I have a CQ57 QE 321UA#ABA VISION AMD processor
I would like to upgrade to a higher processor, how much higher can I go without any other changes to the system or is it possible?
Hi:
Below is the link to the service manual for your notebook.
http://h10032.www1.hp.com/ctg/Manual/c02948186.pdf
You can upgrade to one of the supported AMD processors listed in chapter 1, page 1.
Paul
Similar Messages
-
I have a newer MacBook Pro with an AMD processor. It is my understanding that Parallels can only be used on Mac's with Intel Processors. Is that true and if so does anyone have recommendations about how to have a windows side to my Mac
Then it either is a pirate clone or you are misinformed.
Apple Computer has never used AMD processors in its products.
However, the Graphics Processing Unit (GPU) is a Radeon unit, which is an AMD subsidiary. Parallels, VMWare, VirtualBox will all work fine with the Intel Core i7 or i5 CPU that powers the Mac, and use the AMD Radeon GPU that drives the displays. -
NOTEBOOK PC WITH VISION AMD PROCESSOR
Purchased the above PC in July 2010 from Best Buy. I did not take the extended warranty when it was offered in July 2011. Here we are in July 2012 and the Best Buy Geek Squad folks tell me that I should replace this computer as it is overheating and that the AMD processor is known to do this!!!!! Repair cost 350.00 for a 399.00 purchase?????? !!!!!!!!!! I am so surprised THAT something of this nature would not last last more than 2 years. My expectation was that I would have to get a new before in 5 years because of outdated programming. My husband has a 5 year old Dell with no problems. I AM VERY DISAPPOINTED AND NOT IMPRESSED WITH HP NOTEBOOK AT THIS POINT.
Yes, I have cleaned the dust out of the fan area a few times.
Is there another alternative to keep my computer cool without costing me a lot of $$$.
Even better although the warranty has expired it would be GREAT if HP showed some good faith and fixed this gratis.Yeah that would be nice for HP to fix it gratis but it is not likely to happen. What needs to be done is to disassemble the laptop and replace the cooling compound between the processor and heatsink. It is not really an amateur job but can be done by a local repair shop for more like $100 or theoretically it can be done for free by the end user who is careful and good with a screwdriver. Best Buy is not a good place to go for this type of repair since they have to send the unit out to someone else and still take a cut of the proceeds.Even with that $350 is bordering on criminal. I can do it in two hours and for $350 I would be making almost what I charge as a lawyer.
There are even places on eBay which will have you send the laptop to them in a box, fix it and send it back for around $100. Let us know if you have any more questions. Keep in mind we do not work for HP we are all just end users like you so don't shoot the messenger. -
Hp pavilion g6 , vision A8(AMD) processor
my laptop model is hp pavilion g6 , vision A8(AMD) processor. I brought it on Augest 2013. A few days back I got a message in the laptop when i turned it on. It was like ''The cooling fan is not operating properly. Continued opeation may result in data loss or, system damage. Your system will automatically shutdown in 15 seconds.To continue operation press ENTER.System fan error-90B. visit page www.hp.com/go/techcenter/startup
My laptop cooling fan is not working.heat wa probucing but it was not so much. The message i have told above is not frequently.Up to now i got that msg for 4 time with in gap of 25 days.After showing this msg the system was automatically shutdowning and if i again started the message wont appears. so, it is difficult for me to show the service centres .plz help me...
This question was solved.
View Solution.Hello radha-achanta,
I understand you are looking to register for HP Customer Care, but the link is not working correctly. I think it would be best if you contact HP Technical Support to your registration done.
I would like to thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter -
I have a HP Pavillion all-in-one with AMD processor running Windows 8.1 64 bit. Flash Player 16.0.0.235 with all current drivers. I'm consistantly experiencing a green sceen on all Flash Player videos but I have sound.
[discussion moved to Using Flash Player forum]
-
I have a 2008 vintage iMac with 2.8GHz processor and recently upgraded to OS X 10.9.5. Soon after theupgrade the mail system started switching the senders address to another address, but same user name. How do you fix this?
Thanks for the reply,. I went to the site provided and executed the directions but this did not solve the issue.
Even more details:
If I send a message to the Jane Doe address from another account on this machine (all my family uses the same email services provider and each have accounts set up on this machine), when you open it, it shows Jane Doe then the <applejax.xx> address AND the picture associated with the Apple Jax account.
So the problem shows up when the message is sent to this account from this machine, AND when it is sent from this machine from this account. No other accounts on the machine are effected.
I have sent and received email messages from the mail service provider's website, and everything is fine. -
My home envirornment is an older Mini Mac running 10.5.8 with a PowerPC G4 processor ( I know, it's old). I also use an iPhone 3S, accessing my mac mail account. Do I have to upgrade my computer to a faster processor to use iCloud?
Hello,
You can't upgrade to any faster, & especially not to an Intel CPU needed to run Lion/10.7 for full iCloud usage.
You can have limited use of iCloud the way it is, you can view all of iCloud in a Browser, You can use Find my Phone I hear, & you can use IMAP Mail for syncing, but no other syncing.
iCloud Mail setup...
