I have a flaw on the screen of my MacBook air . It looks like a bubble on a screen protector, but I don't have one. Anyone else have this problem?

Hi, i had the exact same problem and a searched google for any suggestions. In the end I just very gently scratched it off.

Similar Messages

TS1702 problem with updated find my iPhone app: when I attempt to open the FMi app, it tells me that I need to be a registered developer and run iOS7 to do so; is anyone else having this problem? I got the app as a regular update to my existing FMi app w

problem with updated find my iPhone (FMi) app: when I attempt to open the FMi app, it tells me that I need to be a registered developer and run iOS7 to do so; is anyone else having this problem? I got the app as a regular update to my existing FMi app which worked great.

The problem is being reported in the news media, yes. Apparently someone at Apple jumped the gun and uploaded the update before it was ready. They'll probably issue another update shortly, I would expect, but you can go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store. If you have a backup copy of the older version of the app, remove the newer version, restore the old version to iTunes on your computer, and resync.
Update: Well, that was certainly quick. As of a short time ago, various sites are reporting that the Find My iPhone app is no longer displaying the previous error message. If it still is for you, delete it from your iPhone and re-download from the iTunes Store.
Regards.

HT5242 Since installing this update today, screen flashing has increased dramatically; just wondering if anyone else has this problem and, is there a way to remove an update?

Since installing this update today, screen flashing has increased dramatically. Anyone else has this problem and is there a way to remove a software update?

I just had random letters flash like i was typing them but they didnt show up in the typed section. So weird, bad thing is that I didnt have the original keyboard flickering problem but updated anyway cause Im a fool i guess. It only happened while writing an email n was only the letters U n G.

HT201077 Since upgrading to IOS 7'photos taken on my iPhone are not transferring to the cloud. Sometimes a few will up load but then nothing for weeks. Anyone else had this problem

Since upgrading to IOS 7 the photographs I take on my iPhone 4S do not transfer to the cloud. Sometimes one or two of them transfer but then none for weeks. I have deleted photos from the cloud in case it is full but to no affect. I use my iPhone in conjunction with an iPad so this is driving me mad. Anyone else have this problem?

No you're not the only one having this problem in fact many people are having it I spoke to Apple support today about it. First it is my opinion the aspect ratio is different on iPhone 4s compared to iPhone 5s, however I really feel it is a software issue. Just to make sure I am having the same problem you are I will describe my issue. I Have confirmed the following: if I Center an object on my iPhone 4s screen and open the picture while I am still in the app (open on the bottom left it)looks fine. But when I open camera roll and open that particular picture it's also fine
Until I scroll left or right it pulls the image to the left side appearing to cut off the left side of the image. After talking to Apple support today and my knowledge with Apple products I strongly suspect this is a software issue. Apple asked me to do a restore as a new phone but I'm not going to go through all that nonsense when I believe it's a software issue and not a hardware issue. So again to recap to answer your question you're not alone, theses sort of things are expected when they rollout a new iOS just hang in there and let's see if they put a patch out for next update.

My screen goes black and exits certain apps. Anyone else having this problem.

When using some of my apps that require a screen shot, the screen will go black and then the app is exited automatically. How can I fix this?

This has happened from time to time - but was not Verizon Blocking the website, but the other way around, the website usually will have an out of date bogon filter. Verizon constantly is giving out new ip addresses to customers, sometimes with brand new IP Blocks as they get more and more customers. So sometimes the filters in websites, are out of date and don't include the newest ip blocks.
Usually you can engage the website owner, ask them to update their bogon filter list with your subnet, but if that is not easy, then you can turn off your router at night when you go to bed, the 4 hour lease on your ip address will break, 2 to four more hours pass, and your ip will go to a different customer, or cycled back into the cloud, and then when you wake up and turn it back on you will have a new ip, that is likely not blocked.
So give that a try. OR if you are in a rush and need it asap, then release your DHCP ip leave your modem off for at least 10-30 minutes, so your IP can get cycled back into the cloud and you can get a new one. if you do it too fast, then you will likely get the same ip and that defeats the purpose.

