I have a canon t2i and when I make a movie on imovie and try to upload it to youtube it is not in HD, I know I'm recording in HD on my camera, but I have no idea why it is not in HD. Can anyone help?
h
Hi wjosten,
Yes, I have checked the app folder and there is no imovie in there, there is also nothing in the trash.
I have also checked the HD for imovie and it seems as though it's just gone?
Thanks for your help, if you have any other suggestions I would really appreciate them.
Similar Messages
-
^ as I said above, I've made the account a long time ago and now have 30 dollars racked up but can't use it as Apples BS security blocks all purchases. Is there anyway to get around or fix it?
Take a look here:
https://discussions.apple.com/message/25723428#25723428 -
I WAS UPDATING SPFTWARE ON MY IPHONE BUT ERROR 56 CAME UP WHEN I TRIED TO RESTORE ERROR 3024 CAME UP NOW ON THE SCREEN IS A SYMBOL OF THE CBLE AND ITUNES CAN NOT RESET IT CAN ANYONE HELP??
You'll have to put your iPhone in Recovery Mode.
Recovery mode
If you've never synced your device with iTunes, or haven't set up Find My iPhone, you'll need to put your device in recovery mode. Then you'll restore your device as new or from a backup.
This will erase the device and its passcode.
Disconnect all cables from your device.
Hold down the Sleep/Wake button, then "slide to power off" to turn off your device.
Press and hold the Home button and plug the device into your computer. If your device doesn't turn on automatically, turn it on. Don't release the Home button.
Continue holding the Home button until you see the Connect to iTunes screen.
If iTunes doesn't open automatically, open it. iTunes will alert you that it has detected a device in recovery mode.
Click OK. Then restore the device.
If your device doesn't go into recovery mode, try steps 1–4 again. -
I bought a second hand G4 iBook with iLife 09 on it. I have copied iLife to my new Macbook Pro. The applications would not open, so I did a software update and update all three applications, but they will still not open. Can anyone help?
The seller should have given you the original disk so that you can reinstall as needed. But it likely was a single-user license (which really means single computer) so you can only have a copy on one computer at a time. If the seller didn't give you the disk he is probably still using the software on his new Mac. Your best option to get any of the iWork apps to use in OS X 10.6.6 or later is through the Mac App Store. You can then install them on any Mac you have that has access to the Mac App Store using your Apple ID.
-
I've just brought myself a new MacBook Pro from a friend I have no idea how to use them I YouTube how to reset a MacBook Pro I done everything all we'll In till you reinstall then it say "this disk is locked"??? Can anyone help me please
I done everything all we'll In till you reinstall
Please detail ALL you have done so far in the way of troubleshooting? Need this info to avoid the been there done that scenarios.
Care to share which OS you are using?
Which MBP model do you have? -
Hello. I have an ipod touch 4th generation. I have been trying to work facetime and imessage for 3 days, i sign in with my user ID and it says signing in and verifying but then it goes back to the sign in page. Can anyone help?
I disabled all my computer's firewalls and sure enough, IT WORKED!! My iPod is updated and just now finishing restoring! Thank you SOOOO SOOO much. : D
-
I'm trying to move my photos from my iphone to my PC, every time I go to my Computer it comes up with PhotoStream and iPhone , unfortunately this does that have all my photos from iPhone in it. Can anyone help me?
I'm using the most up to date software.
ThanksThanks for that, on the sync via iTunes, when my iphone is connected to iTunes via USB my photos tab says my iphone but I can never see any pics there. If I press Sync it still doesn't show anything.
Correction from my original post, it only comes up with PhotoStream on my computer when I'm connected via USB. -
I am trying to connect to my uni wifi, and when i click on the wifi, it directs me to a log in page. However, the two boxes to enter the username and password do not appear. Can anyone help me with this???
You didn't say what you have already tried, but if you haven't already done so, power-cycle your router (unplug it for 15 seconds then plug it back in), then on your phone go to Settings>General>Reset and tap Reset Network Settings, then try joining your wifi again.
-
I cannot get my messages/text messages to work om my Hi. I am sending this thru my iPad. Respond and let me know you got it. Fun fun fun. . I did go and try to another Apple ID different from my iPhone but it still will not work. Can anyone help me?
chicx wrote:
This is the third time of writing this on your Apple Support Communities!
Not with your current user id.
Far too much uneccesary information in your post, which only confuses things, a vast amount!
Let's start with iTunes.
Have you updated iTunes to 11.1.5, because the previous version did appear to have an issue about seeing iPods?
With iTunes 11.1.5 installed, look in Edit/Preferences/Devices, (or use the ALT key, followed by the E key and then the F key) and make sure that the box named Prevent iPods, iPhones and iPads from syncing automatically does not have a tick in the box.
Once you have doen those two things, check to see if the iPod is seen by iTunes.
chicx wrote:
By the way, what does IOS mean? (I thought IO stood for operating system, but am flummoxed by the S on the end.
Really?
OS stands for Operating System. (In computer speak, IO means Input/Output.)
iOS originally stood for iPhone Operating System, but it now refers to the iPod Touch and iPhone. The iPod Classic, which you have listed in your profile as your iPod, does not use iOS.
I assume that you have been listening to the Podcast in your iTunes on the computer as you cannot transfer it to your iPod. It's what I'd do. -
For some reason, the Flash Player on my MAC Pro stopped working, I've checked the install on my Adobe Flash Player and the are current, but the plug-ins don't seem to be working. Can anyone help me get it working?
