I have a communication error between Lightroom 5 and my printer. It prints photos about 1/2 strength in color. Printer checks out ok. WHAT CAN I DO?

I have a communication error between Lightroom 5 and my printer. It prints photos about 1/2 strength in color.. The printer checks out ok. What can I do?

Similar Messages

I have os x 10.3.9 and when i go to do a software update my system says its up to date what can i do?

i have os x 10.3.9 and when i go to do a software update my system says its up to date so what should i do

i downloaded the file it was the full thing 7.2 GB but it was a .dmg and my mac would not open it any ideas?

HT2518 Migration assistant can't find my external drive - I ran the disk utility on it and it checked out. What can I do - I am trying to transfer PC files to my new MacBook Pro. Thanks

Hi,
Wonder if someone has a suggestion for getting Migration assistant to recognize my external drive so that I can transfer some PC files from it to my MacBook Pro? I have been opening files in the drive with the Mac without a problem and I ran the diagnostics utility and the drive verified. Still, migration assistant spins and spins without finding anything. There's a lot of files and doing it manually with take days.
Thanks!

Personally I have always used the manual method for moving my files over to a new iMac and never use Migration Assistant.
Go to the Apple drop down menu and select Force Quit.. and if Migration Assistant has failed, force quit it and try re-launching it again from your Applications Utility folder.

Synchronization error between LMDB and SMSY

Hello Experts
I have a sync error between LMDB and SMSY entries. I want your help to make this synchronization to Solution Manager 7.1 SP07.
Thank you very much for your help
Juan Carlos Salazar R

Solman Setup - Configuration Lost
To try to solve the synchronization error
I have been running a Report for get some information and as a consequence all the information into the solman configuration was lost. I mean everything, all the clock (the date of modification) are in zero, and all the status are grey.
Someone know How to bring this information back; without performing a backup or to perform a setup again.
The report is the RLMDB_SYNC_TECHNICAL_SYSTEM

I received a low ink warning on my mac for my epson artisan 837 printer. I replaced the cartridge that was low but it still reads low ink on the mac but reads full on the epson control panel. I am also receiving a communication error between the mac

I received a low ink warning on my mac for my epson artisan 837 printer. I replaced the cartridge that was low but it still reads low ink on the mac but reads full on the epson control panel. I am also receiving a communication error between the mac

What exactly is the error?
And, we'd need some info re. your Mac model and OS version - you are not running iOS on it.
You need to realize that this model has been discontinued and the last driver updates are dated about a year ago. If you are running Mavericks, there may not be an updated driver for it. But you can try to delete the printer and add it again to see if that will work.

I would like Adobe to develop a programme that sits between Lightroom and CS6

I have Lightroom 1, 2, 3 & 4 (which I can't use at the moment because it is too slow) I also have CS3.
I am an enthusiastic amatuer and don't need the catalogue facility in Lightroom (which can be exasperating at times) and I don't need 90% of the stuff on CS6 as I do most of my editing in Adobe Camera Raw.
I would like to see Adobe develop a programme that sits between Lightroom and CS6 where the Lightroom layout is kept much the same only instead of a catalogue have a browser in its place, I would also like to see the clone tool & the healing brush replaced with proper ones that work like the ones in CS6, I would also like to see an adjustment brush with a facility to invert my selection or some sort of masking, these are the tools I use most often in photoshop.
Does anyone feel the same as me and if so how do we contact Adobe to let them know.

Butch_M wrote:
JimHess wrote:
I think it's really presumptuous for anyone to dictate how someone else should handle their post processing or their file management.
I think it is extremely presumptuous of you Mr. Hess, to confuse honest, friendly advice with an attempt to "dictate" how someone should handle their workflow ... my comment was offered as advice ... I was not handing down an edict to force anyone to do anything ....
It's one thing to bury your head in the sand and ignore sound advice ... it's quite another to accuse others of forcing their will on someone ... just because you had a bad experience about discussing another feature in another thread ...
I could really care less if you, the OP or anyone else doesn't adopt a sound DAM solution ... I don't have to work with your images ... but if I did, you can be assured they would be properly cataloged even if you didn't see the value in the process ...
Whateve.

