I have a corrupted version of Snow Leopard (10.6.8) and do not have the install disc to perform remote start and repair.
I am wondering if I can download a copy of Snow Leopard somewhere and create a boot disc, so I can boot from the disc and then run a disc repair.
Alternately, could I install Lion and resolve the issue, or would the underlying corrupted files remain? (When I run fsck -fy, it detects multiple threads but can't repair the issue)
Any help or insight would be appreciated
Thanks
Mike
I also have this problem which has gone from bad to worse. I bought a new installation disc now I cannot use the computer at all. It states I can not iinstall...I cannot repair ....
Similar Messages
-
I have installed the most recent version of Snow Leopard on my MAC, and I am trying to install Mountain Lion from the Apple Store. It will not install, because it says I do not have 2GB of memory, even though I have over 200GB available. Please help.
Welcome to the Apple Support Communities
One thing is the memory, and another thing is the hard disk space. You are telling me that you have 200 GB of free space on the hard disk, but the App Store is telling you that you have to install 2 GB of memory or more on your Mac if you want to upgrade to OS X Mountain Lion.
First of all, open > About this Mac > More Info, and copy "Model Identifier" here, so we can know what Mac you have got and how much memory you can install.
We recommend to buy the memory in OWC or Crucial (Crucial is cheaper and offers the same compatibility warranty as OWC) because you won't probably have any problem with the memory you buy there -
My imac is currently running mac os x 10.5.8. I've tried to install mac osx snow leopard 10.6.3, but have been unsuccesful because the disc fails to install.
What could be the problem?noondaywitch wrote:
You should boot from the Installer DVD by holding down the C key during start up until the Apple logo and spinning cog wheel appears. Allow plenty of time for the installer to appear - it can take several minutes when booting from a disc.
I suggest not doing this unless the Apple recommended method (starting by double-clicking on the
Install Mac OS X icon while booted up normally) fails.
There are several reasons for this:
The Apple method performs a check of the DVD's integrity before starting up from it. This can't be done if you start up directly from the DVD.
The Apple method "phones home" using the current OS's network settings to check for updates to the incompatible items database included on the DVD & writes a lot of pre-install data (the 'Mac OS X Install Data' stuff) to the HD before restarting automatically from the DVD to finish the installation. This may not work as expected if you start up directly from the DVD.
The pre-install data on the HD speeds up the installation process (because running the OS from the HD to build the data is faster than doing that while running from a DVD).
The Apple method makes it possible to "gracefully" cancel the installation before the automatic restart occurs without leaving the existing OS on the HD in a corrupted, "half-installed" state unable to restart the Mac. This sometimes happens if the installation process hangs & one has to force-restart the Mac to recover. As long as this occurs during the "pre-install phase" before the restart, the existing OS should remain untouched & intact.
Also note that the Snow Leopard installer is quite a bit more sophisticated than the previous ones like for Leopard or Tiger. It automatically performs the equivalent of Disk Utility's Verify Disk step before beginning the installation & performs more checks during the installation process (including checking the pre-install data for errors). It is usually not necessary to remove the "Mac OS X Install Data" folder after a failed installation, which may just cause the process to take longer on subsequent attempts, but if nothing else helps it is certainly something worth trying. -
I was told to reinstall Snow leopard which I did . More troubles! It then came up cannot iinstall as there are errors. Tried going into disc utilities and repair but once again it stated iin red I cannot proceed. can anyone help me here. Before this was happening my system was slowing right down with the beach ball making an apearance after tapping the mouse or typing text.
So you are trying to reinstall Snow Leopard?
In order to do that, you need to erase your hard drive - you cannot go back to an earlier system without erasing. Make sure you back up your files first. Then insert the Snow Leopard install disk, and restart while holding down the C key. If that does not work, insert the install disk, go to System Preferences > Startup Disk and highlight the install disk > click on restart.
Once you are booted into the install disk, go past the language selection and then to Utilities in the menu bar. Use Disk Utility to repair the drive (just in case), erase it and then install. After that, eject the disk and update to the latest 10.6.8. -
I've forgotten my administrator password for my macbook pro and don't have the original OS X disc; I do have the OS X disc for my iMac. Can I use this to reset the password?
