I have a canon MG4120 and today we are seeing the printer error contact service center.
I notice that the ink cartridges are over to the far right and not moving. Perhaps that is why there is a message. Nothing has been changed recently. What to do?
Hi DrJeff,
The ink cartridges are over on the right side due to the error the printer is experiencing; since you are receiving a message to contact the service center, we ask that you please call or email us at one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
Similar Messages
-
HELLO EVERYONE! I have a canon xl1 and cant seem to import the video to FCPX. HELP IS APPRECIATED!
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 3 GB
Bus Speed: 800 MHz
Boot ROM Version: IM71.007A.B03
SMC Version (system): 1.20f4
Serial Number (system): W88034J5X86
Hardware UUID: 00000000-0000-1000-8000-001EC2068236 -
I have a MacBook Air and for what ever reason the print settings for envelopes and normal A4 paper size changed from printing correctly each time I wished to print. Now, each time I wish to print either, I have to rest paper size and or Envelope vertical or horizontal. Can anyone assist with how to reset in order to print correctly without the need to rest each time please?
Log in to the Developer forum. You will find instructions on how to install the lastest beta. Your problem is the beta you have installed has expired. All of them did on October 5; you will find hundreds of threads discussing this. If you have a beta it is assumed that you will continue as a beta tester, so a simple update using iTunes will not work.
If you no longer want to be a beta tester install the GM 7.0.2 by restoring from iTunes using DFU mode. -
I have a Canon MX882 printer and more often than note get an error message that says "Printer not Connected." When I check the printer itself, I get confirmation that the access point is connected. I tried reloading the software and that seemed to have solved the problem for awhile but I'm experiencing the same problem. Any ideas what is causing this?
Did you delete all receipts with iDVD in the file name with either a .PKG or .BOM extension that reside in the HD/Library/Receipts folder and from the /var/db/receipts/ folder before installing the new copy? If not then do so and delete the new application also.
Click to view full size
Then install iPhoto from the disk it came on originally and apply all necessary updaters: Apple - Support - Downloads
OT -
I have the last version of mac os x (Lion) and i have a canon MP 630 printer.
I went to apple store to buy the app "cd labeler" but i don´t know if it´s possible to print a cd, because when went to Canon to download the last version of cd label printer, there´s no for this last version of mac osx .
Even so is possible to print a cd?
Thanks
JorgeI have the last version of mac os x (Lion) and i have a canon MP 630 printer.
I went to apple store to buy the app "cd labeler" but i don´t know if it´s possible to print a cd, because when went to Canon to download the last version of cd label printer, there´s no for this last version of mac osx .
Even so is possible to print a cd?
Thanks
Jorge -
I have a pavilion dv7 and i can't see the screen just dark
Help,
Is there a screen brightness keyHi,
If you look closely, can you see any feint image?
Try connecting the notebook to an external display to see if you then have video output.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
i have a canon hf10 and need to be able to transfer my video from my camera to my computer so I can burn them to dvd is there a step by step process? i'm new 2 the mac world. I tried downloading imovie 7.1.2 but it said, "An eligible iMovie application was not found in the location /Applications." can anyone give me step by step instructions? i would hate to call the geek squad!!!LOL
and what's a firewire port? how do i know if i have one?
-
i have a canon 70d and just purchased elements 12. It will not open a raw file for me. I have been advised to download the latest version of camera raw, i have done this and it still says my camera is not supported. I really need to open my raw files. Can anybody help me.
You'll need to update to at least ACR 8.2 for the 70D to be recognized. The normal way to update PSE12 to the latest CR is to use Help / Updates in the Editor which should update to ACR 8.5.
According to Adobe's website PSE12 shipped with ACR 8.1 and you say it says yours is reported as ACR 8.0.
Are you using PSE 11 and not 12? PSE 11's maximum ACR version is 8.0. -
Hello to you in the company Apple. I am having a problem in the Apple Store ID does not allow me to work on the Apple Store I hope that you will help. You have sent you yesterday and today I want to call the phone number for Mei you and explain to you why with many thanks
Sorry, but you can't reach Apple here. This is a user to user forum and Apple does not follow these discussions.
Try this link to contact Apple directly:
Apple - Support - iPhone - Contact Support
Did you already have a look at this page?