HT4623 After installing the above mentioned update, my ipad will no longer turn on. I have just a black screen with the apple logo when I attach it to a power source. Anyone else having this problem, please advise on how to fix.

After installing the above mentioned update, my ipad will no longer turn on. I have just a black screen with the apple logo when I attach it to a power source. Anyone else having this problem, please advise on how to fix.

IF RESET DOESN'T WORK, FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTunes and plug (very important)
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note: Data will be lost

IPad air2 suddenly freezes and the screen goes black, but sound continuesI have restored to factory setting and it was OK for a while yesterday it froze again. Anyone else got this problem

IiPad air2 suddenly freezes, the screen goes black but the sound is still on, I have taken it back to factory settings and it was OK then yesterday it froze again, only plugging it into my IMac got it going again. Anyone else got this problem?

Greetings jupiejupie,
Welcome to the Apple Support Communities!
I understand that your iPad is sporadically becoming unresponsive and the screen is turning black. In this situation, I would recommend reading over and working through the suggested steps in the attached article.
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
Cheers,
Joe

Hi i have an itouch 4th gen the problem is that the front cover has started to come away, looks like the glue is drying up, ive got older ones and they are still working fine. Has anyone else had this problem and if so what can be done about this. Thanks

Hi wondering if anyone can help me, i have an itouch 4 gen and the front cover has started to come away, it hasn't been dropped or anything just started to come away ( although i did notice that it was heating up drastically ) looks to me like the glue has dyed up and as usual the guarantee had not long ran out. Has anyone else has this problem if so what can be done about it. Thanks

SOme users have reported that their screen has come a little loose but very few.
Try fixing it yourself
iPod Touch Repair – iFixit

I have a 2008 imac with snow leopard. i installed update 10.9.3 not realizing it's best for Maverick's users. Now my Itunes 11.2.2 won't burn playlists to CD.   Anyone else with this problem? CAn I uninstall the 10.9.3 update?

i have a 2008 imac with snow leopard. i installed update 10.9.3 not realizing it's best for Maverick's users. Now my Itunes 11.2.2 won't burn playlists to CD.   Anyone else with this problem? CAn I uninstall the 10.9.3 update? Also my HP scannerwill not save the displayed scanned document since this update! it just saves gray.

If you have your old system backed up then erase the drive and restore your backup. If you don't have a backup then backup your entire Home folder. Erase the drive and install Snow Leopard after which you can restore your Home folder from the backup.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Or you can:
Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
     Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
     COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
     computer and after the chime press and hold down the OPTION key until the boot manager
     screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
     Reinstall the 10.9.3 update: OS X Mavericks 10.9.3 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Reinstall the 10.9.3 update: OS X Mavericks 10.9.3 Update (Combo).

I have a LG Lucid, and after the recent software update, my Outlook mail quit working. I have not been able to get it to import my e-mail. Anyone else with this problem?

I have a LG Lucid phone and after the recent LG software update, I have not been able to import my Outlook mail. Anyone else with this problem?

Connecting through email is extremely important these days donhinson. Let's get this fixed today. I first recommend removing the email account and readding it back to your device.This will help reset the settings. Listed below are steps to check the email settings, outgoing, and incoming servings.
1.From a home screen, select Apps (located in the lower-right).
2. Select Email.
3. From an Inbox, select Menu ( located below the display).
4.Select Account settings.
5.Select Account display name.
6.Enter an name then select OK.
7.Select My name.
8.Enter the name then select OK.
9.Select Signature.
10.Select the desired signature.
--To add a custom signature, select New signature (plus ( ) symbol located in the upper-right), enter the signature then 11. select Save.
12.Select Retrieve interval.
13.Select one of the following:
--Manual
--5 minutes
--10 minutes
--15 minutes
--30 minutes
--1 hour
--2 hours
--4 hours
--8 hours
14.Select Maximum emails to show.
15.Select one of the following:
--20 messages
--40 messages
--60 messages
--80 messages
--100 messages
--200 messages
--500 messages
--1000 messages
16.Select Delete from server.
17.Select one of the following:
--Never
--When I download from server
--When I delete from device
18. Configure the following as appropriate:
-- Enabled when a check mark is present.
--Forward message
--Forward attachment
19. Select Change login settings.
19. Ensure the following settings are correct then select Save:
--Username
--Password
--Email address
--INCOMING SERVER SETTINGS
--POP3 Server
--Secure type (e.g. Off, SSL, TLS)
--Port number
--APOP secure login
-- Enabled when a check mark is present.
--OUTGOING SERVER SETTINGS
--SMTP Server
--Secure type (e.g. Off, SSL, TLS)
--Port number
--Authentication. Enabled when a check mark is present.
--Username
--Password
I hope the information above is helpful.
KinquanaH_VZW

