I have a dual-screen setup - Workspace Layout Panels - not functioning properly.

I have a dual-screen setup and since updating to 10.10.2, the panels open on the main screen - and not in the positions as they were saved in a Workspace layout.
Tried trashing the prefs - which works, but when I save a new Workspace layout, it does the exact same thing.
Any help is greatly appreciated. Thanks.

Hi Christopher,
This is a known issue and the product team is working with Apple to address it. Stay tuned.
Thanks,
Preran

Similar Messages

Is it possible to have a dual screen setup with an iMac (2012) and an iMac (mid 2007)?

Hello Everyone,
I have two iMacs. One is a 2012 model and the other is a mid 2007 model. Would I be able to use the mid 2007 model as an extra monitor?
I was going to purchase a mini dvi to mini display port cable and see what happens but I think it would be a good idea to see what everyone else thinks. Thanks for any suggestions!
- Nolan

The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
I am thinking that won't work. The older iMac's video port only goes on direction - out. It won't take the signal from the newer iMac. You might be able to do something with this software;
http://www.screenrecycler.com/ScreenRecycler.html

X crashes on startup with AMD dual screen setup

Ever since I bought my AMD Kaveri A10-7850K at the end of January last year I've been having trouble getting a dual screen setup to work properly. Initially I put this down to poor beta drivers, and as I had far too much going on to investigate the issue further beyond some fiddling with xorg.conf, I bought an AMD A4-4000 as a temporary solution while waiting for the Catalyst drivers to catch up.
In June last year I decided to give my A10-7850K another go, assuming that the Catalyst driver would have matured enough in the meantime to cater for the Kaveri processors. Unfortunately the situation was still the same, and I I didn't have the time nor want to be swapping processors all constantly to I decided to just give up on a dual monitor setup for the time being.
After many years of using two screens, however, it is very hard to get used to a single monitor again, and as January is a quiet month for me I decided today to have another at getting it to work properly.
My setup is as follows:
an LG LG 23EA63V connected via HDMI as my main monitor at 1920x1080
a Viewsonic VP-171b connected via DVI as my secondary monitor at 1280x1024
AMD A10-7850K APU
Catalyst 14.12-1 drivers installed from Vi0l0's repo
Xorg 1.15 installed from Vi0l0's repo
KDE 4.14.3 using kwin
KDM is launched using kdm.service
KMS disabled via nomodeset
fglrx module loaded on boot via cat /etc/modules-load.d/catalyst.conf
Tear free rendering enabled
After plugging in my secondary monitor configuring it in amdcccle to be to the right of my primary moniotor in multi-display desktop mode, everything works correctly. This even works in my preferred setup where the secondary monitor is rotated into portrait mode, although I currently have not configured rotation so as to not overcomplicate the troubleshooting.
Upon rebooting, however, X hangs with a static white cursor in the top left hand of both screens, which after a while disappears completely. I then have to unplug the secondary (DVI) monitor and hard reset the PC before I can boot into my desktop again. The bizarre thing is though that when I plug in my secondary monitor again and configure it as desired, either through amdcccle or krandr, everything works perfectly again.
This is, of course, an incredibly cumbersome way of working, especially when most of the time I forget to disconnect my DVI monitor prior to turning on my PC, hence me just making do with a single monitor for the past 7 months.
I did a complete fresh install of Catalyst yesterday (uninstall drivers, delete remaining config files, reinstall drivers from repo), to no avail.
Output from xrandr after rebooting with the secondary monitor disconnected:
$ xrandr
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 16384 x 16384
DFP1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 510mm x 290mm
1920x1080 60.00*+ 50.00 59.94 60.00 50.00 59.94
1776x1000 50.00 59.94 50.00 59.94
1680x1050 50.00 59.95
1400x1050 50.00 59.98
1600x900 50.00 60.00
1280x1024 50.00 60.02
1440x900 50.00 59.89
1280x960 50.00 60.02
1280x800 50.00 59.81
1152x864 50.00 59.96
1280x768 50.00 59.81
1280x720 60.00 50.00 59.94
1024x768 50.00 60.00
1152x648 50.00 59.94
800x600 50.00 60.32
720x480 50.00 60.00 59.94
640x480 50.00 60.00 59.94
DFP2 disconnected (normal left inverted right x axis y axis)
CRT1 disconnected (normal left inverted right x axis y axis)
Output from xrandr after reconnecting the secondary monitor:
$ xrandr
Screen 0: minimum 320 x 200, current 3200 x 1080, maximum 16384 x 16384
DFP1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 510mm x 290mm
1920x1080 60.00*+ 50.00 59.94 60.00 50.00 59.94
1776x1000 50.00 59.94 50.00 59.94
1680x1050 50.00 59.95
1400x1050 50.00 59.98
1600x900 50.00 60.00
1280x1024 50.00 60.02
1440x900 50.00 59.89
1280x960 50.00 60.02
1280x800 50.00 59.81
1152x864 50.00 59.96
1280x768 50.00 59.81
1280x720 60.00 50.00 59.94
1024x768 50.00 60.00
1152x648 50.00 59.94
800x600 50.00 60.32
720x480 50.00 60.00 59.94
640x480 50.00 60.00 59.94
DFP2 connected 1280x1024+1920+0 (normal left inverted right x axis y axis) 338mm x 270mm
1280x1024 60.02*+ 75.02
1280x960 75.02 60.02
1152x864 75.00 60.02
1280x768 75.02 60.02
1280x720 75.02 60.02
1024x768 85.00 75.03 70.07 60.00
800x600 85.06 72.19 75.00 60.32 56.25
640x480 85.01 75.00 72.81 66.61 59.94
CRT1 disconnected (normal left inverted right x axis y axis)
my xorg.conf file:
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-1"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Monitor"
Identifier "0-DFP1"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
Option "PreferredMode" "1920x1080"
Option "TargetRefresh" "60"
Option "Position" "0 0"
Option "Rotate" "normal"
Option "Disable" "false"
EndSection
Section "Monitor"
Identifier "0-DFP2"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
Option "PreferredMode" "1280x1024"
Option "TargetRefresh" "60"
Option "Position" "1920 0"
Option "Rotate" "normal"
Option "Disable" "false"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
Option "Monitor-DFP1" "0-DFP1"
Option "Monitor-DFP2" "0-DFP2"
BusID "PCI:0:1:0"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-1"
Driver "fglrx"
Option "Monitor-DFP1" "0-DFP1"
BusID "PCI:0:1:0"
Screen 1
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Virtual 3200 3200
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-1"
Device "aticonfig-Device[0]-1"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
My Xorg.0.log:
http://pastebin.com/ki5A0T7R
I'm quite desperate to get this working, almost a year after buying my new setup, so any pointers are welcome!
Thanks in advance!

