I have a Canon LBP5360 laser printer connected via USB cable to my MacPro running 10.6.8 I have downloaded the latest UFR2 divers. I am trying to connect to the printer but the printer is not showing appearing in Print
I have a Canon LBP5360 laser printer connected via USB cable to my MacPro running 10.6.8
I have downloaded the latest UFR II driver. (UK Version)
I am trying to connect to the printer but the printer is not appearing in my Print/Fax Preferences.
When I click the box "More Printers" under the Default printer the drop down box gives me a heading "Canon IPv6 (UFRII) with the option to add or cancel. (The add is highlighted). But there are no printers showing in the box. Nothing. Can anyone help?
Is there a problem with my Mac setup or maybe a setting in my printer?
Mac UFR II Printmonitor
UFR II Printmonitor is application software that interfaces with the software for the printer, and is installed with the printer driver. You can start UFR II Printmonitor in the following folder to check the printer status, and errors. Refer to the Help how to use the Print Monitor.
MF3010, MF8000 Series, MF8000C Series, MF8300 Series, MF8300C Series:
Print Monitor: [Library] - [Printers] - [Canon] - [CUPSCMFP] - [Utilities]
Other Printers:
Print Monitor: [Library] - [Printers] - [Canon] - [UFR2] - [Utilities]
Similar Messages
-
iphone 4s not getting detected in macbook after connecting via usb cable, also photos taken in iPhone not showing in macbook pro
Thanks. I realises that i will hv to go to iphoto to see the photo. Its now working !!!!!
-
When I start iTunes, how do I get rid of the message "To use this machine for downloads, enter you Apple ID and password" which I now see twice since I downloaded the latest version of iTunes. Once is enough and no checkbox exists to say "do not show this message....."
Does this apply?
If you're asked for the password to your previous Apple ID when signing out of iCloud - Apple Support -
Cant click on Sync apps. all the page is grey. I tried restrictions apps on and off but the same.
Cant click on Sync apps. all the page is grey. I tried restrictions apps on and off but the same.
Have you reset the iPad by holding down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears on the screen? If that doesn't resolve this, you can try resetting all settings. Settings>General>Reset>Reset All Settings. You will not lose any data, but all device settings will have to be entered again.
If that doesn't fix it, your next step might be to backup then erase all content and settings or restore the iPad to factory settings. See how if goes if you reset all settings first. -
E65 won't connect via USB Cable
Hello to you all...
I just got my new Nokia E65 and I couldn't be happier with it. Fantastic phone.
However I can't connect it to my PC (Windows XP SP2) via the USB Cable...it just won't recognize it. I installed PC Suite with the latest cable drivers and nothing happens. When I connect the cable to the phone it asks if I want to use "data transfer" or "pc Suite" mode, but neither of them work.
I'm able to connect to PC Suite via infrared, and that works fine. But I want to update my firmware and software updater only works via usb cable.
Any ideas on what to to?more info needed, suite version, cable type, what is visible in pc device manager when you connect phone, what is visible in phone screen when you connct cable, etc.
-
Hi. i am trying to connect a panasonic kx-mb2061 printer via a usb cable to my imac. I got as far as printer browser, but can not find panasonic. where is it?
Mac UFR II Printmonitor
UFR II Printmonitor is application software that interfaces with the software for the printer, and is installed with the printer driver. You can start UFR II Printmonitor in the following folder to check the printer status, and errors. Refer to the Help how to use the Print Monitor.
MF3010, MF8000 Series, MF8000C Series, MF8300 Series, MF8300C Series:
Print Monitor: [Library] - [Printers] - [Canon] - [CUPSCMFP] - [Utilities]
Other Printers:
Print Monitor: [Library] - [Printers] - [Canon] - [UFR2] - [Utilities] -
Does the MX892 connect via USB cable
Even though this is a wireless printer, can I just leave the usb cable attached and by pass setting up a wireless system?
Solved!
Go to Solution.Hi Zenjoo, thanks for posting! The PIXMA MX892 can be plugged into the computer via a standard USB printer cable, as well as be connected wirelessly. Please note that the printer does not come with a USB cable, you will be required to use the cable off your old printer, or supply your own. We hope this helps!
-
I have set up another user screen on my PC (MS Windows 7) & downloaded iTunes and then downloaded the latest software version. The sync has taken over an hour so far, is this normal? It is my niece's iPod and she has her music library on her laptop but has not downloaded the latest software - does this cause a clash if the iPod is registered to a different PC? Any help or guidance in an idiots simple way would be most appreciated. JT
It is the update firmware is taking so long? It can take an hour or more for the download.
If you do the update on other than the syncing computer, all the music and apps will not be on the iPod after the update see:
iOS 5: Updating your device to iOS 5 -
can anybody help me out?
gatorj1997 wrote:
Can I set up a cloud account and then upload all of my music from the nano?
No. An iPod Nano has no internet access.