It happened w/ my MacPro 2.66 GHz Dual-Core Intel Xeon about 5 months ago; tried everything I could think of including multiple downloads of Flash, and hadn't seen any solutions here. Adobe insisted many times that I download & update, but the newest vers. wouldn't work on the computer.
On checking Adobe/Flash was reading the computer as being an earlier model. So the new version of Flash wouldn't work w/ it. Snow Leopard 10.6.8 was being read correctly but not the computer model (can't remember what MP model it was reading).
Nothing worked. So -- a very old PC trick: If nothing else works get the hammer out and bludgeon it-- might work. So I reset everything by putting the Snow Leopard install disk in, held down 'C' on restart and let it run.
Didn't take anything off the HDD first, just ran the install disk over everything.
The experts on the forums are probably cringing right now & I'd like very much for them to jump in. Love to know how my computer model was being mis-read. All I can say is, for the brave and desparate, it worked for me. Something to keep in mind.
It helped that I had a new computer on order & have 2 backups, one being mandatory. Might work only the one time but worth a check.
Good luck on working this one out. -
I have been creating an Alernate layout (tablet) from my desktop version. Today when I open it the Tablet Plan is not there! Can anyone help me please. I am using windows 7. I have not had any problems like this before. Could it be a clitch or a muse error.
Deborah
[email protected]Maybe a silly question: You switched to the "tablet" button on top of the "plan" window?
-
I downloaded itunes but when i try to install i get an error saying "There is a problem with the windows install. A programe needed to install could not be open"
can anyone help?Ok, Below is what worked for me somewhat.
Okay ... try downloading and saving a copy of the iTunesSetup.exe to your PC from the Apple website:
http://www.apple.com/itunes/download/
Now download a trial version of WinRAR:
http://www.rarlab.com/download.php
Open the iTunesSetup.exe with WinRAR, and try to run the standalone install of Apple Application Support from the AppleApplicationSupport.msi you find in there.
It works now BUT there are still problems. It is not allowing or recognizing my Cd/DVD player and i CANT burn. Looking still for this fix. -
I was told I could sync my music on my pc with my ipad2 by an apple agent. I hooked my ipad2 up to my pc and did so, but now I can not open any of my apps on my ipad2. when I try it just flickers and does not open. Can anyone help?
On you iPad, force close all the Apps in the multitask window.
Follow these steps to force an app to close:
From the Home screen, click the Home button twice.
Tap and hold on the app.
When it starts to jiggle, tap the to close it on by one until all cleared
Now do a Soft reset of your iPad:
Hold both Home and Sleep button for around 10secs until you see the Apple logo then release. After it returns to Home screen, try your Apps again and see if this resolves the issue. -
Can't sync ical on my iphone and imac. email and note work but not ical. can anyone help.
can't sync ical on my iphone and imac. email and note work but not ical. can anyone help.
thanks
bmoreimacSo how can i make it work that way, i asked one of my friends, and she says it works like that...when she delete the email on her iphone it is deleted on the mac too, what do i do to change this?....my mail it's hotmail, i don't know if its relevant
-
When I try to share a project to theater I get the message Your Theater could not be opened.There was a problem reading your movies from iCloud and the project does not share. Can anyone help?
Set up iMovie Theater and iCloud
In order to take full advantage of the capabilities of iMovie Theater, you must be signed in to iCloud. If you are signed in to iCloud, movies and trailers shared to iMovie Theater are automatically uploaded to iCloud. You can also turn off automatic uploading, and upload just the movies and trailers you want, or delete individual movies and trailers from iCloud. For more information about the Theater, see iMovie Theater overview.
If you sign out of your iCloud account on your Mac, all iCloud movies disappear from the Theater, but they are not deleted; the movies reappear when you sign in again. If you ever run out of space in iCloud, an alert icon appears in the top-right corner of your movie, indicating that you can’t upload new movies. For more information, click the icon. After you upgrade your iCloud storage or clear space, your movies automatically appear in iCloud again.
Hide
Set up automatic iCloud uploading
Choose Apple menu > System Preferences, and click iCloud.
Make sure you’re signed in, and then select the Documents & Data checkbox.
Click the Options button next to Documents & Data.
Make sure the iMovie checkbox is selected.
In iMovie, choose iMovie > Preferences.
Select the “Automatically upload content to iCloud” checkbox.
To turn off automatic uploading, deselect the checkbox.
Maybe you are looking for
-
ESS User maintenance by T-code HRUSER - User ID change
Hi, I have been creating ESS users ( P Users ) by T-code HRUSER. For instance, there is an employee number 5. It does two steps for us. 1. Creates R/3 user as P00000005. 2. Maintains system user name at IT 105 as P00000005. But, now I need to change
-
Hi, From where the adress field in delivery address screen of a purchase requisition and Purchase order gets updated? even after I erased the contents it is again populating in ME22N. Is this field will affect in creating outbound deliveries for Stoc
-
My iphone screen is not visible - i can hear texts and calls, but cannot access them
I have an iphone 4s and I am not able to see the screen - it's blank, however, I can hear when I receive a text and call.
-
Hi, I have a problem. I can build and run MIDlets with KToolbar but not with NetBeans. When i have build it, and should run it on the mobile(a P900) I got some error telling me that I is running on the wrong platform. I doesen't think that I don't ha
-
ALV using ABAP Classes and Objects
Hi All, I am trying to print the values in my internal table using ALV, using ABAP classes and objects. Here the title for columns are picked based on the title specified in the data element. I want to set the title of my columns by my own. how to ac