I have a Dell monitor ST2210, which I want to connect to my new Macbookair, what software and drivers do I need to use?
I have a Dell monitor ST2210, which I want to connect to my new Macbookair, what software and drivers do I need to use?
Mar14Apple,
which resolution are you using when you use your monitor? Is that resolution supported through the monitor’s VGA port? (You’d probably have better throughput by using an adapter for the HDMI port or DVI port instead.) When you say that the trackpad doesn’t work, does that mean that the cursor is not visible on the monitor, or that it physically does not work, such that clicks are not registered, &c.?
Similar Messages
-
I have a mac mini server which I want to set up for remote access from windows and mac pcs. How do I do this. I can access it form my home network OK
Posted in error.
-
got a question for all you peeps
dos anyone know about i phones i have a i phone 3gs which i got unlocked i did a master reset or summin and just had a pic of apple so i plugged it in i tunes downloaded and it now says no service at the top of phone and i tunes says invalid sim i put the correct sim in it used to be locked too and still says same pls any one with ideas?hi sorry what happoned is that ages ago i brought a i phone 3gs on 02 network i went to a sml phone shop and payed for them to unlock it. it has been fine till yesterday when i went to reset it from the phone it then turned off and came back on just just an image of a apple for about an hour so i connected to i tunes and it said downloading software after another hr it had finished but then i tunes said in had to insert a sim so i had to un plug the phone from laptop while i did this i put my orange sim in and the i phone said where do i live and had to connect to a internet connection but all the time saying no service where the signal bar is and then says activating i phone it took a few min and said couldnt finish it bec of the signal and to connect it to i tunes to do it so i connected it to itunes and i tunes just keeps saying invalid sim so i took my orange sim out and put a 02 sim in and is still saying invalid sim on itunes?
-
I have an eMac which I want to connect to my home wireless network. My router is D-Link - 601 tech. 802.11n. My eMac is wireless ready but does not contain an airport card. Do I need a card and an airport station? What else?
You need the Airport card OR Airport Express but not both. Considering the age of your machine, I recommend Airport Express as you will find other uses for it whenever you replace the eMac.
To set up the AE, you do need OSX 10.4 or higher. -
I have several pdf files in my computer which are organized in folders. I want to transfer them to IBooks (in my Ipad) and keep the folder structure I use in my computer. Is it possible to do it? Do I need any other app?
By design, the organizer (and any other database management systems) is there to prevent you from duplicating your media files. The catalog management allows you to have the same image in different categories or albums. Duplication in different folders is to be absolutely avoided.
The same image file can have multiple tags like 'family', 'vacations', 'birthdays' and be present in three different albums with the same names. On obvious advantage is less disk space. Another one with your present folder system is that if you edit one of your duplicates, the other ones are unchanged.
I don't see an easy way to make your present folder structure simplified for the organizer ... -
I have some expensive plug-ins which are not being recognised by the new Logic. Where should I install them ?
I am using Mavericks OS, and I am considering transfering my choiceof DAW to Protools.
YoursdisillusionedbyLogicHi
LPX only supports 64bit Audio Unit plugins. You probably need to get the latest updates for all of your plugs.
Some plugs are not currently available as 64bit versions: you may want to try
http://www.soundradix.com/products/32-lives
CCT -
i have an old ipod touch and use it everyday now i cant get on facebook and cant download apps which i want as it requires ios 4.3. what use is it to me anymore and are apple willing to do something about it
Your only way is if you have the version that was compatible on your computer such as in the recycle bin/trash or in a computer file backup. In that case delete the current version that is in your iTunes App library and replace it with the older version. Then sync.
-
I have some dts cd's that I want to import into itunes on a windows pc and then play back on my apple tv 3 (i think its 3, about 9 months old) to listen to through my onkyo amp via hdmi as dts, when I play back I just get white noise. I have seen lots of old posts which go on about converting files but am wondering wherher at the current time with the latest versions of itunes and apple tv whether this should by now be a virtual play out of the box solution.
I have tried connecting my atv to the amp by optical cable but that didnt produce anything better and am assuming that a hdmi cable should be able to reproduce everything an optical cable does.
Is this something I should be able to achieve without having to recode the files?
Tracks are imported to itunes as apple lossless, have tried setting the atv audio settings to auto and 16 bit, neither works yet I was told some time ago by an apple rep that the atv shoud be able to handle any type of audio as it just passes it to the amp to decode. I am not stupid but not that technical when it comes to audio and bitrates etc so any explaination would be appreciated.
Thanks in advance for any helpWilly, the procdedure you describe works perfectly for AppleTV G1. In fact, I frequently play DTS music discs ripped to my iTunes library as Apple Lossless (ALAC) and synched to the ATV. What happens is that, as far as iTunes and the ATV are concerned, a conventional stereo 16/44 audio file is being played; however my reciever detects the DTS data stream, and instead of outputting static, it decodes the 5.1 channels correctly. This process parallels the way DTS discs were designed to be played back: a conventional CD player is connceted, via digital out, to a DTS-aware reciever/pre-amp and the two channels of static are recognized as 6 channels of DTS-encoded audio.