You have nothing to loose by trying it.
I doubt it will boot but try it anyhow.
You will need to contact Apple for replacement install disks.
Contacting Apple for support and service -
How much is it to upgrade form Snow Leopard to Mountain Lion and can it be done in one hit?
How much is it to upgrade form Snow Leopard to Mountain Lion and can it be done in one hit?
Run Software Update to download and install the latest updates for Snow Leopard.
You should now see the App Store icon, and you now need to set up your account:
http://support.apple.com/kb/HT4479
To use iCloud you have to upgrade at least to Lion, but some functions are only available in Mountain Lion:
http://support.apple.com/kb/HT4759
You can also purchase the code to use to download Lion (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard), or you can purchase Mountain Lion from the App Store - if you can run that:
http://www.apple.com/osx/specs/ -
I am locked out of my computer and i do not know the password or have the installation disc
i have been locked out of my computer. i don't remember the password nor do i have the install disc needed to reset the password.
What iPod model do you have?
Identifying iPod models
B-rock -
I have a mac book pro that i bought in late 2009. My current software is snow leopard version 10.5.8. I would like to get the new lion operating system but I cant without first getting the latest version of snow leopard. however when I go to update my software it doesnt show that any update is available.
10.5.8 is Leopard, not Snow Leopard. You need the Snow Leopard DVD;
You can get it only by phone now from Apple.
In the US, call 1-800-MY-APPLE and ask for a sales assistant. Last quoted price was $19.99 for the single-user and $29.99 for the family licence.
For other countries, check here; http://support.apple.com/kb/HE57
Don't forget to ask for Sales; the tech support guys can't help.
If you want Lion, rather than Mountain Lion, the same Sales team can give you a download code to use at the Mac AppStore.
To get the App Store, you need to update your new Snow Leopard from 10.6.3 (which is the version on the installer) to 10.6.8 with the combo update; http://support.apple.com/kb/DL1399
Be warned that the upgrades will render a lot of older software unusable, and will need new drivers for printers and scanners in all likelihood. -
I have just installed Snow Leopard 10.6.3 and want to update my Safari 4.0.4 to the latest version. However, the latest Safari version needs at least Snow Leopard 10.6.8. What can I do, please?
Go to the Apple Icon, Top Left of your Screen and Run Software Update...
Or go here > http://support.apple.com/kb/DL1399
and download and Install the 10 6 8 Combo Update...
Be sure to Restart your Mac after the Install. -
I am running Snow Leopard on my iMac and have partitioned my hard drive to run Windows XP. If I upgrade to Yosemite, will I still be able to run XP?
bobfromnorth battleford wrote:
...Now what happens if I upgrade to Yosemite on either my iMac or my MBPro?
If I install VM Fusion or Parallels, does Windows run all the time? How does that affect computer performance? and how much do I need to worry about hard drive corruption?
Current versions of Fusion and Parallels are compatible with Yosemite. Both are applications which you only run when you want to run Windows within them. As such, there's no effect on computer performance when they're not in use. Like any other software, there is some additional load on your Mac when both Windows and the Mac OS are running together, but any noticeable effect depends on what each is being expected to do and what resources (e.g. available RAM and the number of CPU cores) you can devote to each.
I think there's less chance of HD corruption with a VM than there is with running Windows natively on the Mac in Boot Camp. Consider that, with a VM, you can create Snapshots of the state of your VM at a given time, and then, if something goes wrong (virus, malware, software installations), you can simply restore the Snapshot in a matter of seconds and eliminate the problems in the process. Moreover you can make a backup copy of the entire VM file, and replace a later version if you wish. Also consider that you can assign, say, 100GB of HD space to the VM, but the actual space devoted to the VM is only what's actually used; as more is needed, more is made available and Windows can't tell the difference. So, for example, my Win 7 Pro VM has an 80 GB virtual HD but only takes up 45 GB on my SSD, and that's with XP Mode in VPC installed inside it.