I have been using itunes all day and then it wanted me to install a newer version. When I did it said I can't because it's missing mdsvr80 or something so i downloaded that now it has another error. How do I get itunes back the way it was or to work?

I have been using itunes all day and then it wanted me to install a newer version. When I did it said I can't because it's missing mdsvr80 or something so i downloaded that now it has another error. How do I get itunes back the way it was or to work?

See this User Tip by turingtest2
https://discussions.apple.com/docs/DOC-6562

I have a A12E6 error when downloading and installing apps

I have an
A12e6 error when downloading and installing apps yesterday i had the A12e1 error so i used the cleaner tool and did a new install but today again i have an arror A12e6
Do you have a solution for me???? (mac osx 10.7.5)
kind regards Arold

Hi Arold,
Welcome To The Forums
http://forums.adobe.com/thread/1197816 or http://forums.adobe.com/thread/1291134 may help,
Thanks!
Eshant

I have been getting errors in itunes and it said to redownload it. I started to download and get an erro the says Service apple mobile device failed to start. Verify that you have sufficient privileges to start system services. What do I do?

I have been getting errors in Itunes and it said to redownload it. I started to download and get a error that says "Service 'apple mobile device' failed to start. Verify that you have sufficient privileges to start system services" .
What does this mean and how do I verify what they are asking me to verify???

Hi annibu757,
If you are having issues with iTunes after an attempted update, you may find the following article helpful:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Regards,
- Brenden

Image size changes when moving an image between Lightroom and CC.

Image size changes when moving an image between Lightroom and CC.
I opened a .dng image in LR and then opened it in the Develop module. I clicked on Crop Overlay and then on the ‘As Shot’ drop down menu (the lock is closed) and cropped to 11 x 17 and clicked ‘Done’-.
I click Cntl-E and the image opens in CC. There I click on Image > Image Size and the Image Size is 13.288 inches by 20.533 inches.
Why does the image size change?
I believe there is a menu to control the size of the image and I've looked everywhere I can think of in LR and CC, I googled various descriptions and I checked two of Scott Kelby's books, but I just can't figure out how to keep the image a consistent size when moving between LR and CC.
Help!...Please?

The penny will drop soon or maybe the cloud will lift.
In Lightroom all editing is undoable/nondestructive.
Hence a crop of 3x2 is not inches, centimetres, pixels or anything else. It is jst a ratio. When a file is exported, either to PS or disk, then the crop ratio has size determined in respect of pixels and inches or cms.
So my 6000x5000 pixel image I will crop to 3x2 that leaves (before exporting) a 6000x4000 file.
Now when exported it can be set to export at
100pixels per inch and will end up at 60x40" when printed.
200pixels per inch will end up at 30x20"
300ppi will end at 20x13.3"
You will notice in the Crop Tool there are no size denominations such as inches or centimetres as an image file only has pixels and the determination of size is done through exporting or printing.
Hope that helps somewhat..

I am subscribed to Photoshop only and I want to know if I can change my subscription to have your new offer of Lightroom and Photoshop together for the same price I am paying for Photoshop alone?

I am subscribed to Photoshop only and I want to know if I can change my subscription to have your new offer of Lightroom and Photoshop together for the same price that I am paying for Photoshop alone?

Contact sales support by web chat. They can cancel your current subscription and transfer you to the new one if you are within certain criteria. Otherwise you may need to wait until your subscription runs out and then sign up later.
Mylenium

I am trying to reinstall Creative Cloud with all my apps, however I have a download error: Please retry and try again or contact customer support??

I am trying to reinstall Creative Cloud with all my apps, however I have a download error: Please retry and try again or contact customer support??

WHAT download error?
A12... download & install error http://forums.adobe.com/thread/1289484
-more A12... discussion http://forums.adobe.com/thread/1045283?tstart=0
or
Code 6 & Code 7 http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
or
Error 46 may be caused by Comodo internet security
-Comodo may kill install https://forums.adobe.com/thread/1460361
or
What is the exact error code that you see?
-try some steps such as changing browsers and turning off your firewall
-also flush your browser cache so you are starting with a fresh browser
http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip/
http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Need camera raw plugin 8.5 to switch between Lightroom and PS CC. Tried to update CC. It say installing but nothing happens.

