I have a error -50 on my software RAID 0

Impossible to write on my 4x1To Raid 0 on my MacPro, no problem for reading data but impossible to write.

Hard Drive failed and need to be replaced...
||-Although I am working on behalf of HP, I am speaking for myself and not for HP.-||
//Click on Kudos if my reply was helpful and answered your question//
||-If my answer solved the problem please mark the topic as the accepted solution-||

Similar Messages

Will OSX software Raid-0 on external drive be regonized elseware?

Are RAID setups created in Disk util recognized in other computers. Say i have 2 external drives (over eSata on my 08 mac pro) in a raid 0 from disk util, can I plug these two drives into another mac pro and have them work?
Basically, are software raid setups from disk utilily readible from all macs?

Both systems would have to have their own controllers or ports, but yes, they should move and work just the same on both.
There are Port Multiplier cases and controllers, and there are the 2 ODD ports people use, or direct connect SATA external controllers.
You can even create a RAID internal or external and move it and it will work, or change the drive bay and order of your drives, the RAID will still work and be intact.
What often doesn't work are eSATA/FW or eSATA/USB cases.
Mac Pro Discussion focus on using and expanding is here:
http://discussions.apple.com/category.jspa?categoryID=194

Partitioning two drives to enable OSX and XP software raid.

Hi Guys,
I have found out that XP support software raid 0 so I am wondering if I can do this.
I have 4 disks in the bays.
Disk 1 - OSX System disk
Disk 2 - XP System disk.
Now I want to partition Disks 3 and 4 into 4 partitions and use OSX software raid on 2 of the partitions and XP software raid on the other two.
I am pretty sure that this is ok with XP, is it ok with osx as well?
Cheers
Andy

Hi AndrewCapon;
Could you please tell me exactly what you expect to gain with RAID? I notice that you have never told us what form of RAID you expect to implement here. Different versions of RAID provide different benefits.
I think this is the much larger questions. So often I find that users have totally unrealistic expectations of what RAID will do for them.
Also please be aware that RAID is in no way a replacement for backup. In fact if you use RAID for storage of your data a good backup plan is crucial.
Allan

Server 2003 Software RAID-1 Fail - System won't boot

Have a Windows 2003 Server with software RAID-1, and the primary drive failed.
I tried editing the boot.ini of the 2nd drive but all I get is a black screen and blinking cursor.
The drive had 2 partitions. One of them shows up when we plug the drive into a PC, but the 2nd partition is unrecognized.
Boot.ini was:
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS=" "
multi(0)disk(0)rdisk(0)partition(2)\WINDOWS="Windows Server 2003, Standard" /noexecute=optout /fastdetect
I tried adding this after:
multi(0)disk(0)rdisk(1)partition(1)\WINDOWS=" "
multi(0)disk(0)rdisk(1)partition(2)\WINDOWS="Windows Server 2003, Standard" /noexecute=optout /fastdetect
Any ideas?

Hi,
I would like to confirm what is the current situation? Have you resolved the problem?
If there is anything that we can do for you, please do not hesitate to let us know, and we will be happy to help.
Best Regards,
Mandy
If you have any feedback on our support, please click
here .
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

?I am getting an error when installing on my dell inspiron with latest updates for drivers. Error 1406. I have the problem with Scan Snap software and a full version of reader.

?I am getting an error when installing on my dell inspiron with latest updates for drivers. Error 1406. I have the problem with Scan Snap software and a full version of reader.

Error 1402 | Error 1406 | Acrobat, Reader

HT1338 I keep getting a Networking Error: when i run Software update. i have 10.5.8 and want to upgrade to at least 10.6 or later. i know the network is working perfectly.

I keep getting a Networking Error: when i run Software update. i have 10.5.8 and want to upgrade to at least 10.6 or later. i know the network is working perfectly.

Snow Leopard OS 10.6 is not available via Software Update, it is paid upgrade.
Start by checking if you can run Snow Leopard:
Requirements for OS X 10.6 'Snow Leopard'
http://support.apple.com/kb/SP575
OS 10.6 Snow Leopard is available for $19.99 from the Apple Store:
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
and in the UK:
http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
but nobody knows for how long it will be available.
When you have installed it, run Software Update to download and install the latest updates for Snow Leopard.
To use iCloud you have to upgrade at least to Lion, but some functions are only available in Mountain Lion:
http://support.apple.com/kb/HT4759
You can also purchase the code to use to download Lion (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard), or you can purchase Mountain Lion from the App Store - if you can run that:
http://www.apple.com/osx/specs/

HT5945 Java has updated again today, i use a jave plug in to run my virtual software to access my work from home, today i have an error message saying security will not allow access to my website that i use to log in to work from, this is a JREdetection e

Java has updated again today,
i use a java plug in to run my virtual software to access my work from home,
today i have an error message saying that security will not allow access to my website
i use to log in to work from, this is a JREdetection error,
my system runs off java and citrix, i tried chrome,firefox and safari - same issue, if my system cannot detect java it wont run, it runs on plug ins.
How to i change my sec settings to allow access to this website, as i can only see that i can add apps not web addresses?

