that will support CD/DVD printing (not all models of Canon inkjet support this).
So with regards to the problem connecting to the iP4300, is the software failing to locate a supporting printer? Can you give me a bit more info as to what is happening when you attempt to print a CD/DVD from EPP?

MacBook Air Canon Pixma ip 5000 printer driver

I have a MacBook Air and I cannot find a printer driver for the Canon Pixma ip 5000 printer driver. Please...Please help me.

Get it from Canon or see if it is listed here:
Printer and Scanner software available for download:
http://support.apple.com/kb/HT3669?viewlocale=en_US

Cannon laser printer driver lbp2900

hi
I want cannon laser printer driver for lbp2900

Contact Canon, each printer manufacturer makes their own drive. Also try using Apple's instructions to see if one is already available, look in Mac Basics: Printing in OS X Mavericks

I have a Canon Rebel T3i and I need to tether into my Macbook Pro. How can I do that?

I have a Canon Rebel T3i and I need to tether into my Macbook Pro. How can I do that? I updated my iPhoto to recongize my camera, it does. When connected I see it in the USB utlitiy. But my MacBook Pro says "no camera found." What do I need to do to fix this problem?

Thanks, Kappy
I was fooling around with Lightroom and it has a tethering option. I tried it and it worked. But I am still reading my camera manual as you recommeded.
Thnaks,
JR

I have a canon D70 camera and I can't download my raw files to elements 11 or lightroom 4

I have a canon D70 camera and I can't download my raw files to elements 11 or lightroom 4

If you don't use the DNG Converter to create DNGs from your raw files, then you'll need to purchase LR 5 to us LR with your camera that is newer than LR4; however, there is something you can do for PSE11:
ACR 8.3 will work with PSE11 to open 70D files, but there is no installer, so you have to be a little devious to get things to all work. You also need to be on a Windows 7 or 8 since ACR 8.3 supposedly doesn't work on Vista. I should also say that the process outlined below does work on my Windows 7 64-bit computer, but I also have PS-CS6 and PS-CC installed on it, so it is possible that ACR 8.3 is dependent on something that wouldn't exist on a computer with only PSE installed on it, but someone else will have to confirm that.
I was able to get 70D files to open in ACR 8.3 on PSE11 by doing the following:
Download the ACR 8.3 for Windows update for PS-CC via the direct download link on the Adobe Blog:
http://blogs.adobe.com/crawlspace/2011/03/keeping-photoshop-up-to-date.html#notconnected
Unzip this downloaded setup.zip to a folder somewhere.
Inside the files from that zip is a folder called payloads \ AdobeCameraRaw8.0All-031213015928. Note that this is the folder without x64 in the path. PSE11 is a 32-bit program so we need the 32-bit version of the plug-in.
Inside that folder is another ZIP called Assets1_1.zip so unzip it somewhere.
Inside Assets1_1.zip there is a file called 1003. This is the largest file in that zip and is the plug-in you need.
Copy this 1003 file into the existing PSE11 camera raw plug-in folder:
C:\Program Files (x86)\Common Files\Adobe\Plug-Ins\Elements 11\File Formats or for a 32-bit Windows OS, into: C:\Program Files\Common Files\Adobe\Plug-Ins\Elements 11\File Formats
Rename the existing Camera Raw.8bi to Camera Raw.8bi_7 (in case something doesn't work and you need to rename it back, later).
Rename 1003 to Camera Raw.8bi
After these steps you have the ACR 8.3 plug-in installed in PSE11 but not the camera and lens profiles, so install those by downloading and installing the DNG Converter 8.3:
http://www.adobe.com/support/downloads/product.jsp?product=106&platform=Windows

I have a canon vixia hf m41 camcorder; can i download my videos into i movie? thanks.

I have a canon vixia hf m41 camcorder; can i download my videos into i movie? thanks.

Have you tried iMovie or using the software that came with the camera?

I have a canon MG5320 and cannot print in grayscale. How do I turn the off setting to on?

I have a Canon Mg5320 printer and cannot print in grayscale. I found the setting, however it is on the off position. How do I turn it to on?

You should be able to tick the box next to the text as shown below.

How to print from IPad. I have a Canon MX430 airless (wireless) printer

How to print from IPad. I have a Canon MX430 airless (wireless) printer

That printer does not support airprint. See http://support.apple.com/kb/ht4356 for lists of Airprint capable printers.
You will have to print with one of the many print apps. Canon has some in the App Store.
There are many other print apps as well:
PrintCentral
Print n Share
etc.
Check the App Store.