Need camera raw plugin 8.5 to switch between Lightroom and PS CC. Tried to update CC. It say installing but nothing happens.

You may need to do a manual install:
http://helpx.adobe.com/x-productkb/multi/camera-raw-applictions-cannot-updated.html

I have a CC subscription for Lightroom and purchased the upgrade for my standalone Ver. 5 to Ver. 6, but I can't install the standalone upgrade. Anyone have any idea how to do it?

I have a CC subscription for Lightroom and purchased the upgrade for my standalone Ver. 5 to Ver. 6, but I can't install the standalone upgrade. Anyone have any idea how to do it?

sjrozas wrote:
I'm only trying out the subscription. Thanks for being so concerned about my finances.
Sent from my mobile.
Your initial post indicated that you had a CC subscription. That seems to imply that you have subscribed. If you hadn't already purchased Lightroom 6 I would suggest that you wait until you decide about CC. You really don't need both because the Lightroom program is precisely the same except for Lightroom 6 without the creative cloud has no Lightroom mobile capabilities. But I was only trying to help.

Urgent - I have written select query between loop and endloop, Ple help out

Can any one help out me on this select query. I have written select query between loop and endloop. When I execute the program it will take too much time in this query. Please help me out. Its very urgent.
LOOP AT l_i_invoices ASSIGNING <l_invoices>.
      CLEAR alv_wa.
      alv_wa-bukrs = <l_invoices>-bukrs.
      alv_wa-gsber = <l_invoices>-gsber.
      CLEAR l_instid.
      CONCATENATE <l_invoices>-belnr <l_invoices>-gjahr INTO l_instid.
      SELECT top_wi_id FROM sww_wi2obj INTO TABLE l_i_swwwihead
              WHERE catid   = c_catid_business_object
                AND instid = l_instid
                AND typeid = c_typeid_invoice
                AND removed = space
                AND ( wi_rh_task = c_task_buyer_message
                   OR wi_rh_task = c_task_buyer_message2 ).
      IF sy-subrc = 0.
        <l_invoices>-flag = 'X'.
      ELSE.
        <l_invoices>-flag = ' '.
      ENDIF.
      MODIFY l_i_invoices FROM <l_invoices> TRANSPORTING flag
                            WHERE belnr = <l_invoices>-belnr
                               AND gjahr = <l_invoices>-gjahr.
      APPEND alv_wa TO i_alv.
    ENDLOOP.
Thanks in advance.

Here is a way to solve this problem.
Choose somewhere before this loop processing to use that select. Therefore, you'll need use FOR ALL ENTRIES <that_loop_table> clause, and in the WHERE condition you need to specify that same fields.
This way, you will have an internal table with all data you'll need to check.
Then, inside your loop statement, use the READ TABLE command with the clause WITH KEY field = value, to read that record and use the value found.
Like this sample:
SELECT bukrs lifnr umsks umskz augdt augbl zuonr gjahr belnr buzei
         waers xblnr blart gsber ebeln zfbdt zbd1t zlsch
INTO TABLE tg_bsak
FROM bsak
FOR ALL ENTRIES IN tl_bkpf_sel
WHERE bukrs EQ tl_bkpf_sel-bukrs AND
        lifnr IN s_lifnr AND
        augbl EQ tl_bkpf_sel-belnr.
LOOP AT tg_bseg INTO wa_bseg.
    READ TABLE tg_bsak INTO wa_bsak WITH KEY bukrs = wa_bseg-bukrs
                                             gjahr = wa_bseg-gjahr
                                             belnr = wa_bseg-belnr
                                             BINARY SEARCH.
if sy-subrc = 0.
* do something
endif.
ENDLOOP.

I have a communication error between Lightroom 5 and my printer. It prints photos about 1/2 strength in color. Printer checks out ok. WHAT CAN I DO?

Similar Messages

Maybe you are looking for