Actually of the above listed commands only xclock is in xorg-apps .
pacman -S xorg-apps xorg-twm xterm
is needed.

ITunes startup reinitializes dual screen setup

Dear all,
as a dual screen setup, I have a MacbookPro7,1 (late 2010 Core2Duo 2,4GHz 13" model, OSX 10.6.6) attached to a NEC MultiSync LCD2690WUXi via DVI-I, using the digital signal flow. I am not using display mirroring. The resolution of the external LCD2690WUXi is 1920x1200@60Hz.
Everything works fine and "as expected" until I start iTunes.
Doing this, both the MacBookPro and the external NEC monitor blank for a short time, as if the MacBook would reinitialize the displays. After doing so, I get the correct resolution on both screens back again, but all windows have now moved to the main screen and decreased in their size, so the dual screen arrangements are lost during this phase. I have to manually put everything back in place, which is highly annoying.
I suspect this behavior might also relate to QuickTime being part of iTunes?
If you have any ideas, please share your knowledge or experience with me.
Kind regards,
Jens

The only solution (well, it's not really a solution, it's a miserable workaround) was to exchange the assingment of the primary and the scondary display, including all the negative side effects you can imagine.
Hopefully Firefox will gain a higher grade of intelligence one day.

How to darken only one screen in a dual screen setup ??

Hi All,
I have a dual screen set-up probably like many of you and sometimes I prefer to use LR only on 1 screen. That allows me to work on Photoshop or read my emails or whatever else I'd prefer to do on the other screen. My dilemma is when in Lightroom & I press the letter L to darken the screen around my image, for better viewing, it also darkens the other screen that I'm working with. Is there a way to prevent both screens from darkening?? Thanks Ron
PS: Apologies if this has been addressed previously as I could not locate it

Thank you digitaldog, I didn't think so either

[SOLVED] Best DE for dual screen setups?