TI Laser Printer Driver

I have a Texas Instrument microLaser Plus printer that used to work with an 8600 Mac.
Can it work with my Desktop or Powerbook G4 using OS X.
The printer has three ports:
Mini Din-8
25 pin connector
36 pin connector

Mini Din-8 is either old PC Serial, or AppleTalk.
If it worked with your old Mac, can we assume that it used this port, from the Mac, and so that it is Appletalk, or Ethertalk as some called it.
Only question now is, does OSX 10.4 still support AppleTalk ?
Otherwise you need some sort of Ethernet to AppleTalk converter. Farallon used to make these. I still have mine. They were enormous sellers at the time of the first iMac in 1998, when it arrived with no AppleTalk port, and people still wanted to print on their old StyleWriters (like me). USB printers hadn't been invented then. This sounds exactly like what you trying to achieve.
Google and eBay are your friends, but I'm still concerned about OSX 10.4's support for AppleTalk.
I still use mine to establish a network with my SE.

Canon MF4207 MultiFunction Laser Printer won't work with TCP/IP

Bought this printer. Very cool. Great quality. Fast...
But, we can't even get a "ping" via TCP/IP. We're about to take it back. Looking at other threads, do Canon's not work with Mac's on networks (even though their documentation says they do)?
Anyone with ideas?
Running both from a ether wired imac and a wireless powerbook. All on 10.4.?.
Thanks
Doug

First of all, Canon's designed for network printing do work. Most of the posts you have probably seen are for printers that haven't been designed for network printing, yet the users are still trying to configure them this way???
Looking at the manual, there a couple of things you need to do to print across a network.
As Kappy suggested, the first thing you need to do is configure the IP address of the MF4270. By default, the machine is set to DHCP, but if you don't have something on your network allocating addresses, then it will be set to all zero's.
Now you mention it won't ping, so we could make the assumption that you have set an appropriate IP address for your network and the machine is not responding. To be sure that you do have this set to the same subnet as your Mac network, print a User Data List.
Additional Functions > 11. Report Settings > OK > 2. List Print > 9. User Data List > OK
This will show you the IP address and subnet mask. It will also show you if LPD and RAW (Port 9100) print services have been enabled.
If you do not have an appropriate IP address set, then you need to press Additional Functions and scroll to 12. System Settings.
Press OK and scroll to 2. Network Settings then press OK.
This will show TCP/IP Settings. Press OK.
Scroll to 1. IP Address Auto and press OK. It will show ON. Scroll so it shows OFF and then press OK.
Now scroll to 2. IP Address and press OK. This will show the current address. Using the numeric keypad enter the desired IP address for the printer. Press OK to complete.
Now scroll to 3. Subnet Mask and input the appropriate subnet mask and press OK.
Now you can press the Stop/Reset key to exit and maybe print another User Data list to ensure the settings you entered are correct.
Now that you have the IP address set, you need to install the Canon UFR2 v1.60 driver for Mac OS X. If this version didn't come with the machine you can download it from the Canon web site.
Once you have run this driver installer you are ready to add the printer. Open the Printer Setup Utility and select Add. Select More Printers. Now select 'Canon IP (UFR II)'. This will show a pane allowing you to enter the IP address of the printer. It also wants a queue name. Enter LP for the queue name. Click Add and wait as the driver software will now query the printer and auto select the appropriate ppd. Once this is complete the MF4270 will appear in the Printer List.

I have a canon mg2100 and my printing alignment is squiggly.

I have performed every maintenance test and it is still printing squiggly. I don't know what else to do. HELP

Hi kimisme,
If you have performed both an automatic and manual print head alignment, as well as at least one cleaning and two deep cleanings on the printer and the alignment is still incorrect, the printer will require servicing. Please Contact Us for your servicing options.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

I have a canon scanner MP560 wireless. Needed to create new wireless network and now my computer can't find the scanner/fax..

My iMac doesnt' see my Canon MP560 wi fi scanner ever since I created a wireless network in my house. Can't find a way to change whatever settings i need to to connect the scanner. help.

Well let's see if we can help you get set up. Have you got any 2.4 GHz cordless phones in the house and if so try unplugging them and do a hard reset of the express.
1. unplug the express
2. press the reset button
3. while pressing the reset button plug in the base station
4. keep holding the rest button till you see 4 green lights flash
you may have to hold it for 30 seconds or so
if this doesn't work try plugging the express in right beside the computer and then going through the airport setup assistant
Good luck
Let me know
iMac G5 iSight 17" Mac OS X (10.4.4)

I have a Canon ImageClass MF6540 Laser printer. Need to download print driver Need link

Similar Messages

Maybe you are looking for