IMAP (Incoming Mail Server) information:
Server name: imap.mail.me.com
SSL Required: Yes
Port: 993
Username: [email protected] (use your @me.com address from your iCloud account)
Password: Your iCloud password
SMTP (outgoing mail server) information:
Server name: smtp.mail.me.com
SSL Required: Yes
Port: 587
SMTP Authentication Required: Yes
Username: [email protected] (use your @me.com address from your iCloud account)
Password: Your iCloud password -
I have a Mac OS X 10.6.8 Processor 2.8 GHz Intel Cor i5 does it have and intel chip or PowerPC processor? The example given to have this chip was an i7 not sure if that is necisary or if the "intel core" is what is required.
The word Intel means that it has an Intel CPU.
(96645) -
I have a Windows 7 notebook. It runs on an AMD processor. Will Firefox get installed on this system
I have a notebook that runs on Windows 7 Home basic Operating system. The processor is a an AMD processor. Will Firefox work on this notebook if I install it.
Yes.
* getfirefox.com -
I am having some problems with downloading, possibly settings are incorrect, esp. flashplayer upgrade will not install - i have iMac 8.1 osx v10.5.8 - processor: 3.06 ghz intel core2 duo mem: 2 gb 800 mhz ddr2 sdram - i am considering making an appt with Apple store nearby since we have a few in vicinity but thought i would give the online support a try.
The latest version of Adobe FlashPlayer can be obtained from here:
http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFl ash
You can check here what version of Flash player you actually have installed: http://kb2.adobe.com/cps/155/tn_15507.html
You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS.
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/909/cpsid_90906.html
and also that you follow the instructions closely, such as closing ALL applications first before installing. You must also carry out a permission repair after installing anything from Adobe. -
How can I tell if I have an i7 dual core or quad core processor?
I just got my brand new (2011 refurbished) MacBook Pro yesterday and it is slow and choppy right out of the box. I checked the "About This Mac" screen and it says I have the "2.2 GHz Intel Core i7". It says nothing about "dual core" or "quad core". I thought I was buying a quad core, but now I'm starting to wonder exactly what I bought.
Does anyone have any insight on this?
Thanks,
Matt
Chicago, ILYou have a quad core.
Number of Cores: 4
Regards,
Captfred -
I have a HP Pavilion p6710f with an AMD Athlon Quad-Core processor takes 10 to 12 minutes to boot
I have a refurbished HP Pavilion p6710f desktop, with an AMD Quad-Core processor. About 4 weeks aog I reformated the HD and reinstalled Windows 7 Prof and the rest o my software and it ran fine for about 2 weeks then it started taking 5 to 10 minutes to boot up in morning or to restart. I had downloaded a couple of things and I uninstalled them and it did better, but gradually over the last week it has started taking 10 to 15 minutes to boot up or restart. With either it takes a few seconds to get the HP stuff in the middle of the monitor, then in a few seconds it loads the choices (Function keys for setup, recover, etc.) then it takes 4 to five minutes to show "windows loading" the 3 to 4 minutes to show the 4-colored windows logo and then up to 5 minutes to load my icons and be ready to run--once all this is done everything runs fine until I need to restart, and then it is 10 to 15 minutes again to get up and running.
When I redid everything about 4 weeks ago I made an image on an external 1 Tb HD that is always connected thru a UBB Port and this morning I recovered and It reinstalled it, but it did not help.
Don't think it is the BIOS battery as it doesn't lose time.
Hope someone can help me
drp6149Seems to me that your hard drive is gonna fail soon, trying running hard drive diagnostics from the BIOS.
HP Elite h8-1070T Intel Core i7 2600 12GB RAM AMD Radeon HD 6850 1GB Windows 8 Professional 64-bit (Gaming)
HP DC7900CMT Intel Core 2 Duo 3Ghz 4GB RAM Windows 8 Professional 64-bit (Workstation)
HP XW4200 Intel Pentium 4 HT 3.6GHz 4GB RAM Windows XP Professional (Home File Server) -
I have mac book OS X 10.4.11 model No.A1181 (processor 2 GHZ Intel Core 2 Duo and memory 2 GB 667 MHz DDR2 SDRAM). To which newer version can I update and how?
Welcome to the Apple Support Communities
You can upgrade to Mac OS X Snow Leopard, and then, you should be able to use OS X Lion.
First, buy Snow Leopard > http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard Then, make a backup of your data, insert the Snow Leopard disc and upgrade to Snow Leopard.
The disc will install Mac OS X 10.6.3, so open > Software Update to install 10.6.8, the most recent Snow Leopard version.
See if your Mac is supported > http://support.apple.com/kb/HT4949 If you see that it's compatible, call Apple to buy OS X Lion > http://support.apple.com/kb/HE57 Also, check if your apps are compatible > http://www.roaringapps.com -
hello.
safari does not open me, that leaves unexpectedly closed. but it is always so. No matter if you reboot the laptop. help please.
how do I remove Safari and reinstall it because when I go to delete the application from the finder, goes that you can not perform this action because OS X does not leave.
