I have a Droid 2 and I get a message that says, calls are restricted and can not update phonebook.

Any thoughts as to what is wrong?

Hi Imbabwa, I apologize for delay as I understand this is a time sensitive matter! It sounds like Call Restrictions might have been accidentally setup. Try checking Menu>Settings>Location & security>Setup restriction lock>Uncheck Enable restriction lock. Please keep me posted on the status as it would be my pleasure to provide additional assistance.
Thanks,
YaleK_VZW
Follow us on Twitter @VZWsupport

Similar Messages

I plug in my printer and I get a message that says, "the disk you inserted is not readable." It didn't do this before but after I installed a segate hardrive software. I have removed the segate hardrive software but the message still appears.

I plug in my printer and I get a message that says, "the disk you inserted is not readable." It didn't do this before but after I installed a segate hardrive software. I have removed the segate hardrive software but the message still appears. What can I do to remove this error.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below on this page to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -f -a TextEdit
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
{ sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; sudo defaults read com.apple.loginwindow LoginHook; sudo crontab -l; } 2> /dev/null | open -f -a TextEdit
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
{ launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}'; crontab -l 2> /dev/null; } | open -f -a TextEdit
Step 4
ls -1A /e*/{la,mach}* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -f -a TextEdit
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' | open -f -a TextEdit
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

I am trying to delete an XLS file from a network drive and am getting a message that says the file cannot be deleted because it is in use. I can't see where it is in use and have tried to reboot the computer to no avail.

I am trying to delete an XLS file from a network drive and am getting a message that says the file cannot be deleted because it is in use. I can't see where it is in use and have tried to reboot the computer to no avail. I can delete other files but several XLS files are giving me this message.

You said it was a network drive. So is someone else on the network using that same file or may have have left with excel still accessing it on their system?

I have a hp photosmart c7280 all in one and i get a message that says "pump motor stalled.

I have an HP photosmart C7280 All in One and I get a message that says pump motor stalled. I have done everything from resetting and turning it off. I have checked to make sure that there is not any paper jam. It makes a clicking sound after it has been reset and then the message "pump motor stalled" pops up. Any suggestions or should I just toss and buy new??? It is only three years old but it is out of warranty.

You might try the suggestions in this post. There is also a post here that reports success.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

I am trying to install an update of Microsoft office and I get a message that says. This application must be closed ETC..... I am running Parralell and I think it is there. The two programs are "Microsoft Database Daemon" "SyncServicesAgent"....

I am trying to install an update of Microsoft office and I get a message that says. This application must be closed ETC..... I am running Parralell and I think it is there. The two programs are "Microsoft Database Daemon" "SyncServicesAgent". How do I close these programs?

If the Office updates have to be run through Win in Parallels, there's not really a section here that covers that , because Neither Office or Parallels are Apple products. There is only a small chance that you'll find someone with BOTH your conditions who just happend to look into a forum on older iMacs.
Parallels has a forum here:
http://forum.parallels.com/forum.php
I think you'll get a faster response there.

TS1424 I purchased an album from iTunes using my computer. All of the songs from the album are on my computer and play perfectly. When I try to sync the songs to my iPhone or iPad, I get an error message that says 3 of the songs can not be downloaded to t

I purchased an album from iTunes using my desktop computer. All of the songs from the album are on my computer and play perfectly. When I try to sync the songs to my iPhone or iPad, I get an error message that says 3 of the songs can not be downloaded to these devices. Any ideas?

Thanks very much I have contacted them via this. Just hope they respond quickly- rather annoing! Greatly appreciated though

While syncing my I phone it gets to step six "optimizing " and gets almost to the end and I get a message that itunes has stopped working and has to close. it get to like 1074 of 1138 items to optimize when iTunes quits. Any suggestions on how to fix this

While syncing my I phone it gets to step six "optimizing " and gets almost to the end and I get a message that itunes has stopped working and has to close. It get to like 1074 of 1138 items to optimize when iTunes quits. Any suggestions on how to fix this?

Same problem here! Moreover, for some reason, the pictures in my iPhone 3GS somehow have been divided into 2 folders, Photos and Medialibrary. And when I open iPhone as a folder through the explorer I can see only the Photos folder, but cannot see the Medialibrary folder which stores the photos taken before updating/upgrading the iPhone and getting separated folders!!! What the hack with all of this?!!! When I connect iPhone to PC it automatically opens iTunes and starts syncronizing it, but at the process of OPTIMIZING the photos (and according to the number of photos it shows, I see that it tries to syncronize that invisible Medialibrary folder) the process suddenly stops and error message pops out Tried the sync test, tried the button DEBUG in that pop out message, but NOTHING HELPS!!! Also, when I open the Medialibrary in my iPhone, the screen get sblack all through scrolling it down, only the video clips are shown there... >.<
So, could you, apple developers, please, explain WHAT THIS PROBLEM IS ABOUT?!!!!!! FIX IT! I am getting ****** of to spend hours at the computer and reading those lame advises which do not help at all! I have my own things to do except reading your support websites. And I payed for the product ready to use, but not a halfproduct which problems should further be solved somehow by users..