Microsoft no longer supports XP, though virus signature updates are still being issued. But MS has installed a pop-up message about EOL that won't go away (it's installed with KB2934207). Even if you remove that KB in Add and Remove Software, the pop-up continues. But if you have a Snapshot or a backup which is prior to it's original installation, you can skip installing KB2934207, and suppress it's reappearance on a Software Update list. -
Microsoft Office 2004 (Word) unable to save files
I have been running Office 2004 on my Intel iMac with Snow Leopard for some time and all of a sudden I cannot save a document. Word just stopped responding and I have to force quit. I can open Word and create a new document but I cannot save it. I reinstalled Word but that didn’t help. Then went to the Internet and found at least one other Mac user having the same problem which it suggests is caused by a recent Mac Security Update:
http://answers.microsoft.com/en-us/mac/forum/macoffice2004-macword/word-2004-wil l-not-open-or-save-documents/b04eb870-9b0d-4f3b-bb47-b122301e36f6
So I check for a new Mac Security Update and sure enough there was one. I downloaded it and now Word seems to be working, as it should. I can both open and save files. The only problem remaining is that when I open Word I get the following error message “An unexpected error occurred while trying to load the Microsoft Framework library”. I contacted Apple but they were unable to help.
How can I get rid of this error message?Look, I realize you might have to get your machine working, so this is how you revert back.
Restore proceedure to pre-Security Update 2012-001 v 1.0 & v 1.1
#1 Backup your personal data off the machine.
Backup files off the computer (not to TimeMachine). If you don't have a external drive, get one and connect to the USB/Firewire port and simply drag and drop copy your User folder to the external drive, it will copy all your files. It's best to have two backups of your data off the machine when trying to restore.
Disconnect all drives now to prevent any mistakes from occuring.
#2 Reinstall OS X 10.6 from disk
Get out your 10.6 install disk and make sure it's clean and polished (very soft cloth and a bit of rubbing alcohol, no scratches) If your disk is borked, you'll have to order a new one from Apple with your serial number.
Hold c boot off the 10.6 disk (wired keyboard, internal optical drive), use Disk Utility First Aid to >Repair Disk of your internal drive (do not format or erase!!), Quit DU and simply re-install 10.6.
Note: Simply reinstalling 10.6 version from disk (without erasing the drive) only replaces 10.6.8 with 10.6.x and bundled Apple programs, won't touch your files (backup anyway) or most programs, unless they installed a kext file into OS X itself. (only a few on average do this)
#3 Update to 10.6.8 without Security Update 2012-001 v1.0 or v1.1
Reboot and log in, update to 10.6.8 via Software Update, but EXCLUDE THE Security Update 2012-001 by checkinig the details and unchecking the blue check box.
#4 Reinstall any non-working third party programs
When you reboot, make sure to reinstall any programs that require kext files installed into OS X, you'll know, they won't work when you launch them or hang for some reason as they are missing the part they installed into OS X.
If for some freakish reason you get gray screen at any time when booting (possible it might occur when you reinstall older programs), hold the shift key down while booting (Safe Mode, disables kext files) and update your installed third party software so it's compatible with 10.6.8.
https://support.apple.com/kb/TS2570
That's it really. -
I purchased Lion 10.7 on Christmas Day, I received my redemption code a week later. I've tried to download Lion to no avail. I've been in contact with Apple Support and they haven't been much help so far. My computer is currently running Snow Leopart 10.6.8 - however, I received Photoshop Elements for Christmas and I need at least 10.7 in order to run the program. Nothing is working. Before commenting - I CANNOT install Mavericks because it'll mess up the versions of Filemaker Pro and Quicken that I use regularly. I tried installing Mountain Lion, at the suggestion of Apple Support but I need to be running at least 10.8 in order to install that. What do I do? I don't want to have to be pushed into buying another computer when this one works just fine - but I'd like to be able to run Photoshop Elements. Apple has charged my credit card for the purchase of Lion and yet it won't install and I don't know what to do now.
elly903 wrote:
Before commenting - I CANNOT install Mavericks because it'll mess up the versions of Filemaker Pro and Quicken that I use regularly...