Sorry if this is a dumb question, but what is the best DE for a dual screen setup on Arch? Also, can I just use the standard xrandr method to be able to drag windows between screens, if not, what do I do?
Many thanks.
Last edited by treeman1111 (2013-02-19 22:44:59)

Ok, so here is the output of xrandr -q:
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 1920 x 1920
DFP1 disconnected (normal left inverted right x axis y axis)
DFP2 disconnected (normal left inverted right x axis y axis)
DFP3 disconnected (normal left inverted right x axis y axis)
DFP4 disconnected (normal left inverted right x axis y axis)
DFP5 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 531mm x 299mm
1920x1080 60.0*+ 50.0 59.9 60.1 50.0 60.0
1776x1000 50.0 59.9 50.0 60.0
1680x1050 60.0 50.0 59.9
1400x1050 60.0 50.0 59.9
1600x900 50.0 59.9
1280x1024 50.0 75.0 60.0
1440x900 50.0 59.9
1280x960 50.0 75.0 60.0
1152x864 50.0 59.9 75.0
1280x768 50.0 75.0 60.0
1280x720 60.0 50.0 59.9
1024x768 50.0 75.0 60.0
1152x648 50.0 59.9
800x600 50.0 75.0 60.3
720x480 50.0 60.1 60.0 60.1 59.9
640x480 50.0 75.0 60.0 59.9
DFP6 disconnected (normal left inverted right x axis y axis)
DFP7 disconnected (normal left inverted right x axis y axis)
CRT1 disconnected (normal left inverted right x axis y axis)

When I have finished working on an image in Photoshop and I hit the save button it goes instead to the "save as" screen. This never happened in previous Photoshop versions. When I get to Lightroom, I have a grey screen the says "File could not be found."

When I have finished working on an image in Photoshop and I hit the "save" button, it goes instead to the "save as" screen. This never happened in previous Photoshop versions. When I get to Lightroom, I have a grey screen the says "File could not be found." I then have to go to "locate" to get the image. When I select the correct image, I get a message that it is not the same file name but I am eventually able to access the image. Needless to say this is having a negative impact on workflow!

The problem with write permissions for the OneDrive folder only shows up in Lightroom 6's export dialogue, that's why it's to irritating. Lightroom 5.7.1 is not having that problem nor does the file explorer. The problem also exists on both of my machines. I will try to check for other problems with the OneDrive troubleshooter though: Running the OneDrive troubleshooter - Windows Help

Restarted my MacBook Air, just have a white screen with apple . Will not start up

Restarted my MacBook Air, just have a white screen with apple . Will not start

What version MacBook Air do you have? Usually identified by the year you bought it, i.e. mid-year 2012, 2011, etc. Also, what OSX are you running? (please provide OSX ver number, i.e. 10.8.2 for latest Mountain Lion, etc.)
Not sure I can help you directly but for others to lend a hand, they'll need to know this information to make a sound suggestion. I see you're new to posting here so this will help you in the future.
Good luck.

HT4623 The APP application on my iPad does not function properly - any downloads requested immediately fail and send me back to the main iPad screen. Any suggestions on how to fix this - all software has been updated to iOS 5.1.1 and no other updates are

The APP application on my iPad does not function properly - any downloads requested immediately fail and send me back tot he main iPad screen. Any suggestions on to hoe to fix this? The software has been updated to iOS 5.1.1, and no furthe updates are available.

This is my boilerplate response when app downloads are stalled or in the "waiting" mode. There are a bunch of things here to try.
Tap on the "installing" icon and see if you can pause the install, then tap on it again in order to resume the install.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download and install at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and see if the install resumes.
If all else fails, download the updates or the apps in iTunes on your computer and then sync the content to your iPad.

In my newly purchased MacBook Air, Dropbox does not function properly. It asks for Mac OS Password for my computer which I do not have.

In my newly purchased MacBook Air, Dropbox does not function properly (it shows MS Word, Excell and Power Point docs but not pictures). It asks for Mac OS Password for my computer which I do not have. How should I get this password ?

If the user account is associated with an Apple ID, and you know that account password, the Apple ID can be used to reset your user account password.
Otherwise, boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select Utilities ▹ Terminal from the menu bar.
In the Terminal window, type this:
resetpassword
That's one word with no spaces. Then press return. A Reset Password window opens.
Select your boot volume if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
Select  ▹ Restart from the menu bar.
You should now be able to log in with the new password, but you won't be able to unlock the Keychain. If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it. You’ll need to reset your keychain in the preferences of the Keychain Access application.

I have safari 5.1.7 and it's not working properly. Should I use Safari 5.1.9 or 6.0.4?

