I have a dx1210 the screen is blank as I switched it to run thru my tv but now it wont work at all
How do I reset my computer to run on its own (ie not thru tv) I switched over so the screen runs thru tv but now the screen is completely blank so I can't turn computer on to reset settings. The windows logo comes up when I turn monitor on but then nothing it just goes blank. Nothing has worked please help. Thanks.
I switched over so the screen runs thru tv
I'm confused! According to the specs and the manual (attached), the HDMI port is for incoming video/audio. How could you send the screen to a TV? Please explain in detail what you did.
To find the bitness of Windows, click System in Control Panel. It's the System type.
-Jerry
Attachments:
DX1210-userguide.pdf 8449 KB
Similar Messages
-
The new itunes update will not install properly and now itunes wont work at all
k, so I tried installing the new update for itunes and now it wont work at all. it says that the mobile device isnt installed. i have uninstalled and reinstalled itunes 4 times now.
My issue is it wont even reinstall onto my computer
Yes I'm aware of that. The procedures are also for trying in cases where iTunes can't be reinstalled due to a "Could not start Apple Mobile Device service" message.
If you're getting a different error message relating to the Apple Mobile Device Service (or Apple Mobile Device Support) when you try to reinstall iTunes, post back to let us know what that error message says. (Precise text, please.) -
i had my iphone 5c in my lifeproof case in the water and when i took my phone out there was a few drops on it but i didnt worry about it, but now it wont charge at all except to 4% and then it stops and ive had it in rice for 8 days........WHAT DO I DO
It sounds like the LifeProof case may have leaked. Did you pay for the Waterproof protection? If so, you can file a claim with lifeproof, pay the deductable, and get a replacement.
If you didn't purchase the Waterproof guarantee, if you have Applecare Plus, $79.00 will get you a replacement. If you don't have AppleCare Plus, then this is a $269.00 replacement lesson. -
i'm not able to purchase with itunes from the game clash of clans! I did it the first time, it worked, but now it wont work and says : contact support.
What they mean is iTunes Customer Service Contact - http://www.apple.com/support/itunes/contact.html
-
need help with 3gs which has decided to go mad really thanks
Sounds like your phone was hacked to unlock. Restoring the phone put it back to Apple specs for that phone. You will need to find out which carrier it is locked to and see if you qualify for unlocking.
-
I cannot access my device. The screen is blank however it has power. The phone will ring but since the screen is blank I cannot answer. It seems to be dead but has power?
When restoring to factory defaults/new iPod fails to resolve a problem that indicates a hardware problem an an appointent at the Genus Bar of an Apple store is in order.
Check your warranty coverage here:
Apple - Support - Check Your Service and Support Coverage -
I updated my iphone to the ios6 and now it wont work.
i updated my iphone to the ios6... and now it wont work at all.
it wont even turn on, it keeps going back and forth between the black screen and then the apple mark pops up for a few seconds, and then turns back to the black screen again... and that just keeps going on...
someone please help...Seems like ios6 isn't any good for any of their devices. I have an iPhone 4 and recently updated to ios6 and have had all the wifi problems and apps getting hung up on load screens. Restore is your best bet and downgrade if you can back to ios 5.1. If restore doesn't help with a fresh install of ios6 then call every Apple support number you can find and be heard like the 1,000s of other people like us with ios6 problems demanding support. There doesn't seem to be any quick fixes for ios6 other than an update from Apple.
<Edited By Host> -
I have been having trouble with my iphone 4 for the past day . i tried to update it to 7.0.4 then the screen went blank and it keeps telling me to connect to itunes . I have connected it to 2 computers , using different cords and it doesnt recognize it . It says it is in recovery mode and i need to restore . after clicking restore it says that my iphone cannot be restored . I am very frustrated because i have been online searching for solutions all day and nothing seems to work . As soon as i turn on my phone it goes to the apple logo for about 2 seconds then the connect to itunes screen . SOMEBODY PLEASE HELP ! my phone is my life and i need it back on .
Connect the device to iTunes and restore from the most current backup.
If the issue continues, restore as new. -
when i go to the app store to update the one app that needs to be updated, the screen is blank. It used to list all the apps that need updating and have a button called update all. Now nothing. Just a blank screen. How can I fix this?
There's been a problem with this all day. Seems to be a server problem - wait a day and try again, or use itunes on the computer to update, that works.