Quicken 2007 for Intel (Snow Leopard, Lion, Mt. Lion and Mavericks) for $15:
http://quicken.intuit.com/personal-finance-software/quicken-2007-osx-lion.jsp
It will input your Quicken PPC data file directly if it was Quicken 2005 through 2007. If older you need Quicken 2006 or 2007 PPC first to convert your data file; and this update must be done BEFORE you upgrade to Mavericks:
http://quicken.intuit.com/support/help/patching/quicken-2006-manual-updates--mac -/GEN82200.html
Filemaker Pro PPC (in this case 7) running in Snow Leopard Server installed into Parallels for use in Lion, Mt. Lion and Mavericks:
[click on image to enlarge]
Snow Leopard Server: 1.800.MYAPPLE (1.800.692.7753) - Apple Part Number: MC588Z/A (telephone orders only)
This solution allows you to run your Photoshop Elements in Mavericks concurrently with Filemaker Pro PPC. Mavericks is a free download. -
How do I upgrade my Core2Duo Mini OSX10.4.11 to the latest version of Snow Leopard?
How do I upgrade my Core2Duo Mini OSX10.4.11 to the latest version of Snow Leopard?
I am aware I should upgrade from 1GB to 2GB of RAM. Can I just purchase the Snow Leopard DVD and install from that? Will I be able to run my Microsoft Office 2004 suite? Is it worth doing? I can't run any decent browsers with this old dinosaur.....but I'd rather not cough up $600 clams for a new one....
I have 7GB available on my hard drive.
Thanks in advance for help with this.You may also want to upgrade the HD or at least move large libraries onto external disks (since a macmini generally does not move like a laptop an external disk is just another desktop item). 7 GB free will be chewed into hard by SL and you should always have 15-20 GB free to allow OSX room to perform normal operations.
-
Hi,
I need to use some Japanese software which have to be installed on a computer running Japanese Windows OS in order for them to work properly. My macbook was purchased in Canada, meaning running English version of Snow Leopard. Is such thing possible?
Thanks!dofleini wrote:
My macbook was purchased in Canada, meaning running English version of Snow Leopard.
The language of your Snow Leopard has nothing to do with whatever version of Windows you want to run, which you will have to do via Bootcamp or one of the virtual apps like Fusion or Parallels.
If you do want to change the language of your Snow Leopard, it can be done in a few seconds by moving a different language to the top of the list in system prefs/language & text/language and then logout/login. -
What version of iLife works with Snow Leopard 10.6.8, and where can I buy it?
What version of iLife works with Snow Leopard 10.6.8, and where can I buy it?
Welcome to Apple Support Communities
You can install the latest version, iLife '11. It's available at the Mac App Store, but the versions available there aren't compatible with Mac OS X Snow Leopard, so you have to get iLife '11 on a DVD at eBay or Amazon > http://www.amazon.com/Apple-MC623Z-A-iLife-VERSION/dp/B003XKRZES
After installing it, open > Software Update, and install the most recent version for Snow Leopard
Maybe you are looking for
-
I AM SWITCHING TO A MBP FOR GRAD SCHOOL & TO REPLACE MY DEAD DELL.
(I should say I am using a brother's mac now so anything that you see in the area of personal profile stuff, is not mine. There is nothing that should be about me or my computer.) Hey- I thank you for at least attempting to see what it is I am needin
-
Unable to download Itunes - get the message 'unknown publisher' followed by the following error message - 'C:\documents & settings\owner\local settings\temporary internetfiles\content IES\1LKLCFM9\itunes set up (1).exe is not a valid win 32 applicati
-
Hi all , I am using resuse alv list display , i am getting the grand total using the do_sums = 'X' , but not able to get the subtotal of quantities and value for some customer . pls help and suggest how to get the subtotals. thanks in advance, vivek
-
I converted the FCP project to "MPEG-2" in Compressor like a lot of you recommended. The video played well, but there was no sound. Did it not convert audio? How can I include the audio? What setting do I have to use in Compressor so I can convert my
-
When-validate-item fires at the wrong time?
Hi, I have a custom form that contains a header block and line block. Once I enter the header info, then I enter the first line that contains transaction num and amount fields. Then I hit down-arrow to go to enter the second line, at this point when-