However this process will only work if the player (CD, ATV, PC, etc.) sends a "bit-perfect" 16 bit/44.1 khz data stream to the decoding device. In the case of ATV G2 and G3, as has been discussed elsewhere, the unit resmaples all audio - including 16/44 PCM (Redbook CD) - to 16/48. While this is not a big deal for conventional audio CDs, MP3s, and AAC files, it mangles the fragile DTS datastream and renders it undecodable. The resulting static that you hear is just like the static you would hear if you played a DTS CD on a non-DTS capable system.
Sadly, I'm not aware of any easy way around this. You could use a program like Foobar (and the DTS plugin) to convert your DTS CDs to 6-ch .wav or .flac file. From there you could transcode the file to AC-3 and then mux it into a video container that ATV supports. You may need add a dummy video track, for iTunes/AppleTV to be ok with the file, though I'm not sure. This may be a lot of work.
Sorry for the bad news. I wish that the iTunes/ATV ecosystem had better multi-channel audio support.
Steven -
I have updated my iphone this evening and is has asked me to connect my phone to itunes, I connected it to a computer with itunes and it says it needs restoring? and all my images etcwill be earsed I need help as I have not backed my iphone up previously please help?
YOur phone is in recovery mode, any data that was on there is already gone, you will have to restore your phone and use whatever backup you to restore to.
-
I have an iPhone 4s. My problem is that I can't see the icon of FaceTime and iMessage. I need to use these apps. What should I do?
Red21Gerard wrote:
I have an iPhone 4s. My problem is that I can't see the icon of FaceTime and iMessage. I need to use these apps. What should I do?
FaceTime:
Check Settings>FaceTime>ON and check Settings>General>Restrictions>FaceTime>ON. There is no icon, on the 4 & 4S FaceTime is accessed through contacts. Go into your Contacts, access the contact you want to FaceTime with and you will see a tab at the bottom of their contact card. You can also access FaceTime by going into your Phone app, select dialling keypad, dial number, press call and an option for FaceTime on the keypad will appear. It should be noted that FaceTime has been removed from iPhones sold in some Middle Eastern countries at the express wish of the respective Governments.
iMessage:
Check Settings>Messages>iMessage>ON. The icon is the same as your SMS icon. This support document will explain how to use iMessage http://support.apple.com/kb/HT3529 -
I have just updated my i phone 4s with the new ios 6 software and most of my apps have disapeared when i got to the app store and search for an app i cant find i click on it and it says the app is installed. but i cant find it in my apps if i double click on it it opens. Any ideas?
Thanks PeteI have the same problem. Some of my purchased songs are missing also.
-
I have two macs in my house. One is newer and came with the os x mountain lion software and the other one needs to be upgraded. I was wondering if there is a way to take upgrade from one to the other? Should not have to buy this software again.
Welcome to Apple Support Communities
Buy it for the other computer. Mountain Lion is preinstalled on the new Mac, but you can only use it in the new one -
I have turned two computers on to home sharing. I am now on this computer wanting to put my music on to this itunes and i know i need to find the other computer in the drop down menu from " Home Sharing " but that menu isnt there on the left?
If you have the horizontal menu bar showing (File, Edit, View,...), select View, then select Show Sidebar.
If the menu bar is not showing, dorp down the menu in the very upper left corner and select show menu bar, then follow steps above.
Hope that helps. Good luck. -
Hi guys, i'm a noob on here, I've a macbook pro 10.5.8 osx which I want to Keep running (traktor dj soft) whilst shut and see screen in realtime on my iphone (laptop open = zero crowd interaction
First, make sure that the apps that you depend on are Intel-compatible and not PPC only Take a stroll over to Roaring Apps and make sure that you check all of the applications that you use on a regular basis.
You might want to just upgrade to Snow Leopard if it looks as if you've a number of PPC apps - going the Mountain Lion route may be very expensive for you otherwise.
Good luck,
Clinton -
Downloaded the new Ios 7 software and my email inboxes have disappeared from my home page
Downloaded the new Ios 7 software and my email inboxes have disappeared from my home page
Try a reset ...
Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
Maybe you are looking for
-
BAPI_MOSRVAPS_SAVEMULTI3 Taking longer time to complete
I am calling this bapi passing 100k records in the background job and it takes more than 5hrs to complete. Is there any way this run time can be reduced. I cannot slice the file as I need to create the master schedule either all or none. also I tried
-
How do I remove a navigation pane in acrobat reader XI
How do I remove at all a navigation pane on the left in acrobat reader XI? It is really very annoying remove it hundred times using the right mouse button.
-
ClassNotFoundException trying to load classes in a .war file inside an .ear file
Hi. I've deployed an EJB2 enterprise app as an ear file on WebLogic 6 without errors. The ear file contains web app and ejb components in war and jar files. The web component is set to be the default web app in the confi
-
Hi, i have a little problem with the sound. I set to use the 5.1 option, i listen the front speaker good, but the others, rear, center and sub speaker, very, very low. I tried with the NVIDIA and REALTEK drivers, and i can´t loud the sound. WHY??????
-
MRJ/Swing, I know the solution, can't find the answer!!!!
Hi I am trying to use SWING on MRJ 2.2, I know this is a popular question and that the MRJ does not come with SWING and I need to install the standalone SWING libraries. Which is all well and good, until I try to find them! I have found JFC 1.1.1 whi