I have a custom template. When I edit it and try to save it asks me to name it and then I end up with an additional custom template. How do I edit the template and save the changes without creating another template?

Hi Atrec,
If you don't need your old custom template, save your changes with the same template name. It will tell you that this template exists and will ask you Replace? Say yes (if you do want to replace the old with the new!)
To delete unwanted templates, go to Finder > Menu > Go and press the option key. Your Library will show in the Go Menu. Navigate to Library > Application Support > iWork > Numbers > Templates > My Templates.
Delete any unwanted template by dragging it to the Trash or click on it then command-delete.
Having gone to all that trouble to find My Templates folder, right click (or control click) on it and Make Alias. Drag the Alias to any convenient place for a quick way to get back to that folder.
Regards,
Ian.

Similar Messages

I opened a Sync account before, and without saving the code I uninstalled it. But now using installed it again but do not have my Sync code to add the device. Is there anyway I can retrieve the code, without creating another account? Thanks!

I created a Sync account before but uninstalled it without saving the code. But now installed it again and having trouble finding my account code to setup my Sync. Is there a way to retrieve my Sync code without creating another account?
Thanks!

Contact iTunes:
Apple - Support - iTunes - Contact Us

HT204074 Our new iphone5 id name is the same as an existing still in use iphone4 in the family; if I remove the devise; change its name can I then immediately associate it with the correct name.

I have read the HT4627 but I think my original question is more specific Our new iphone5 id name is the same as an existing still in use iphone4 in the family; if I remove the devise; change its name can I then immediately associate it with the correct name.

You can change the name of a device on it via Settings > General > About > Name - you shouldn't need to remove the association and then reassociate it.

My daughter has been using my iTunes account to buy music and apps. I now want to set up a separate iTunes account for her, with a different login. How can we transfer the music and apps she has already bought to her new iTunes account?

My daughter has been using my iTunes account to buy music and apps. I now want to set up a separate iTunes account for her, with a different login. How can we transfer the music and apps she has already bought to her new iTunes account?

Hello, thank you for your prompt answer. I did have an idea that Home sharing might be the answer but could not quite figure out how to do it. I have enabled home sharing in my iTunes account, put in username and password, clicked on creat etc. But the homs sharing icon doew not appear in the left side of iTunes. So I got stuck. Any further ideas?

I have forgotten my appleID password and the email it is linked to is deactivated, security questions aren't working. This is on my iPhone and iTunes acs so I can't sync with my new computer. How do I merge AppleID accounts and shut down the old one?

I have forgotten my appleID password and the email it is linked to is deactivated, security questions aren't working. This is on my iPhone and iTunes acs so I can't sync with my new computer. How do I merge AppleID accounts and shut down the old one (when I have no password and the security questions aren't working?)

You cannot merge Apple ID accounts, that has never been supported.
You can contact the Apple ID Security folks per the listing in http://support.apple.com/kb/HT5699 and they can help reset security questions and get the account working.

I was trying to download my itunes to my iphone and did a restore by mistake. Now all my contacts, pictures etc are gone from april to now. How can I revert my iphone back to the way it was

I was trying to download my itunes to my iphone and did a restore by mistake. Now all my contacts, pictures etc are gone from april to now. How can I revert my iphone back to the way it was

- You do have iTunes version 11 on the computer, right. Saying the latest is not sufficient.
- Have you tried everthing here:
iOS: Device not recognized in iTunes for Windows
- You should
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Your library/media will not be affected.
- Does the iPod charge?

Our Band purchased Logic Pro and it was loaded to one member's Macbook Pro. Unfortunately, he passed away with cancer in May. How can we transfer the ownership and the software (it was downloaded) to a new user's Macbook?

Our Band purchased Logic Pro and it was loaded to one member's Macbook Pro. Unfortunately, he passed away with cancer in May. How can we transfer the ownership and the software (it was downloaded) to a new user's Macbook?

