I have a canon mg2100 and my printing alignment is squiggly.

I have performed every maintenance test and it is still printing squiggly.  I don't know what else to do.  HELP

Hi kimisme,
If you have performed both an automatic and manual print head alignment, as well as at least one cleaning and two deep cleanings on the printer and the alignment is still incorrect, the printer will require servicing.  Please Contact Us for your servicing options.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

  • I have a canon MG5320 and cannot print in grayscale. How do I turn the off setting to on?

    I have a Canon Mg5320 printer and cannot print in grayscale. I found the setting, however it is on the off position. How do I turn it to on?

    You should be able to tick the box next to the text as shown below.

  • I have a canon mg2100 series printer. I print shipping labels with black ink. I ran out and changed

    I have a canon mg2100 series printer. I print shipping labels and use black ink. I ran out and changed the cartridge, now the text is faded looking and I can't read major parts of the label. I did the cleaning print head under control panel and it did fine, but when I try to print again it's still faded. Help!

    Hi ttsheppard,
    It is recommended that you contact live technical support . There is NO charge for this call. Real time feedback of a live technical support call would be very beneficial in this case.
    Please dial 1-866-261-9362, Monday - Friday 10:00 a.m. - 10:00 p.m. ET (excluding holidays). A Canon technical support representative will be able to resolve this issue faster.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • HT3771 how can i get my canon mg2100 to only print in grayscale/black i have an mac os x10.6.8

    I have a canon mg2100 i want to have it print in only grayscale for somethings. However, there is no place I can find to select this option.
    It is connected to my mac desktop with an os x 10.6.8 operating system. How can I fix this?

    The only way I know is to have yor doc  ready to print, command P, then when the printer window comes up, select >presets>fast plane paper black and white.   Hope this helps.

  • I have a Canon MG3520 and it keeps saying it's OFFLINE and it won't let me Print from my MACBOOK Air

    Hello, I have a Canon MG3520 and it keeps saying it's OFFLINE and it won't let me Print from my MACBOOK Air.  I purchased this printer in late Dec 2013 and it HAS worked before & continues to "make noise" when it is turned on.  This is Very Frustrating and Inconvient since I have a Business from my home.  Please Help asap! Thank you,  Tracey

    traceyss--this might work on mac air:  on google cloud print i went to the cloud site http://w.x.y.z(put in your numbers) and then menu-utilities-energy saving settings, where i turned off "auto off" (clicking on it leads you to this choice) and turned on "auto on."  then i turned off printer and restarted in 5 seconds to get the changes into the mg3520's little brain:  so far, so good(on a chromebook). hope this works for you!--ceaisland55

  • Have a Canon MX860 and the magenta will not print after several deep cleanings

    Have a Canon MX860 and the magenta will not print after several deep cleanings

    Hello allenaeifert.
    Unfortunately, if the issue persists after deep cleanings have been performed, we would have to advise that you contact our support group at 1-800-OKCANON for additional assistance with this issue.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • I have a Canon MP640 and I am trying to connect my Macbook Air to the wi-fi how do I do this?

    I have a Canon MP640 and I am trying to connect my Macbook Air to the wi-fi how do I do this?  I have been able to connect through the USB no problems.

    What version of mac are you running? Have you downloaded any of the drivers/software off the website yet? If not, you will need to download and install the CUPS Printer Driver and the Canon IJ Network tool.
    http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_series/pixma_mp640#DriversAndSoftware
    Then, you will want to open and use the Network Tool to set up the network connection
    http://kbsupport.cusa.canon.com/system/selfservice.controller?CONFIGURATION=1011&PARTITION_ID=1&secureFlag=false&TIMEZONE_OFFSET=&CMD=VIEW_ARTICLE&ARTICLE_ID=69015
    Hope this helps!

  • I have a canon mg5350 and its got error u052

    I have a canon mg5350 and its got error u052 how do I reset the printer

    Hi DrJeff,
    The ink cartridges are over on the right side due to the error the printer is experiencing; since you are receiving a message to contact the service center, we ask that you please call or email us at one of the methods on the Contact Us page for further assistance.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • I have a Canon Pixma MP500 scanner printer, is there a driver that can be loaded that is compatible with OSX v10.9.4?

    I have a Canon Pixma MP500 scanner printer, is there a driver that can be loaded that is compatible with OSX v10.9.4?

    Thanks, PAHU, for providing the Australian site for the Canon driver.  I have an MP500 and it still seemed to print fine after I downloaded Yosemite.  However, as others have reported, the MP Navigator no longer performed normally in scanning. The "Save As" keys didn't align and therefore didn't work but one could still scan using an alternative method ("Scan with scanner driver" button).
    In any case, my hard drive subsequently failed on this 2010 27" iMac and when it was replaced the tech installed Yosemite 10.10.1.  Just tried printing this evening and it wouldn't.  Advised I needed undefined "software." Got various error messages.  Went to Google and read this and downloaded that to no avail.  Tried the Gutenprint driver but it too didn't work. Latest error was "stopping job because the scheduler could not execute a filter."  Had no clue what that meant!  System info listing for the printer (under About this Mac, System Info) lacked any reference to permissions or a printer utility version (but I didn't notice or know significance of omissions).  Finally I downloaded from the Australian site, just the print driver 10.51.2.  The printer then printed!!!  (The MP Navigator scanner remains flawed but works by clicking "Scan with scanner driver" rather than the normal way.)  I'm holding my breath that things will continue to work.
    Thanks again, PAHU, for your help, and Greg and Pam and Andy too!

