I have a D-LInk router that has lost my network name and protection. How to I re-set it up?

THe protected network name is gone and now my computer just shows me connected to "dlink"
How do I re-set it to the protected network? I tried to use a "wizard" i found on the net but it said the emulator wouldn't work and to go back to the CD. I have no idea where the CD is

I got to the page but it did not seem to give me an option to do what I want. I could see how to reset the ROUTER ADMINISTRATION password (for which right now there is none) but there as nothing about setting up my network name and password, which was lost. Or is this the same thing as the router configuration password? (I was thinking that referred to a password that would allow me to change router settings)

Similar Messages

Table that has the hier text names and the corresponding hier ID

Hi,
Would anyone happen to know the table that has the hier name text as it appears from the infoObject level and the corresponding Internal hierarchy ID (unique ID) for data element RSHIEID. I would want ot be bale to match the text name o f the hier to the hier ID.
Thanks
Will

Trying to make it simpler taking the 0material hierarchy note that the 0material has been loaded with 3 different hierarchies:
fields in the H table:
HIEID - 434FLR9O6DX0XXJS3CLIYZODD (Refers to the particular hierarchy as mentioned I have 3 hierarchies loaded to 0Material)
OBJVERS - Active and so on
NODEID - 4 digit internal number of the hierarchy
These are the Keys that identifies the hierarchy uniquely in my case the 1st hierarchy.
Now if you want to find the nodes then based on the example above I will take the hierarchy id ie 434FLR9O6DX0XXJS3CLIYZODD for the field HIEID that would give me all the nodes of this hierarchy
Note: the HIEID for a particular hierarchy can be found from the HEADER info
Thanks,
Raj

I have a program named facemoods that has taken over my search and comes up on its own, can I get rid of it?

When I open Firefox it opens normally then a program named Facemoods Search inserts its self infront of Mozilla Firefox. Then it takes over the search bar. Can Facemoods be removed ?

See:
* [/questions/772061]

I have card reader that has a 3" disc.. and my computer isn't recognizing it? what can I do.?t won't recognize

i have kodak photo card reader that has a 3" disc.. and my computer isn't recognizing it? what can I do.?
it is Mac compatable but when i put it in the cd slot.. nothing happens

Contact iTune Support
http://www.apple.com/emea/support/itunes/contact.html

My Contacts File in Applications has lost all name and addresses - how can I retrieve them?

Out of the blue my Contacts File in Applications has lost all my names and addresses. Is there any way I can retrieve them? On my back-up systems they don't appear either. Panic!
Lecia

Hello again
Alothogh I could not find help on any of the Communities (that I could acyually understand) - I haven't a clue what I have just done but ALL my addresses have now shown up in Contacts. Wish I knew what I had 'clicked" to achieve this - but as I have been "clicking" just about everything in sight - I am not sure what did the magic trick.
Maybe, although I have answered my own query, someone could perhaps tell me what may have happened? I THINK it was something to do with iCloud --- which is something I don't understand AT ALL!
Cheers, Lecia
CHEER

I have a router that has a readyshare USB storage access port that has mp4's of movies. So how can I view them from my iPad 2 ?

I have a router that has a readyshare USB storage access port that has mp4's of movies. So how can I view them from my iPad 2 ?

I just bought a NETGEAR WNDR3400v2".
I own a mac, running 10.7 and an ipad 1.
I can access my USB stick, on the netgear wireless router, from my mac or ipad.
From a mac or ipad .... http://readyshare.routerlogin.net/shares/USB_Storage/ or just http://readyshare.routerlogin.net/shares
Also, on a mac only, try, go > connect to server> smb://readyshare
Works for me!

I have a 4yo MacBook Pro, that has a super-old version of Microsoft Word ('04?) on it. I upgraded to Mavericks. Now Word PowerPC apps are no longer supported. How do I change my default opener to Pages?

I have a 4yo MacBook Pro that has a super-old version of Microsoft Word ('04?). When I try to open a Word document, a note pops up saying that PowerPC apps are no longer supported. How do I change my default document opener to Pages?

Okbart wrote:
Can I safely send the Word Office icons and anything else related to it that shows up in spotlight to the trash?
You mean for Office apps? That, I don't know for sure as I don't use MS Office on my Mac. I would check to see if there is some sort of MS Office uninstaller that needs to be run before dragging the icons to Trash. Either from one of the Office apps Help or About or search the Internet for a solution.
EDIT: A quick Google search found this link which may help you.

We have a legacy Forms application that has

We have a legacy Forms application that has been moved to the web. Now that it is executing using OAS9i, we are now providing an ASP offering for clients. The application consists of 210 Forms 6i screens, 130 Report Writer 2.5/6i reports as well as 150 C batch programs producing text reports in the Unix environment.
Clients are now asking for the ability to list and examine online reports saved to the filesystem.
Has anyone created a method of listing and displaying reports saved to the filesystem? We have a Unix utility that can convert C program text output to the PDF format.
Any help is appreciated.