Photoshop Elements 10 will not open. I get Error message that says "Runtime Error!" and closes. What do I do?

Help. Photoshop Elements 10 will not open. I get Error message that says "Runtime Error!" and closes. What do I do? What does it mean? I bought Elements 10 at a retail store. It did work for a while.

Hi,
Can you post back with the following.
1. The full Model No. and Product No. of the notebook ( from the service tag underneath your notebook ) - see Here for a further explanation.
2. The full version of the operating system you are using ( ie Windows 7 32bit ).
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

TS4036 I upgraded to an Iphone 5 and open new Icloud account, I then backed up my phone on my brothers Mac Pro, I now want to restore my info to my phone and I get a message that says not enough space. What do I do

I upgraded to an Iphone 5 and open new Icloud account, I then backed up my phone on my brothers Mac Pro, I now want to restore my info to my phone and I get a message that says not enough space. What do I do

Delete all back ups on MacBook and create new back up. Restart his MB and attempt to restore again. Do not forget to erase your iphone 5 before restore.

I got an iTunes card as a gift and when I enter the code to redeem it I get a message that says "the code you entered has not been properly activated. Please contact iTunes..." Please advice.

I got an iTunes card as a gift and when I enter the code to redeem it I get a message that says "the code you entered has not been properly activated. Please contact iTunes..." Please advice.

what did itunes say when you contacted them?

When I start to download Firefox, I get a message that says "This type of file can harm your computer. Do yiu want to keep Firefox...p7.0.1.exe anyway? What does that mean and in what way can it harm my computer? Do I download it anyway?

When I start to download Firefox, I get a message that says "This type of file can harm your computer. Do yiu want to keep Firefox...p7.0.1.exe anyway? What does that mean and in what way can it harm my computer? Do I download it anyway?

You get that message any time you download an executable file. It is safe to open as long as you download from http://www.mozilla.org/en-US/firefox/new/

My Safari page won't open and I get a message that says "Safari can't find the server"

My Safari won't open and I get a message that says " Safari can't find the server" HELP

Hello Fred5960
If you are having issues with connecting to the internet then check out the articles below to troubleshoot your issue.
Troubleshooting "A connection failure has occurred", "The specified server could not be found" or similar messages
http://support.apple.com/kb/ts1843
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Regards,
-Norm G.

Using Maverick, when I try to add music to a movie, I get a message that the files are protected and unavailable. How do I unprotect them?

I recently downloaded to Maverick. Now when I try to add mucis from iTunes to a movie I am making, I get a message that the files are prtected and unavailable. This never happened to me before. How do I correct this problem?

Well, it sounds as if you are trying to violate copyright protections - trying to use music that you purchased for individual use in a way that is not permitted.
The fact that you were able to do this before would not change the fact that it is not allowed.

I can not download the new version of Firefox. I keep getting a message that says "Firefox 5.0.1dmg could not be opened, because an unknown error occurred" HOW do I fix this?

Every time I try to download the new version it just says I can not download the new version of Firefox. I keep getting a message that says "Firefox 5.0.1dmg could not be opened, because an unknown error occurred - Try saving to disk first and then opening the file"

If you have problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the DMG file to the desktop
* Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data.
* http://kb.mozillazine.org/Profile_folder_-_Firefox

I keep getting calls, so I added that number to my list of calls to block. It doesn't ring anymore, but I keep getting notification messages that say "Call back". Why do I receive this when the call should be blocked?

I keep getting calls from (removed), so I added that number to my list of calls to block. It doesn't ring anymore, but I keep getting notification messages that say "Call back (removed)". Why do I receive this when the call should be blocked?
Private info removed as required by the Verizon Wireless Terms of Service
Message was edited by: Admin Moderator

Okay, you are correct the call is not supposed to ring in. Have you done any troubleshooting on the phone? First off, try power cycling the phone. Turn the phone off, then back on again. If that does not work, then try a reset. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone will reboot. See if that changes things. Is the caller using the exact number that you blocked, or is it possible they are using another number, or have restricted the Caller ID?

I have a Droid 2 and I get a message that says, calls are restricted and can not update phonebook.

Similar Messages

Maybe you are looking for