-
I tried to restore my I Phone today but now its not working. The screen is stuck with the plug in picture, and only allows me to make emergency calls. It says I have no service and I can't use my phone.
Why does the device show in the left hand side of I tunes, but the right hand side is blank and shows no options?Walter...seems to be a multiplying problem. My problem appears to be the same:
(Original iPhone Restore...HELP !!!
I was having syncing issues with my iPhone (an original) and ultimately took the step to restore the factory default settings in an attempt to start over from fresh...iTunes 'sees' the iPhone device and seems to go through all the requisite restore, load, verify steps, but I can't get the iPhone to load the main menu. I continue to get a window that shows a USB Cable pointing to iTunes...I have had 800 call support technicians and genius bar techs look at the problem without result.
Anybody run into this problem or have any ideas how to resolve? Thanks in advance for any assistance you might offer! regards, mdh)
That was a post I put in LinkedIn hoping to find someone with a similar experience and perhaps a solution. Had intended to post here...then saw your post of what appears to be the same issue.
HEEEEEEEEEEEELP! I want my iPhone back (please) -
The screen goes blank when I press to enlarge while watching netflix or a TV show. What have I done?
Have you tried resetting the iPad:
Reset iPad: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears. -
I have an Iconia 8 w1-810. I put in my password and the screen goes blank
I have an Iconia 8 W1-810. I can put in the pasword but then the screen goes blank. The password is correct, it tells me if I put the wrong one in. If i then press the power button and get the log-in screen up, but it says it's locked and disappears again. I can use the camera and when a mesage from macafee came up I could click onto the inyernet, but when I closed the tab down, the screen was still blank. Any ideas please?
Storm73,
Try the steps in this article to see if you can get to the advanced options and possibly run a start up repair or refresh to see if that fixes the issue. -
I have approximately 400 lives in reserve as gifts from friends in Candy Crush, but every time I try to access them, the screen turns blank. It will only let me use the 5 lives you are given every 30 minutes. Updates are up to date. Any suggestions?
Contact the app develed.
-
When i select the "Full Screen" option in video streams (like youtube, veoh, anything like that) i can do that one(1) time second(2nd) time the screen goes blank and can only exit it with the escape(Esc) button and then i have to restart firefox and again i have my one "Full-screen Ticket"
I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6. -
I downloaded the latest iOS7 to my iPad and then the screen went blank and would not respond. I have tried pressing the two buttons together and briefly get the Apple logo but still can not restart, the logo disappears. I have tried connecting to my iMac to restore the iPad but the device does not show up (I have an old iMac). What else can I do?
You need to be running Snow Leopard 10.6.8 at the very least in order to sync your iPad with iTunes so you could update your Mac, if it can be updated, and if you care to do so.
If that's not an option, you will have to find someone that can restore the device for you with their computer running iTunes or make an appointment at an Apple Store and ask them to restore the device for you.
I hope that you have an iCloud backup, because you will lose everything on the device when it is restored.
Snow Leopard can still be purchased in the U.S. Apple Online Store.
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Also, I would not give up on the reset technique....holding down on the sleep and home buttons at the same time until the Apple logo appears. It takes about 10-15 seconds and sometimes just a little longer to get the logo to appear.
Maybe you are looking for
-
Captivate 5.5 won't open .cptx projects I created in Captivate 6
I created several tutorials using Captivate 6, mostly demos. They looked fine in preview (using F8, F10 and F12), but when they were posted on the web (which is done through our IT department), two of the demo tutorials included images from one slide
-
How do I organize photos in iPhoto for ios
I am confused because there is a category for organizing photos here and in the iPhoto for iOS tutorial, but I cannot find any functionality for organizing photos into events and albums in the software. Am I missing something? Does anyone know how t
-
Generate a sequence with a PCI DIO 32HS
I'm using a C compiler and i'm working on a DAQ product PCIDIO32HS (653X). I want to generate a logic sequence (1,0,0,1...) in burst mode with an internal clock (PCLK) and send it on a line or a port. (Output) I tried many examples and many configura
-
Sony SR100 Camera support but not detected!!!???
The first time I started iMovie 08 I don't recall what I did, it just worked and importing video from my Sony SR100 worked perfect. That was the fist and last time. No matter what I try now it will not see the camera. Only iphoto sees it as "noname"
-
How do i change me security answers?
I don't know the answers to my security questions >.< In order to change them.. I need to know the original answers (I think).. Does anyone know a way to change the answers without entering your original answers? o.o