I have a compact notebook and its not working when i turn it on it loads and then the screen turns b
its a model presario cq61notebook pc
system id 363f producct id wa980ua#aba
Was this iPhone jailbroken?
Similar Messages
-
When I get to the login page on my macbook, I type in my password and it starts to load, but then the screen turns blue and it goes back to the login.
Iv tryed this numerious times still keeps going back to pasword. Can not get any further. Tried restart holding shift key.. still nothing. What do i do?Thank you for your help.
I couldnt get to the hard drive/ desktop. Soft login not even working. So i could not do any of that.
In the end i took it to Apple and its actually the hard drive on its way out. A common issue with that series of Mac. Funny seeing i dont use this mac much. However being 2.5 years old and out of warrently, Apple have recognise this issue with this series/ Model and installing a new hard drive at no cost.
Very luck and greatful. And not feeling so dumb that it was something i did or could troubleshoot myself.
Hope this helps others that it just might be your hard drive failing. -
I was having some problems with my mac, safari and itunes was freezing alot. I have to force shutdown and when I tried to start up again i get to the login page, type in my password and it starts to load, but then the screen turns blue for a few seconds and it goes back to the log in screen. What should I do?
Please Help!!Somewhat similar problem:
Put in the password, hit enter, the screen goes blue for half a second, then goes back to login screen and carries on logging in as usual. Drives me mad. It doesn't happen with a fresh Lion installation, nor if booted into safe mode. On the machine in question it also happens to new user accounts.
I've removed all login items, including Startup Items and Launch Demons (pun intended) and Agents, I've compared system login plists with a fresh Lion installation - can't see differences. I've removed Little Snitch and PeerGuardian (no more third party kexts).
@Carolyn: I've done disk maintenance with DiskUtility and fsck and even DiskWarrior, cleaned caches, etc. etc.
Any ideas would be gratefully received.
Sorry for trying to hijack the thread (as it's not about Lion), but it seemed dead anyway. -
hi
i downloaded this app but disappointed. i purchased credit but this app not working. when i dial a phone number and click on cal button but not working means nothing happens. and when i click on contacts, then the app will close.Delete the app, then reinstall it. If it still doesn't work, contact the app developer.
-
Plz help
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I just got the iPhone 5 and noticed that the message alerts will only alert once . I have it set up as 3 times and its not working . Please help. I'm running 6.0.2 and I really starting to get ****** off with apple products
Instead of getting annoyed, read the User's Guide and try basic troubleshooting.
-
I have purchased new iphone 3gs, its usb cable and charger not working.When I plugged in usb cable to my laptop it says"usb power hub exceeded". When I use another cable I have, it works fine.But the original one not working.Any help?
Are you connecting your iPhone directly to your PC or to a USB hub?
-
I have been having trouble connecting to my wifi on my ipad mini but my iPod is just fine......it will connect and then say "Unable to connect to network" I've tried resetting my ipad mini and turning off my router for 30 seconds and its not working.
What TC do you have? Model number direct from the base is a big help, it will be A1 followed by 3 numbers.. eg
A1409 Gen 4.. The new AC is A1470
How is it setup?
I need the whole network setup. what modem/router, how is the TC connected etc??
I also need to know what IP the ipod gets, so I can see what mode the TC or network router is working in. -
My 4s is not picking up phone signal I do not no how to sort this out I have tried resetting it and its not working still I do receive messages and can send them but can not call as it just says call fail
Try resseting the network settings in settings>general then go to reset a the bottom.
Then reset NETWORK settings. -
•I have just bought a Toshiba external hard disk to back up all my work from my macbook and its not working! I have checked the hard disk
its not working: (sorry for being so ambiguous), the computer recognises it, it comes up on my desktop, when i open it and try and drag a file across, it is unable to go into the drive, there is just a symbol indicating 'no' (i've read the instructions from Tosheba and there is no help). I have not partitioned the drive using the GUID partition scheme - i dont know what this means?!
-
Hi friends.
Ive downloaded the free trial version of Final cut pro x and its not working, an error message comes up saying: You can't use this version of the application ''final cut pro trial'' with this version of OS X You have OS X 10.8.5. it requires 10.9 or later, please can anyone Help.Just download Mavericks (10.9) its free and installed it (Mac App Store)
-
I have a ipod 5 and its not working and i will like to get it fixed and i want to see if i still have my warranty
Check Your Service and Support Coverage: Apple - Support
-
Hi guys i have an macbook 13 late 2007 and does not work when i start it up all u can see is blank white screen and after that its keep bepping high peech tone 3 times i was thinking the hard drive but im not too sure please guys help.
Try to reset the PRAM first then go from there.
http://support.apple.com/kb/HT1379 -
hello i was updating my ipod 5 to ios 8 and when it was in the middle of updating it came up that i had to connect to itunes and i have done so and its telling me to restore it and i have tried many time to and its not working. So what to i do??
What exactly happens when you try to restore via iTunes?
Error messages? -
My Ipod is frozen!!! Its a 4th generation and its frozen on an app, Ive tried everything like holding down the lock screen and stuff and its not showing the red thing to slid to shut it down....This is my only thing to use to contact my friends and its not working, i dont have a phone and i cant get one, so this is the onlything i have.....PLEASE HELP!!!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
How to load a file with out specifying its absolute location
Hi, I'm having some config files in a specific location. I'm setting that folder path to the CLASSPATH and trying access those file just by giving its name. For eg: contents are in e:\config folder I set e:\config to CLASSPATH and trying to load the
-
When I launch Sun ONE Studio the splash screen comes up for a few seconds, then it vanishes. I get a tab for Sun ONE Studio on my taskbar but clicking on it does nothing. So I can't actually see the IDE! I've had Sun ONE Studio for a few weeks and it
-
Documentation of function module
Hi All, How to create documentation of function module while creating function module Pl tell me step by step process Helpfule answer will definatly rewarded Regards Shashikant
-
Java.lang.reflect.InvocationTargetException when launching ESB
Hello, I'm getting a java.lang.reflect.InvocationTargetException when launching ESB. I've tried restoring the archives and generating new signatures, clearing my local java cache and restarting the server. I'm running NW 711 SP06 and are using Java 1
-
I have an Agilent 34970A DAQ that I am trying to set the NPLC to 10 and keep it set when I issue a temp measurement command to the channels. Right now I can issue the NPLC 10 command to set the channels and it works but when I send the measure chann