I have a fairly new iPod touch and the touch screen has stopes working in certain places like the bottom row of apps and things on keyboard I have updated it and restored it multiple times it makes no difference please help!?
I have a fairly new iPod touch and the touch screen has suddenly stopped working..... Like the bottom row of apps has stopped working and certain buttons on the keypad are not working at all what so ever I have taken it to the apple store once before they told me to update it I did so and it didn't get better I have also restored it multiple times still nothing I really would like a working I pod please help!!!
If you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
Apple Retail Store - Genius Bar
Similar Messages
-
My touch screen has stopped working on my iPhone 5s
my touch screen has stopped working on my iPhone 5s I've forced a shut down but after turning it back on it won't let me put my pass code in please help
Follow the instructions here to restore using recovery mode.
-
Camera on back of my iPod Touch 4 has stopped working, what's happened?
The camera on the back of the iPod Touch 4G (The one on the silver metallic side) has stopped working completely. The front facing one still works.
Please help. I have had many problems with the iOS software, and I am getting frustrated!
Regards,
Alex.Have you tried the standard fixes:
- Reset the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restore the iPod via iTunes. First from backup and if problems persist restore to factory defaults/new iPod
- If problem still occurs make an appointment at the Genius Bar of an Apple store since you likely have a hardware problem. If so, they will give you a replacement under your warranty. -
My original ipod touch charger has stopped working?
I have a 32gb ipod touch 5th generation with an original ipod touch charger. It just stopped working one day and I couldn't charge my ipod anymore, I thought my charger was dead and broken so I decided to buy a new. It worked fine the first week, but then stopped working, is my ipod the problem? please help...
Was it a genuine Apple cable? If so then if it is defective Apple will exchange it at now cost. Same for the original cable if it was not abused and you purchased the iPod less than a year ago.
Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
My touch screen has stopped working. what can i do to fix this
what can I do to fix my touchscreen
Rebooting your iDevice
Hold down the Sleep (On-Off) and Home buttons together for about 10-15 seconds or until the Apple Logo appears - ignore the red slider if it appears - then let go of the buttons. The device should begin to start up.
If this doesn't work then make a Genius Appointment and take it in for service. -
I have just got the new iPod touch. Everything is working except my iMessage and I don't know how I can set it up.
Illaass
Gave my grandsons iPods for Xmas. Looks like one of them downloaded an app (text+) and must/may have deleated on hisiPod the iMessage app that was included on both with both iPods.
I want to ditch this new app (text+) and return iMessage to his phone as they both are wifi only and iMessaget is what they should both use. Ialso have a iPad (wifi only) and a iphone (both on iOS5) and a MacBook on 10.7.2
Any help as to how to do this (I would prefer not to due a full restore to the affected iPod if possible) -
ipod touch 4g has stopped docking with sony stereo cmt-bx70dbi
It appears that the update made the iPd incompatible with the Sony dock. Try contacting Sony. Downgrading the iOS is not supported by Apple.
-
My Ipod touch screen has gone white with bright white spots on it. I have restored it and it shows in ITunes but the screen is still white. Is there anything I can do? The warranty has run out so I will have to pay for any repairs (if it can be repaired). Any help would be much appreciated. Thank you in advance.
If you still have problems after restoring the iPod to factory defaults/new iPod then you very likely have a hardware problem. I would make an appointment at the Genius Bar of an Apple store.
-
i have and ipod touch 4g, it stop working out of nothing, i tried to restore, i plugged in to another computer and to the outlet wall and nothing, didnt drop it or got wet, someone told me that it happens sometimes with this ipod generation. what can i do? i bought it to years ago.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My new ipod touch screen- how to I keep it on 24/7?
My new ipod touch screen- how to I keep it on 24/7?
I cannot remember or find the setting that keeps my new ipod touch screen on all the time...until I want to shut it off. Any help is appreciated. Thank you.Thanks, I set it that way in the beginning (when I bought it.) to that. I just checked again, at your suggestion and it IS set up in that manner.
Its weird, right now it has been on screen without shutting off for an hour. However, when I first turned it on I did the slide to open, entered my 4 digit code and before I knew it it had closed the screen (shutting off). -
I have instaled Windows 7 64bit Enterprise edition and installed the lastest version of Firefox and it freezes every time i launch it. Please help me.
4d4aae27-34ee-4620-b349-c03002813b2003-Jan-1312:30 AM
54e24e0e-dfc4-466b-a347-4bd95536773e03-Jan-1312:30 AM
22d351d2-6461-4f33-9fbd-6d31f769e73103-Jan-1312:30 AM
8a8da99b-335e-43bb-aa12-4634aa0b431003-Jan-1312:30 AM
a15bb095-aeb9-44e1-a79c-1a17cee207d503-Jan-1312:28 AMNone if these crash reports seem to have been send.
Do you have crash reports with a "bp-" prefix that were submitted and that show a crashing thread?
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
You can use one of these to start Firefox in <u>Safe mode</u>:
*On Windows, hold down the Shift key while starting Firefox with a double-click on the Firefox desktop shortcut
*On Mac, hold down the Options key while starting Firefox
See also:
*http://kb.mozillazine.org/Firefox_crashes
*https://support.mozilla.org/kb/Firefox+crashes -
The bottom row of apps is unresponsive to touch. The slide lock in the same location works. Does anyone know how to fix this problem? I have tried restoring and updating. Thanks!
The bottom row of apps is unresponsive to touch. The slide lock in the same location works. Does anyone know how to fix this problem? I have tried restoring and updating. Thanks!
-
i can't change the brightness on my macbook pro. i tried the buttons on the keyboard, went to settings and tried to do it from there, didn't work. i have restarted my computer as well and that didn't make a difference. please help.
Reset the PRAM and SMC.
Barry -
my ipod touch screen has turned bright white. the things are visible but partially and when shift the screen it leaves trails behind. i dont know what to do help please.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
The speakers on my iPod Touch 2nd generation stopped working.
The speakers on my iPod Touch 2nd generation stopped working. The volume doesn't even register - can't turn it up or down. On occasion the headphones will work when plugged in. Turned it off and on, tried reset, nothing works. I bought it second hand so no AppleCare. What can I do?
Try restoring the iPod via iTunes on your computer. First from backup and if problem persists restore to factory defaults/new iPod.
Maybe you are looking for
-
Hello, I'm Gonzalo from Argentina, and i writing this to ask you some questions about the guarantee of a Blackberry 8520 and some problems that i have with the carrier. First of all, i bought a BlackBerry 8520 on February 23rd 2010 at Claro Argentina
-
Hi All, I have a simple Report in Apex 3.0 that displays 10 people in the format Firstname Surname. I have linked this Report to BI Publisher and my RTF Template is setup as: - Dear Firstname Surname The Report opens OK in either PDF or Word format,
-
Issue Logic 9 Crashing when new project is started
i have been having this drama with logic 9 over last few days first it was my mac pro playing up now logic, whenever i start up logic everything works fine then when i go to new project, one of my templates or open any project it freezes , what it sp
-
Any way around java.lang.VerifyError in JUTableSortModel.enableColumnSortin
Hi, (JDeveloper 10.1.2) I have created a ADF Client application on top of an POJO business service. The application contains a tabbed pane. The first tab is based on a master data control binding, the second on its details-collection data control - a
-
Contexts: I am very competent with GFX and have worked on many projects. When dragging an image onto a fresh canvas, the resizing feature presnaps the image into the canvas size. I can confirm that this has not happened to me in previous projects. I'