I have safari 5.1.7 and it's not working properly. Should I use Safari 5.1.9 or 6.0.4? Mac OS X 10.6.8. 17" MacBook Pro

Use your Software Update under the Apple menu, it SHOULD bring Safari up to 5.1.9 on OS X 10.6.8.
Apple IS issuing security and other updates for Snow Leopard users.
OS X 10.4/10.5 need to upgrade, 10.6.8 ok still
Safari 6+ is only for 10.7+ users as OS X is morphing into iOS.
10.7 and 10.8 will not run your PPC based apps of 10.5/10.6
If Software Update is not working, then you have other issues, backup your users folders off the machine to a external storage drive (not TimeMachine!) and run through this list of fixes.
Most commonly used backup methods
..Step by Step to fix your Mac

The list of extensions for InDesign now have a yellow triangle warning symbol in front of a good many of the extensions and when moused over i get one of two messages: "Extensions may not function properly because it does not meet the dependency conditio

The list of extensions for InDesign now have a yellow triangle warning symbol in front of a good many of the extensions and when moused over i get one of two messages:
"Extensions may not function properly because it does not meet the dependency condition."
OR
Extension Status is not consistent with extension set configuration."
The reason I opened the Extension Manager in the first place was to check to see if I had installed a third party extension. And I was presented with these warning symbols. I haven't added anything, I haven't done anything that would cause this.
Does anyone know how to fix this???
I am running OSX 10.9.5; Indesign CS6 version 8.0.2 And Adobe Extension Manager version 6.0.8.28.
Thanks in advance!
Nina

Many InDesign pre-installed extensions (Those extensions you have immediately after InDesign installation) define dependency rules in their mxi files. Dependency means that one extension works well only if one or more other extensions are installed and enabled. If this condition is not met, the yellow triangle warning will be shown.
You can select an extension with warning, click "Advanced" tag page in the lower right panel. You will see "This extension has dependency on: <extension name> ...". Check whether every extensions listed here are available and enabled. If not, enable them. Repeat these steps for all the extensions which have warning.

I have got an IPhone 5. It has been locking itself and not possible to run it again. I have restored it by Itunnes. But still not functioning. I have bought it from London whitecity applestore and have been using it in Turkey. Any suggestion ?

I have got an IPhone 5. It has been locking itself and not possible to run it again. I have restored it by Itunnes. But still not functioning. I have bought it from London whitecity applestore and have been using it in Turkey. Any recomandation ?

Sorry, but the warranty for the phone is only valid in the country where you bought the device, and you can't send it in, Apple does not ship internationally.
Has the phone been officially unlocked? Only the carrier can unlock an iPhone.
iPhone: About unlocking

HT201412 i have facing a problem, my i phone is not workin properly, when i powered on then apper passcode window but after putting passcode then after some time automaiclly restart but from passcode window i can not enter further.

i have facing a problem, my i phone is not workin properly, when i powered on then apper passcode window but after putting passcode then after some time automaiclly restart but from passcode window i can not enter further.

Okay. You are not entering the correct passcode. If you forgot or it is not taking your passcode then you will have to restore.
See http://support.apple.com/kb/HT4113

I have a dual monitor setup. When I paste develop settings from one image to another, Lightroom switches the active window.

Strange problem. Lightroom 5.5. Windows 8.1. Dual monitor setup.
I'm processing a large batch of photos. I have Monitor #1 set as my main develop window, with Monitor #2 set only to display a larger version of the image I'm working with. If I copy the develop settings off of one image and try to paste them onto another image, Lightroom will switch from Monitor #1 to Monitor #2 as the main develop window, and will not display anything on Monitor #1.
If I then try to paste develop settings onto another image on Monitor #2, LR will then display a larger version of the image I'm working with on Monitor #1.
To work the way I want to, I have to continually drag my develop window back to Monitor #1 every time I try to paste develop settings onto a new image. How can I make this stop?

I just tried what I think you’re saying you’re doing and I don’t have the problem with LR 5.5 on Windows 7 SP 2.
Does the same thing happen whether you use the key shortcuts vs the Settings / Copy/Paste options on the menu?
I ask this because if you’re using the keyboard shortcuts, maybe you have some display-manager program that has bound itself to the Ctrl-Shift-V (paste settings) to the function of move-to-other-monitor which would do at least part of what you describe.
You can also test this theory by doing a Ctrl-Shift-V with an application other than LR as the active window and see if it moves. I suppose Ctrl-Shift-C might also play into it so try both of these hot-key combinations with a program that isn’t LR.
If none of this sheds any light on the situation, then give a more detailed description of the low-level functions you’re doing to accomplish the copy-paste of settings, so someone else could replicate the steps exactly.
Specific detailed steps, like:
left-click on source photo’s thumbnail in the filmstrip
press Ctrl-Shift-C to copy the settings
click Check-None
enable the white-balance and calibration checkboxes
click Ok
left-click on destination photo's thumbnail in the filmstrip
click on Settings / Paste Settings in LR’s menus to paste the settings to the selected photo

I have a dual-screen setup - Workspace Layout Panels - not functioning properly.

Similar Messages

Maybe you are looking for