HT201317 Photos from my iphone and ipad are going into my photo stream on the devices but aren't going into the folder on my windows PC. They used to but they suddenly stopped. Has anyone else had this same problem?. I have checked all settings and they a

Photos from my iphone and ipad are going into my photo stream on the devices but aren't going into the folder on my windows PC. They used to but they suddenly stopped. Has anyone else had this same problem?. I have checked all settings and they appear OK

Hi AP_In_Surbiton,
I am really sorry that you have had so much trouble getting your Caller ID up and going. I'll be happy to help you out with this and get it working for you.
Could you drop me in an email please? Use the 'contact us' form in my forum profile under the 'about me' section. You can find it by clicking on my username.
Thx
Craig
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)”
td-p/30">Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

My MacBook Pro (purchased in 2011) is taking 10 minutes to boot-up. It's also taking much longer to open files. I have 650 GB out of 700 GB left on my machine so it's not that I've overloaded the memory. Is anyone else having this problem?

My MacBook Pro (purchased in 2011) is taking 10 minutes to boot-up. It's also taking much longer to open files. I have 650 GB out of 700 GB left on my machine so it's not that I've overloaded the memory. Is anyone else having this problem?

Look at this comprehensive trouble shooting document;
https://discussions.apple.com/docs/DOC-3353
I suggest that you start with SMC and PRAM resets.
Then a Safe Boot.
Ciao.

I have the latest version of Pages 5.2 but I keep getting a message saying I must download the newest version to open my file, has anyone else had this problem?

I have the latest version of Pages 5.2 but I keep getting a message saying I must download the newest version to open my file, has anyone else had this problem?

You have 2 versions of Pages on your Mac.
Pages 5.2 is in your Applications folder.
Pages '09/'08 is in your Applications/iWork folder.
You are alternately opening the wrong versions.
Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
Pages 5.01 can not open Pages 5.2 files and you will get the warning that you need a newer version.
Pages 5.2 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
Once opened and saved in Pages 5.2 files can not be opened in Pages 5.
Anything that is saved to iCloud is also converted to Pages 5 files.
All Pages files no matter what version and incompatibility have the same extension .pages.
Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
Apple has removed over 95 features from Pages 5 and added many bugs:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
Archive/trash Pages 5, after exporting all Pages 5 files to Pages '09 or Word .docx, and rate/review it in the App Store, then get back to work.
Peter

HT201263 my phone is in recovery mode and wont restore. instead i receive the error message 1604. i have used alternative usb cables and am at a loss. has anyone else had this problem?

Hi,
my phone is in recovery mode and wont restore. instead i receive the error message 1604. i have used alternative usb cables and am at a loss. has anyone else had this problem?

Hi there hstear93,
You may find the information in the article below helpful.
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
-Griff W.

After updating to 7.0.6 my iphone no longer shows in itunes. However it is recognised by my PC (windows 8) when click on my computer. I have tried reinstalling itunes and making sure the drivers are up to date. Has anyone else had this problem?

Hi guys. After updating to 7.0.6 my iphone 5s is no longer showing in itunes. Strangley it is recognised by my PC (windows 8) when I click on my computer. I have tried reinstalling itunes and making sure the drivers are up to date, but this has made no difference. Has anyone else had this problem or does anyone have any advice? Thanks

Device not detected in iTunes for Windows

I have a flaw on the screen of my MacBook air . It looks like a bubble on a screen protector, but I don't have one. Anyone else have this problem?

Similar Messages

Maybe you are looking for