I have a Canon Pixma MX 880 and when I try to change or delete photos on my SD card,
I have a Canon Pixma MX 880 and when I try to change or delete photos on my SD card, I get the following error:
"You need permission to perform this action" and below that:
"You require permission from the computer's administrator to make changes to this file".
Printer is set up wireless.
I am signed on as administrator, can't get access with any user account.
The old problem ridden HP Photosmart I replaced, I could change, delete, etc. without issues.
Solved!
Go to Solution.
hi ehnco,
It sounds like the Read/Write attribute on the printer needs to be changed. Use the following steps to change the read/write attribute:
Make sure that the machine is turned on
Press the <Setup> button.
Use the button to select [ Device settings], then press the <OK> button.
The Device settings screen is displayed.
Use the button to select [Device user settings], then press the <OK> button.
Use the button to select [Read / write attribute], then press the <OK> button.
Use the button to select [Writable from LAN PC], then press the <OK> button.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
Similar Messages
-
I have a Canon SD 970 IS. When I try to take a picture it tells me the card is locked.
My Canon SD 970 IS is telling me my card is locked and I can't take pictures. The battery is fine, there's plenty of room on the card. Can someone please tell me how to fix this.
Unlock your card. There is a small lever on the side of the card, slide it to unlock position.
http://www.ccwitness.com/images/SDCARD-lock-location.gif
Weekend Travelers Blog | Eastern Sierra Fall Color Guide -
Hi
I have a problem with color prints from photoshop elements 12. The pictures are too light and with strange colors. I have a Canon pixma mg615I0 printer and use mac os X yosemite. The pictures are taken with a coanon eos 550d in the color space sRGB. I have followed adobes recommendations and have tried both letting the printer respektive photoshop manage the colors. But nothing works. I see that there are different opinions about which is best to do so I tried both. I have the latest printer driver installed. Can anyone help me with this?Do the following:
Print a test page from the printer. Perhaps the print head needs cleaning via its maintenance facility.
Let the printer manage colors, not PSE
Calibrate the monitor -
I have a Canon Pixma i4700 printer and since buying my iMac I'm finding it difficult to print photographs without a severe warm (red) tone.
What am I doing wrong?I can't give you detailed instructions, but there should be a way to print a built-in test page. If the color is off on that, the printer has an internal problem such as a clogged head.
-
I have the CANON REBEL T5 1200D, and when i connect it to my mac which is 10.10 the new OS X YOSEMITE it says that it "Cannot be used with this version of the operating system" why does it say that if my camera is listed under the supported digital cameras for OS X YOSEMITE?
Put simply, the minimum system requirements for iTunes have changed. You need a Mac running at least OS X 10.6.8.
It's best you look online to see if your model of Mac can be upgraded to at least 10.6.8 "Snow Leopard". It should still be possible to order a copy of Snow Leopard if so. -
My new iphone is asking for an old iCloud password I can't remember the password, don't have access to the old email and when I try and answer the security question it is telling me that my date of birth is wrong?? Arggghh help?
Contact iTunes Customer support... it is not possible to bypass Activation Lock.
-
I have three Blue Yeti USB Microphones, and when I try to create an aggregate device in Audio MIDI on my MBP it lets me select two microphones but not the third. At first I thought maybe the third microphone was just defected or something but I tested the mic individually and it works fine. It'll let me use two Blue Yeti's and another microphone but not three Yeti's at once.
David Boroditsky wrote:
The problem is that the mac chokes on having 2 identical mics attached at the same time.
Ive had 2 identical USB AT2020 mics connected at the same time on both macbook pro and macbook Air.
The "Yeti" mics, are, lets say undesirable, and low to mid computer consumer mics. -
i have the new version of iMovie, and when i try to start the program, i can't because it says that it is looking for some movie files from the Iphoto, so all the program is locked up... how can i do to restart the program??
Hi
Did You ever use - iPhoto ?
Did You may be direct iPhoto to a different Photo Library
As iMovie tries to find the appropriate photo library - it can get lost if iPhoto direct it into a Library on a not connected external hard disk or to a strange location - And iMovie HANGS.