App Store Frequently Asked Questions (FAQ) -
I have a Canon MP640 and I am trying to connect my Macbook Air to the wi-fi how do I do this?
I have a Canon MP640 and I am trying to connect my Macbook Air to the wi-fi how do I do this? I have been able to connect through the USB no problems.
What version of mac are you running? Have you downloaded any of the drivers/software off the website yet? If not, you will need to download and install the CUPS Printer Driver and the Canon IJ Network tool.
http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_series/pixma_mp640#DriversAndSoftware
Then, you will want to open and use the Network Tool to set up the network connection
http://kbsupport.cusa.canon.com/system/selfservice.controller?CONFIGURATION=1011&PARTITION_ID=1&secureFlag=false&TIMEZONE_OFFSET=&CMD=VIEW_ARTICLE&ARTICLE_ID=69015
Hope this helps! -
I have an Iphone 3gs and today I had taken some pictures and my battery was 8% i was looking at the few I had took. Then my phone died but when I plugged it into the charger and got it on I went to upload the pictures but they were deleted! All my other pictures that i have taken are still there, it just deleted the ones I took a couple of hours before it died!
I was just wondering if there is anyway of getting them back at all? and how common is this?Sounds like your iPhone was hacked to unlock and now updating locks back to the original carrier.
Where did you get the iPhone? -
I have Lightroom 3.6 and it does not recognize the raw images from my canon 7d mark II, suggestions, do I need to upgrade?
Yes, you need an upgrade for native support in Lightroom. You need version 5.70 or higher; current version is 5.71.
Alternatively, you could use the most recent DNG converter and convert the raw files to DNG files before importing into Lightroom. -
i have a 2007 macbook and today the screen went all pixelated and i dont know how to fix it any help would be nice
Boot from your installer disc. If the problem is still present, then take it in for service.
-
We have a Canon SX40Hs and cannot activate the digital zoom function. I have tried changing the mode from Auto to "P" to "Tv" etc and the dig zoom function is greyed out and not accessible. Any help?
ThanksActually, this is a friend's camera, but yes, I went to the menu and when I got to the digital zoom option, it is greyed out (not accessible). That is the problem. I shoot in the EOS line so figured maybe there was a custom function somewhere that was causing the problem, but Power shot line apparentley doesn't have custom functions. Thought maybe digital zoom is only availabel in certain modes (pernaps not available in "green square"), but changing mode didn't seem to make it accessible either. I am just not familiar with the powershot cameras so ... any other suggestions?
-
I have a Canon 60D and I am unable to view or transfer photos to the Ipad using the SD Card reader. I have been able to view images with a Canon T3i. Are there certain settings I need to set on the 60d or should it work automatically? anythoughts or ideas? thanks
Are the photo's you're trying to view/download in Raw? I've had difficulty downloading Raw files, but have had no issues downloading JPEG files. Also, check a setting in your Canon, called communication. From what I've read (I'm a Nikon D5100 guy myself), communication needs to be set to PTP, not normal. I'm not sure how that will help if the pictures are already encoded?
Well scratch what I've written. I just googled the 60D and supposedly, JPEG and Raw are supposed to transfer through the SD card reader easily. So, I'm clueless. Sorry.......
Message was edited by: rbrylawski
Maybe you are looking for
-
how can i find a song that i accidentally hit hide on and now cant find it anywhere where can i locate it?
-
System calculating open order value
Hi, We have maintained delivery tolerance (10%) and update group in credit management is 12. If i create a sales order of 10 kg and delivered 9.3 kg than bill the same quantity to the customer and sales ordered will be complete because of delivery
-
kind of OT i guess. Here's the situation: I have a parent div and a child div. They both have an onClick event applied to them: <div onClick="function()"> some content <div onClick="function()"> some content </div> </div> They don't have an ID. When
-
Having trouble putting movie on new Zen MX
*having trouble putting movie on new Zen MX? just recieved it in the mail. i am able to load mp3's without any problems. i want to put Incredible Hulk on to it for a road trip. Creative Centrale has no problem seeing the movie, i can use the rip func
-
Sending photos "open" rather than attachment
I use mac mail version 2.1 I often send photos of our granddaughter to family and friends from iPhoto. Is there a way for me to send them "open" in the message rather than as an attachment? Thanks so much njw2