There leave something that leaves me open to give the safari:
Process: Safari [704]
Path: /Applications/Safari.app/Contents/MacOS/Safari
Identifier: com.apple.Safari
Version: 7.0.2 (9537.74.9)
Build Info: WebBrowser-7537074009000000~3
Code Type: X86-64 (Native)
Parent Process: launchd [143]
Responsible: Safari [704]
User ID: 501
Date/Time: 2014-03-24 21:42:17.094 -0500
OS Version: Mac OS X 10.9.2 (13C64)
Report Version: 11
Anonymous UUID: 8151A932-FF73-155E-135A-1ECFBF824217
Sleep/Wake UUID: 8A361AC7-3227-463F-A0D8-A245BB1474E4
Crashed Thread: 14
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: EXC_I386_GPFLT
Thread 0:: Dispatch queue: com.apple.main-thread
0 libobjc.A.dylib 0x000000011294a3b5 lookUpImpOrForward + 523
1 libobjc.A.dylib 0x000000011294a198 lookUpImpOrNil + 20
2 libobjc.A.dylib 0x000000011293f919 class_getMethodImplementation + 40
3 com.apple.AppKit 0x0000000113ea589f _NSSubclassOverridesSelector + 38
4 com.apple.AppKit 0x0000000113ea578f _NSLogOverriddenIdentifierForObject + 68
5 com.apple.AppKit 0x0000000113eca5e4 -[NSView setUserInterfaceItemIdentifier:] + 541. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a few minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD com.evenflow.dropbox com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"[$((l-25)) more line(s)]"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/(\/Users\/)[^/]+/\1-/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed -n 's/^ *//;5p;6p;8p'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps "Model"; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]|0[^2]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in FireWire Thunderbolt USB; do o=`SP $b | sed -En '/:$/{s/ *:$//;x;s/\n//;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};/Apple|Broadcom|Genesy|Intel|SMSC/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; fdesetup status | grep -q On && o=on || o=; Ps "FileVault"; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n\t* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caug|GPU |hfs: Ru|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN' -k Message Ane 'SMC:' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|openld|post[fg]|x)/{print $3}'`; Pm "Extrinsic daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | egrep -v 'com\.apple\.(CSConfig|server)' | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; [[ "$b" && "$l" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do test -f "$d/Info.plist" || continue; ID=$($PB\ :CFBundleIdentifier "$_") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Extrinsic shared libraries"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Inserted dylibs"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^\(.+\) //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{printf "not "; exit}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print}; /v6:/{if ($2 !~ "A") print}'`; Pm "TCP/IP"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc "hosts" <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "Application check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l`; Ps "Restricted user files"; cd; o=`find . -maxdepth 1 -exec basename {} + | while read f; do [[ ("$f" =~ ^\.. && ! "$f" =~ ^\.(adobe|android|bash.+|CFU.+|cache|config|cups|dropbox|DS_Store|font.+|git.+|profile|rnd|sh_.+|ssh|subv.+|Trash(es)?|zprofile|zsh.+)$) || ($(stat -f%f "$f") -ge 32768 && "$f" != Library) ]] && ls -Fd "$f"; done`; Pm "Hidden user files"; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps "UID"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Adjusting screen brightness on HP 8.1 E2 Vision AMD (no tag with model,etc)
I purchased my HP 8.1 about 18 months ago. The screen brightness has been fine before now. It is not an 8.1 update.
Within the last week, I've noticed that the screen is not nearly as bright as before.Hi @kantoon ,
Welcome to the HP Forums!
It is a terrific place to find answers and tips!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I understand that you purchased your notebook 18 months ago. You have not had any previous issues with the screen brightness but last week you noticed it is not as bright as before. You stated that it is not a Windows 8.1 update.
Here is a link to Troubleshooting a dim display (Windows 8, Windows 7 and Windows Vista) that wil guide you through some troubleshooting steps.
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!
Maybe you are looking for
-
Print layout designer for develop report based on query
Dear Experts/Gurus, I am amazing about the manage previous reconciliation report. When I opened it using print layout designer, it looks like the report is not built using query, but I am not sure yet. This is very confusing. I created query similar
-
Bit Locker encription Problem not showing in my control panel
i am using windows 7 64 home premium in my control panel Bit Locker encription driver is not showing please guide me how i will about how this driver will show in my control panel
-
SBlive 5.1 Digital, Drivers wont install. I've tried everything
Hey, Guess I'll try my luck here I have a SoundBlaster Li've 5. Digital card. Model # SB0220. I lost the install CD, but I was able to download a copy of the install CD. I recently wiped my dri've because I was getting hit up with adware and stuff (I
-
i have a linked list and i am adding to it all the time. The list holds objects that contain a string and a int. When i add an object i want to check to see if an object already exists with the same value in the string. If there is i increment the in
-
TS1702 How can I return the app that I bought for my iPhone4S almost three months ago.
How can I return the app I bought almost 3 months ago? Is this to late to return??