Hi Kurt,
The Mac IIci is not even powering on at all. Tried again with wih a tested power cable and no luck.
I think it's best that take this issue to the Older Hardware Community. Not only did I see a fair number of replacement parts for the IIci avaiable online, but there also vintage external floppy drives as well. I'm not giving up.
Thank you for your time and interest in helping.

HT203254 and in case my computer is out of 4 years period?? (for just a month) do you know how much it would be cost to replace the board?

and in case my computer is out of 4 years period?? (for just a month) do you know how much it would be cost to replace the board?

If the NVIDIA graphics processor in your MacBook Pro has failed, or fails within four years of the original date of purchase, a repair will be done free of charge, even if your MacBook Pro is out of warranty.
That's what it says, mine did too and was out of date. when Lion killed it.
Don't bother fixing it, it's a 4 year old machine and at it's end of life anyway, something else will just die on it, like the keyboard, the superdrive, the hard drive etc etc.
Wth all the money you'll spend fixing it, you could have a new machine.
Mac' laptops only last aobut 4 years with daily use now.

I Have iPad4 and using with Aricel Prepaid 3G SIM, How to check my VAlidity period and balance amount through iPad?. pls help me

I Have iPad4 and using with Aricel Prepaid 3G SIM, How to check my VAlidity period and balance amount through iPad?. pls help me, M.Kumar, Chennai,
<Email Edited By Host>

There are 2 concepts attached to a bank balance. The balance as per your books of accounts and another is the balance maintained with the bank. I believe i need not explain these 2 concepts. These 2 balances can be obtained from Oracle system provided some of prerequsities are met with.
Balance as per your books - This is nothing but the GL balance available. In order to obtain balances for each bank accounts, it is advised that each bank account should have a separate account code combination. This is achieved generally by having a separate natural account for each bank. The code combination is attached to the cahs account for each bank. By maintaining separate account code combination, the balance in each code combination can be obtained from GL (provided transactions are accounted and posted in GL). These balances represent the balance for each bank according to your books of accounts. You can create an FSG for this purpose and provide the same to the customer, so that they can run the same whenevr they want.
Balance as per bank - This balance is maintained by oracle in 2 ways - either the bank balance can be manually entered for each bank account for each date (quite cumbersome). Else, while loading the bank statement, the bank balances are also loaded. There are various types of bank balances stored - value dated balance, available balance, float balance etc. Depending on the balances provided by bank along with the bank statement, the bank balance can be recorded in oracle system. After the bank statement is uploaded and balances stored, standard cash management reports are available to query for the bank account balances. In order to view daily movement, the bank statement should be loaded on daily basis.
Hope this helps.
Vinit

I see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder

i see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder. I see that it means that it isn't reading the new hard drive.
did i miss a step between transferring all of my information from my old hard drive to the new hard drive and installing the new hard drive into the computer. I believe that i installed properly. it was quite easy.
thanks for your help

It means there is no bootable system on the drive. If you still have access to the old drive, then I suggest you boot from it then clone it to the new internal drive. Use OPTION boot to boot from the Recovery HD on the old drive:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     1. Select Disk Utility from the main menu then press the Continue
         button.
     2. Select the destination volume from the left side list.
     3. Click on the Restore tab in the DU main window.
     4. Select the destination volume from the left side list and drag it
         to the Destination entry field.
     5. Select the source volume from the left side list and drag it to
         the Source entry field.
     6. Double-check you got it right, then click on the Restore button.
Source means the external old drive. Destination means the new internal drive.

I have a new computer with windows 8.1. How do I reinstall Adobe elemnet and premire 10?

I have a new computer with windows 8.1. How do I reinstall Adobe elemnet and premire 10?

If you have the disks you use them to reinstall. If you need to download the programs, you can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
Photoshop/Premiere Elements 10:
http://prodesigntools.com/photoshop-elements-10-direct-download-links-pse-premiere-pre.htm l

Was setting up my ipad, turned it off. Came back turned it on and after you select ur country step it came up with "connect to itunes" logo, how do i fix this? And i dont have a computer.?!