You might be able to do this without having to write a server-side java bean by doing the following:
web.show_document('http://webserver:port#/reports_dir');
if you just give the directory name and have no index.html in that directory then it should just give you a lisitng of the contents of the directory as links (all your reports that have been turned into PDF files) Your user could then click on the report they want and then the browser should be able to recognize the adobe file and display it without any forms code.
Hope this helps,
Candace Stover
Forms Product Management

I have an external hard drive that was formatted by a PC and has files and directories etc. I want to format it and use it on my IMAC for backup but I can't seem to write to it nor can I delete current content. How do I initialize it for use with the MAC?

I have an external hard drive that was formatted by a PC and has files and directories copied to it etc. I want to use it on my IMAC for backup. I see it on my my IMAC . I can open files etc. But I can't seem to write to it nor can I delete current content. I don't care if I lose current content. How do I initialize it for use with the MAC?

You can't write to it because it's formatted as NTFS which OS X will read but not write to. If you want to continue using the drive with both a PC and OS X you will need to download and install NTFS-3G so you can then write to it from your Mac. You can get NTFS-3G at:
http://www.macupdate.com/app/mac/24481/ntfs-3g
If you want to use the drive exclusively with your Mac then move the data off it and reformat it in Disk Utility (Applications - Utilities - Disk Utilities) as Mac OS Extended (Journaled.)

I have a linksys WRT54G router that we use as a base. I want to use Airplay using Airport Express and hook up my stereo to it. How can i set up my Airport express without a PC/laptop? I just downloaded Airport utility on my iphone and ipad,will that work?

I have a linksys WRT54G router that we use as a base. I want to use Airplay using Airport Express and hook up my stereo to it. How can i set up my Airport express without a PC/laptop? I just downloaded Airport utility on my iphone and ipad,will that work? And one more thing about the setup, the linksys router shich acts as a base is in a different room as the airport express which i wanted to use for airplay. So I'm hoping to hook up the Airport express via wireless signal. If i can set it up, can someone pls help me out by posting detailed instructions. Thanks so much!

The first message that AirPort Utility will display during the auto setup will be that the Express will be confgured to "extend" the network. When AirPort Utility analyzes the network further, and sees that the Express cannot "extend" the 3rd party network, the next message will indicate that the Express is being configured to "join" the wireless network.
Once the Express is configured, if you later go into AirPort Utility to check the settings under the Wireless tab, you will see that the Wireless Mode is indeed "Join a wireless network".

Please help , I have iPhone 4S and have updated to iso6, don't know if that has anything to do with the problem but I can't set the year on date and time to the correct year, it automatically goes to 2578 ? Plz help

Subject:
Please help , I have iPhone 4S and have updated to iso6, don't know if that has anything to do with the problem but I can't set the year on date and time to the correct year, it automatically goes to 2578 ? Plz help

Settings>General>International.
Set the calendar to "Gregorian". You have it set to Buddhist.

HT1206 I have an old apple id that has a number of songs on it that i want to transfer to my new apple id. it keeps asking me to authorize the old id but i have no password and the email is no longer. thanks

I have an old apple id that has a number of songs on it that i want to transfer to my new apple id. it keeps asking me to authorize the old id but i have no password and the email is no longer. thanks

All content from iTunes is tied to the account that bought/downloaded it, and it can't currently be transferred to a different account. If you don't know the account's password nor it's security questions (http://iforgot.apple.com), then you could try contacting iTunes support and see if they can help you get access to it : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

I have an Intel based iMac that has just developed two small spots on the screen. One 1/8" circle at bottom and a tiny circle at top. The fading on and off light isn't working anymore either. Does anyone know anything about this?

I have an Intel based iMac that has just developed two small spots on the screen - they look light brighter spots on the screen. One 1/8" circle at bottom right and a tiny circle at top right. The fading on and off light on area surrounding the screen isn't working anymore either. Has anyone else had similar problems? Any solutions? Thanks!

One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons

I have a late 2006 iMac that has just started giving me a message to reboot after a black screen comes down slowly from the top top of the screen to the bottom. I reloaded software and restored from Time Machine, it now happens frequently. Any insight?

I have a late 2006 iMac that has just started giving me a message to reboot after a black screen comes down slowly from the top top of the screen to the bottom. I reloaded software and restored from Time Machine, but it keeps happening, now several tomes a day. Any insight as to the issue or a proposed solution?

Unplug any peripherals you have except your keyboard, reboot, and check activity monitor for apps. Keep running apps to a minimum to find the App causing the issue.

TS1717 I have older version of itunes on Windows Vista, when i check for updates it states it cannot connect to itunes update server even though i am connected to the internet, i have an iphone that has songs in the cloud and i wan to add them to my libra

I have older version of itunes on Windows Vista, when i check for updates it states it cannot connect to itunes update server even though i am connected to the internet, i have an iphone that has songs in the cloud and i want to add them to my library?

Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
http://www.apple.com/itunes/download/

I have a D-LInk router that has lost my network name and protection. How to I re-set it up?

Similar Messages

Maybe you are looking for