If you get an error that says can't backup, try moving the existing backup file to a safe location and thry again. again. You can find the location of the backup file here:
iPhone and iPod touch: About backups

Have a new itouch. I'm having trouble downloading iTunes. I keep getting the error message: Apple Application software was not found. Apple application support is required to run iTunesHelper. Please uninstall iTunes, then install iTues again. Error 2.

I have a new iTouch. I'm having trouble downloading iTunes. I keep getting the error message: "Apple Application Software was not found. Apple application support is required to run iTunesHelper. Please uninstall iTunes, then install iTunes again. Error 2." I have uninstalled and tried installing again and get the same error message. What do i need to do?
Lg

Install 7-Zip (free), or a free trial of WinRAR, and use one of them to extract the contents of the iTunesSetup.exe or iTunesSetup64.exe installer file, then try installing AppleApplicationSupport.msi as a standalone component. Even if it won't install you may get a more useful error message as to why not.
tt2

My downloads of iTunes and related software onto my Windows PC fails every time with error message that the software does not have valid signature. How to get around this problem?

I have trouble downloading iTunes software and related software like the new ios8 on both my desktop--Windows 7, and my laptop--Windows Vista, because I keep getting error messages saying the software has been deleted because invalid signature. I have tried download and install and I have tried just download, but neither method works. So I am stuck with the older software and my new iPad 2 Air isn't connecting because I need ios8 apparently.
I have an iPhone 5 and a new iPad 2 Air.
How to get around the Windows problem, please?
Thank you!

bump

When I restore software to factory setting I have an error. After that my ipad cannot connect to itunes any longer

When I restore software to factory setting I have an error. After that my ipad mini cannot connect to itunes

What does the error say or number?
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
 Cheers, Tom

Getting error message "The ipad software update server could not be contacted. You do not have enough access privleges for this operation" When trying to restor ipad mini

When I try to restor my ipad mini I get the error message "Te ipad software update server could not be contacted. You do not have enough access privleges for this operation." Please help!!

I also have same problem i dont knw what to do ???????????????? have u got any solution >>????

I have downloaded firefox. while running the software i have got an error as "software corrupt".what is the problem i am facing?

i have downloaded firefox. while running the software i have got an error as "software corrupt".what is the problem i am facing?

-> Uninstall your current Firefox
* https://support.mozilla.com/en-US/kb/Uninstalling%20Firefox
* DO NOT SELECT TO REMOVE USER DATA AND SETTINGS
* Restart your system
-> Download latest Firefox version from one of these links using some other Web Browser:
* http://www.mozilla.com/en-US/firefox/new/
* http://www.mozilla.com/en-US/firefox/central/
* http://www.mozilla.com/en-US/firefox/fx/
* http://www.mozilla.com/en-US/firefox/all.html
-> Install Firefox using the downloaded & saved Firefox installer file
* https://support.mozilla.com/en-US/kb/Installing%20Firefox%20on%20Windows
Check and tell if its working.

TS3694 ?? I have Iphone 3G , when i update software & during iphone restore software 3.1.2. i got error 1602. how i can solve it

?? I have Iphone 3G , when i update software & during iphone restore software 3.1.2. i got error 1602. how i can solve it ?

http://support.apple.com/kb/TS3694#USB

"There was an error downloading your ipad software.You don't have enough access privileges for this operation

For a series of events my iPad is now in recovery mode but when i try to ripristinate iTunes says "There was an error downloading your ipad software.You don't have enough access privileges for this operation"
How do i fix this? please help

http://support.apple.com/kb/TS1275
This should help.

HT201210 i have this error ''the iphone *** cannot be updatet at this time because the iphone software update server could not be countacted ore is temporarily unavailable'' i have 2-3 days tha try to update or restore the iphone but tha same again :/ pl

i have this error ''the iphone *** cannot be updatet at this time because the iphone software update server could not be countacted ore is temporarily unavailable'' i have 2-3 days tha try to update or restore the iphone but tha same again :/ plzz helppp

Try updating directly on the device, via iTunes on the computer, and iTunes on a different computer.
If the iPhone has been hacked or jailbroken, it may not be possible to update.

I have a error -50 on my software RAID 0

Similar Messages

Maybe you are looking for