Do - When no other program is running that might interfere
• Start iPhoto - BUT NOW KEEP alt-key (option key) DOWN during the full Start-Up process
• Now iPhoto let's You select Photo Library
• Select the one in Your Account / Home folder / Pictures ! !
• Then iPhoto should start up OK
• Now Quit iPhoto
• START iMovie
Does it still hangs - then I would suspect - iMovie Pref. file
If it Run's OK - Then HURRAY !
Yours Bengt W -
hey.. i have a ipod touch 2 gen and when i try to connect to wifi it cant find it,
even though my laptop does so it not my router..
can anyone help me??Is this the problem:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
Otherwise
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router.
- Reset networks settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
Not the the 2G can only see/connec to the b and g wifi bands. It does not see any n band networks. -
I have an apple tv 3rd gen and when i try to open HBO GO it loads but then the screen comes black,it doesnt work.what can i do?
Welcome to the Apple Community.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router.
Reset the Apple TV (Settings > General > Reset > Reset all settings)
Restore the Apple TV (Settings > General > Reset > Restore) -
I have bought a new ipad mini and when i try to use app store asks me my email but it does not let me review, it get blocks and does not let me tap review
You have to provide email to access app store,dont expect walk in and walk out
-
I dont know what to do it wont take my security answers when i answer them correctly, and when i try to change them it askes me for them again and still wont take them, and the worst part is i cant make any purchases. Please help its been going on forever. Btw i just got a new laptop and i synced my iphone with it, and for the First Purchase i have to answer the secutiry questions. See my problem?
Congratulations on being the next victim of Apple's current SNAFU!
If you don't have a rescue email address set, then you're SoL.
If you do, then reset your info and check in there.
If not, you'll have to contact iTS, and wait for God knows how long for Apple to complete its pending investigation in this SNAFU.
iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html -
I forgot the answers for the security questions and when I try to change them (My Apple ID -> Manage your account -> Password and Security) I'm asked to answer the exact questions I'm trying to change because I don't remember the answers. How can I do it?
Can't you try the email option instead?
-
im trying to make a payment but it says the CC is not aprovved for Salvadorean Itunes store, and when i try to change my country dont let me cause i need to make that payment .. what should i do?
Supply a payment method which is valid in Salvador, or ask the iTunes Store staff for assistance.
(113417) -
Hi,
I have a Mac OS X version 10.5.8
I now have a Canon Pixma Printer MG 5250 and it doesn't seem to recognize iPhoto, where all my folders of photos are in the computer.
All other aspects of the printer such as scanning and printing documents are working. When I open the printer's
'photo print' box on my Mac, it cannot access iPhoto.
I would really appreciate any feedback and suggestions as to what to do.
thanks.If you want to print a photo that's in your library you should do so from iPhoto. Select the photo, crop to the size you want to print and type Command+P to start the print process. In the Print window select the paper size and print size, printer and then click on the Print button.
OT
Maybe you are looking for
-
SQL modeler can not import from data dictionary
It was very frustruted to see that the SQL Modeler hang in import from data dictionary of a database as part of revise engineering. I have to question myself if sql modeler is a serious tool and should I give up.
-
Using more than one keyword don't not work to filter pictures.
hi, i am new to aperture and currently try to filter images with keywords. i have for instance a picture of a dog in my china projects. the keywords attached to the dog picture are: "Animals, Dogs, China, Xian. all keywords capitalized and separated
-
UTL_TCP timeout (8.1.6)
Hi, using UTL_TCP (Oracle 8.1.6 - Linux platform) we're able to comunicate to some application clients (Delphi - Windows platforms). Sometimes, a client is not responding (not due to our applications). When this occurs, an error (UTL_TCP.NETWORK_ERRO
-
How to populate LOV at run time in developer
I want to populate my LOV with with say SELECT NAME FROM MY_TABLE Also I have text item in my developer form I want to display this item depending upon the result of my query i.e If have ten record this text item would show ten records and if have el
-
Can the B210 Print on both sides?
I have an Photosmart Plus e-All-in-One Printer - B210a running on Windows Vista on an Compaq laptop. I know it is not a duplex printer. But my old HP 940C allows me to select a "Print on both sides" button on the printer properties advanced page. Doe