Was setting up my ipad, turned it off. Came back turned it on and after you select ur country step it came up with "connect to itunes" logo, how do i fix this? And i dont have a computer.?!

Reboot the computer then try placing the iPod in Recovery mode and then restoring via iTunes.
Next try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

HT5988 I downloaded Mavericks and now my WD Smartware that I use for Time Machine is no longer compatible with this OSX version? How do I make that unit compatible? olefromca

I downloaded Mavericks and now my WD Smartware that I use for Time Machine is no longer compatible with this OSX version? How do I make that unit compatible? olefromca

I agree entirely, been messing with this since the upgrade to Mavericks but I didn't find it quite as easy as uninstalling the WD smartware as it still operates when you plug the drive back in - I think it gets loaded onto the drive and runs from within (?). The advice from WD was that time machine was faulty and I should contact Apple...thanks guys!
Anyway, for the OP's benefit, this is what I found:
1. My problem was that time machine couldn't see any further back than before the Mavericks install, but if I opened up and interrogated the WD drive, the old backups were still there.
2. When TM started doing new backups, it overwrote the ones that it could see, not the oldest ones on the drive. This indicated to
me that the WD software had somehow partitioned off the old backups and excluded that part of the drive from being overwritten. Of course, as the drive was practically full, it meant that any new backups wouldn't fit in the available space.....
3. The only way I could find to resolve this was to use the disc utility to erase and repartition the external drive. This will obviously remove all of the old files and backups, but I was more concerned about keeping a current profile as backup rather than a load of stuff from months ago.
4. Anyway, what happens after the eraseure has completed is that you get the WD icon on the desktop, and you're invited to install the software - this means the software has now been deleted. Juts don't reinstall it, just let TM do it's backup and all is well.
Usual disclaimers and warnings about keeping another copy of your system etc. obviously apply, and I know this is a radical move to delete all your old data but it worked for me. I guess I didn't appreciate that you could use the external drive without the software that came with it and just followed the screen guide.
I'm also aware that if you don't want to use TM to do a complete restore and only want to find one old version of a document, this is difficult. However, you can then install the WD software and find the file but you'll then have to do this all again.....

I have a used mac computer. I want to sync and update my iphone. Currently itunes tells me that my iphone is connected to a different itunes account. How do I make itunes sync and update my phone without deleting all the current information on my phone?

I have a used mac computer. I want to sync and update my iphone. Currently itunes tells me that my iphone is connected to a different itunes account and will sync, but delete everything from my phone. How do I make itunes sync and update my phone without deleting all the current information on my phone?

Iphone will sync with one and only one cpomptuer at a time. Syncing to another will erase the current content and replace with content from the new computer. This is the design of the iphone.
It will erase the content when you sync.
Why not update from the comptuer with which you normally sync?

Adobe plugin keeps crashing. I have rest as per the advice and have ended up with a new homepage view. how do i get the old one back

i rest firefox to solve adobe flash problem. I now have a new view to my homepage. On the old one youtube maps etc showed along the top of the page( not the toolbar) just at the top of the page. Now it is just google and nothing else.
Can i get the old view back
Mant thanks

Could you try disabling graphics hardware acceleration? Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps:
*Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
*In the Firefox options window click the ''Advanced'' tab, then select "General".
*In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
*Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
[[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
[[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
https://support.mozilla.org/en-US/kb/keep-flash-up-to-date-and-troubleshoot-problems
https://support.mozilla.org/en-US/kb/adobe-flash-plugin-has-crashed
http://forums.adobe.com/thread/1018071?tstart=0
http://blogs.adobe.com/asset/2012/06/inside-flash-player-protected-mode-for-firefox.html

I have a custom template. When I edit it and try to save it asks me to name it and then I end up with an additional custom template. How do I edit the template and save the changes without creating another template?

Similar Messages

Maybe you are looking for