Recover your iTunes library from your iPod or iOS device
Syncing to a "New" Computer or replacing a "crashed" Hard Drive -
My pc is not recognising my iphone when i connect via usb cable
My iphone is not being recognised when I connect to itunes on my pc anymore. Can anyone help please?
Hi carolderek wilson2014,
Welcome to the Apple Support Communities!
If iTunes is not recognizing your iPhone on your Windows computer, please follow the troubleshooting steps in the attached article.
iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support
Have a great day,
Joe -
Can somebody please help me to create an iTunes account. I have the new iPad and I livein Jamaica, I don't know if my location is interfering with my access. Can somebody help?
idk what happened but now it's fine lol sorry
-
my iphone fell on the floor and the power botton wont work and also the screen went black i already tried to reset it throun itunes but the phone did not connect and i dont know what to do
You can take it to Apple and get replaced as long as you pay for the replacement.
Allan -
When iPhone 5s is connected via USB no audio is heard
Hi There -
I've seen older threads on this issue but I don't think I've really come across any solutions. My issue started yesterday; now before reading further I have to ask that you please keep in mind that I did perform the latest upgrade on my iPhone a bit earlier in the day.
When I connect my iPhone to my vehicle sync system and announce that I'd like to connect via USB, the voice recognition repeats my request and then the music on my iPhone shows to be playing on the display in my vehicle. The problem is that though the music appears to be playing and the minutes played are being displayed there is no audio coming through. When I switch to the Bluetooth Audio option all sound comes through.
Now, as a 2nd test, we connected my sons iPhone 5s via USB (he has not taken the latest update on his iPhone) and the same issue happens with his. Voice recognition changes to the USB format as requested, music appears to be playing but no audio is heard. When we change his phone to Bluetooth Audio the audio comes through nice and clear.
I'm not entirely convinced the update caused the issue so I wanted to put this out there to see if anyone has run into this and were able to actually resolve the issue.
I know the USB cable is working fine because when I do plug it into either phone the phone makes the little connection sound and pops up a brief battery percentage box. I also know the cable is working because when we announce USB as our audio of choice the system recognize USB via the iPhone.
One other thing I tried looking for was the option on the phone to switch from Docked to Synch - I know on my iPhone 4 I was able to switch back and forth through iTunes and would also have the option if I tried to watch anything via You Tube when connected to the dock; I cannot find this anywhere on the 5s when connected via USB.
Help is greatly appreciated!!!I have had similar troubles with wifi.. some improvement removing BlackBerry desktop software & drivers & reinstalling after reboot... I used the same installer I had previously, but a fresh downloaded installer couldn't hurt...
10.3.1 SW .1779 OS .2726 WLAN .1.1 Radio .2727 -
I have a canon printer mf5940dn, it is connected via USB to my macbook air, and yet, when I want to print smth, it says the printer is not connected. does anyone has any idea why? is there a guide to do it properly?
Hi,
I am currently replying to this as it shows in the iChat Community.
I have asked the Hosts to move it to Snow Leopard (you should not lose contact with it through any email links you get)
I also don't do Wirelss printing so I can't actaully help either.
10:01 PM Friday; July 29, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb( 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
A printer that I have connected to my iMac via usb in not showing up in printer options on my iPhone or iPad and it use to before I upgraded to 8.1. How can I fix this?
Is it an Airprint-compatible printer, and is its WiFi enabled if it is? (see: About AirPrint)
If it isn't an Airprint supported printer, then you need a 3rd party driver on your iMac to print from an iPhone. Such as Printopia. As it worked in the past you probably have such a printer driver installed; check and see if it's running.
Beyond that try restarting the printer, restarting the phone, restarting your router, and restarting your computer.
Maybe you are looking for
-
How to install Adobe Premiere 6.0 on Windows Vista
I purchased Adobe Prmiere 6.0 11 years ago and installed it on my computer which was running Windows Millenium at the time I now wish to install and run this program ( Adobe Premiere 6.0 ) on my Window Vista. I have the serial number When I try and
-
Final Cut Pro 6 on Mac OS Snow Leopard installation problem HELP!!!
After 2 - 3 hours of installing all 10 FCS 2.0 discs and Software Updates, I can't seem to launch Final Cut Pro 6.0.6. I get *"...software maybe damaged or not installed.."* So I removed all of them and only custom-installed Final Cut Pro 6.0.6. It w
-
Purchased Music NOT transferring from ITunes to IPod
AArgh. I have an older version of IPod (non-clickwheel) with the latest vesion of IPod Software (2.2) installed AND ITunes 6.0 AND I've repaired permissions, restarted, all the common troubleshooting actions taken place. My Purchased from ITunes musi
-
Take out initial screen of Factsheet
Hi experts, Is there a way we can take out the initial screen of the factsheet which asks you for the user and password. We don't need it, and it is annoying for the user, each time he enter the Factsheet in the IC Win Client. Best Regards, TPT
-
it,s a 2.16 GHz Intel Core Duo memory 2 GB 533 MHz DDR2 SDRAM is there some kind of way i can upgrade that to a Intel Core Duo 2 processor or is it just a batle i cant win ?