  • HT1338 I have a canon pixma ip4300 ij printer connected to my mac G5 with an intel processor, i cannot print cd labels since i changed from the old mac OSX  processor.

    I have a canon pixma ip4300 ij printer with software to print cd/dvd labels ,i origonaly had it connected to a mac with the old MAC  OSX processor,since i have changed to a mac with MOUNTAIN LION the new intel processor i cannot print the cd labels, i have downloaded software update for the printer but it still reverts back to the old software , can anyone help  thank you   Allan R

    So do you have any problems using the iP4300 to print from other applications on 10.8? Just trying to get an idea of your current setup.
    I ask because Easy PhotoPrint (EPP) will use your existing printer - there is no need to create a new printer. So when you open the software and select to make a Disc Label, when you get to Step 4 -  Print Settings, the software looks at your existing printer setup to check that you have a printer that will support CD/DVD printing (not all models of Canon inkjet support this).
    So with regards to the problem connecting to the iP4300, is the software failing to locate a supporting printer? Can you give me a bit more info as to what is happening when you attempt to print a CD/DVD from EPP?

  • I have a canon hf10 and need to be able to transfer my video from my camera to my computer so I can burn them to dvd is there a step by step process? i'm new 2 the mac world.  I tried downloading imovie 7.1.2 but it said, "An eligible iMovie application

    i have a canon hf10 and need to be able to transfer my video from my camera to my computer so I can burn them to dvd is there a step by step process? i'm new 2 the mac world.  I tried downloading imovie 7.1.2 but it said, "An eligible iMovie application was not found in the location /Applications." can anyone give me step by step instructions? i would hate to call the geek squad!!!LOL

    and what's a firewire port? how do i know if i have one?

  • I have a canon 70d and just purchased elements 12. It will not open a raw file for me. I have been advised to download the latest version of camera raw, i have done this and it still says my camera is not supported. I really need to open my raw files. Can

    i have a canon 70d and just purchased elements 12. It will not open a raw file for me. I have been advised to download the latest version of camera raw, i have done this and it still says my camera is not supported. I really need to open my raw files. Can anybody help me.

    You'll need to update to at least ACR 8.2 for the 70D to be recognized.  The normal way to update PSE12 to the latest CR is to use Help / Updates in the Editor which should update to ACR 8.5.
    According to Adobe's website PSE12 shipped with ACR 8.1 and you say it says yours is reported as ACR 8.0.
    Are you using PSE 11 and not 12?  PSE 11's maximum ACR version is 8.0.

  • I have Adope Reader XI and cannot print.  How do I print?

    I have Adobe Reader XI and cannot print.  How do I print?

    Ctrl+P usually does the trick... If it's not working for you you'll need to explain what exactly goes wrong. We're not mind-readers and can't help you without more detailed information about your set-up and the nature of the problem.

  • We have a Canon SX40Hs and cannot activate the digital zoom function. can you help?Thanks

    We have a Canon SX40Hs and cannot activate the digital zoom function.  I have tried changing the mode from Auto to "P" to "Tv" etc and the dig zoom function is greyed out and not accessible.  Any help?
    Thanks

    Actually, this is a friend's camera, but yes, I went to the menu and when I got to the digital zoom option, it is greyed out (not accessible).  That is the problem.  I shoot in the EOS line so figured maybe there was a custom function somewhere that was causing the problem, but Power shot line apparentley doesn't have custom functions.  Thought maybe digital zoom is only availabel in certain modes (pernaps not available in "green square"), but changing mode didn't seem to make it accessible either.  I am just not familiar with the powershot cameras so ...  any other suggestions?

  • I have a canon 60D and I'm trying to view images on the Ipad using the sd reader but no luck. Any help or ideas?

    I have a Canon 60D and I am unable to view or transfer photos to the Ipad using the SD Card reader. I have been able to view images with a Canon T3i. Are there certain settings I need to set on the 60d or should it work automatically? anythoughts or ideas? thanks

    Are the photo's you're trying to view/download in Raw?  I've had difficulty downloading Raw files, but have had no issues downloading JPEG files. Also, check a setting in your Canon, called communication.  From what I've read (I'm a Nikon D5100 guy myself), communication needs to be set to PTP, not normal.  I'm not sure how that will help if the pictures are already encoded?
    Well scratch what I've written.  I just googled the 60D and supposedly, JPEG and Raw are supposed to transfer through the SD card reader easily.  So, I'm clueless.  Sorry.......
    Message was edited by: rbrylawski

Maybe you are looking for